2008 TOYOTA SEQUOIA ECU

OTHER FUNCTIONS
124
An antenna for the Bluetooth connec-
tion is built in the display. The indica-
tion of the Bluetooth
 connection may
turn yellow and the system may not
function when you use the Bluetooth

phone in the following conditions and
places.
Your cellular phone is hiding behind the
display (behind the seat or in the glove
box and console box).
Your cellular phone touches or is
covered with metal materials.
Leave the Bluetooth
 phone on the place
where “Blue” indication is displayed.
Bluetooth is a registered trademark of
Bluetooth SIG. Inc.
When you release your car:
A lot of personal data is registered
when you use the Handsfree system.
When you release your car, initialize
your data.
If you initialize it, the former state will never
come back again. Pay much attention
when initializing the data.
You can initialize the following data in the
system.
Phone book data
Dialed numbers and received calls
Speed dial
Bluetooth phone data
Security code
FCC ID: HYQDNNS016
IC ID: 1551ADNNS016
MADE IN JAPAN
This device complies with Part 15 of the
FCC Rules and RSS−210. Operation is
subject to the following two conditions:
(1) This device may not cause harmful
interference, and (2) This device must
accept any interference received, in-
cluding interference that may cause un-
desired operation.
CAUTION
FCC Warning:
Changes or modifications not ex-
pressly approved by the party re-
sponsible for compliance could void
the user’s authority to operate the
equipment.

OTHER FUNCTIONS
159
(f) Setting the security
When you set the security, you can pre-
vent people from using some functions
of the Handsfree system. It is useful
when you leave your car with the hotel
or you don’t want others to see the data
you registered.
When you set or unlock the security, you
have to input the security code. Be sure to
change the default code when you use the
security for the first time.Changing the security code
The security code is 4 digits and the de-
fault is “0000”.
Change a new code that is hard for other
people to know.
When you change the security code, don’t
forget the code. The dealers cannot unlock
the security when you forget it.
If you forget the security code, initialize
your personal data. When you initialize it,
not only the phone book data but also the
memory points in the navigation system,
etc. will be deleted. (See “Delete personal
data” on page 175.)
5U5157F
1. Touch “Phone Book Lock”.
5U5158F
2. Touch “Change”.

OTHER FUNCTIONS
160
5U5159F
3. Input the current security code.
Each time you touch , an inputted digit is
deleted.
5U5160F
4. Input the new code.
5U5161F
5. Touch “Yes”.
Phone Book Lock
When you set the phone book lock, you
can have the following functions
locked.
Display of the phone book screen and
transferring, registering, editing,
deleting the phone book data.
Display of speed dial screen,
registering, deleting the speed dial
and speed dialing.
Display of the other party’s name for
calls being received or made.
Display of dialed numbers screen and
received calls screen, deleting
dialed numbers and received
numbers.
Display of phone information screen.
Changing the security code.
When you set this function, the speed dial
screen is not displayed while you are driv-
ing.
5U5162F
1. Touch “ON”.
5U5163F
2. Input the security code and touch
“OK”.

OTHER FUNCTIONS
161 
Initializing the security code
You can initialize the settings.
5U5164F
1. Touch “Default”.
5U5165F
2. Input the security code and touch
“OK”.
5U5166F
3. Touch “Yes”.
Selecting a Bluetooth phone
In case you register more than one
Bluetooth
 phone, you need to choose
a favorite one.
5U5167F
1. Touch “Settings” to display “Set-
tings” screen.
5U5168F
2. Touch “Select Telephone” to dis-
play “Select Telephone” screen.
You can select the Bluetooth
 phone
from a maximum of 6 numbers.
“Empty” is displayed when you have not
registered a Bluetooth
 phone yet.
Bluetooth
 mark is displayed when you
choose the phone.
— Set a Bluetooth phone

OTHER FUNCTIONS
163 
Displaying Bluetooth information
You can see or set the information of the
Bluetooth
 phone on the system.
Device Name
The name of Bluetooth
 phone . . .
which is displayed on the screen.
You can change it into a desired
name.
Bluetooth
∗ Device Address
The address peculiar to the system. . . .
You cannot change it.
∗: Bluetooth is a registered trademark of
Bluetooth SIG. Inc.
5U5173F
1. Select the desired phone and touch
“Information”.
5U5174F
2. Touch “Change”.
5U5175F
3. When you complete the setting,
touch
.

OTHER FUNCTIONS
164 
Changing a device name
You can change a device name. If you
change a device name, the name regis-
tered in your cellular phone is not
changed.
5U5176F
1. Touch “Change”.
5U5177F
2. Use the software keyboard to input
the device name.
Changing the Bluetooth settings
You can change the display and settings of
Bluetooth
 information on the system.
The information displays the following
items.
Device Name
The name in the Bluetooth
 net- . . .
work. You can change it.
Passkey
The password when you register . . .
your cellular phone in the system.
You can change it into the figure of
4−8 digits.
Bluetooth
∗ Device Address
The address peculiar to the system. . . .
You can not change it. If you have
registered two Bluetooth
 phones
with the same Device Name or
Passkey and you cannot distin-
guish one from the other, refer to it.
∗: Bluetooth is a registered trademark of
Bluetooth SIG. Inc.

OTHER FUNCTIONS
175
The following personal data can be de-
leted or returned to their default set-
tings:
Information
Maintenance conditions
Maintenance information “off” set-
ting
Navigation system
Memory points
Areas to avoid
Previous points
Route trace
User selection settings
Handsfree system
Phone book data
Dialed numbers and received calls
Speed dial
Bluetooth phone data
Security code
This function is available only when the
vehicle is not moving.
5U5203F
1. Touch “Delete personal data”.
The “Delete personal data” screen ap-
pears.
5U5204F
2. Touch “Delete”.
The “Confirmation to delete all personal
data” screen appears.
5U5205F
3. Touch “Yes”.
Delete personal data

AUDIO/VIDEO SYSTEM
195
(h) If the satellite radio tuner malfunctions
When problems occur with the XM
 tuner, a message will appear on the display. Refer-
ring to the table below to identify the problem, take the suggested corrective action.
ANTENNA
The XM antenna is not connected. Check whether the
XM antenna cable is attached securely.
A short circuit occurs in the antenna or the surrounding
antenna cable. See a Toyota certified dealer for assis-
tance.
UPDATING
You have not subscribed to the XM Satellite Radio.
The radio is being updated with the latest encryption
code. Contact the XM
 Satellite Radio for subscription
information. When a contract is canceled, you can
choose the “CH000” and all free−to−air channels.
The premium channel you selected is not authorized.
Wait for about 2 seconds until the radio returns to the
previous channel or “CH001”. If it does not change au-
tomatically, select another channel. If you want to listen
to the premium channel, contact the XM
 Satellite Ra-
dio.
NO SIGNAL
The XM signal is too weak at the current location. Wait
until your vehicle reaches a location with a stronger sig-
nal.
LOADINGThe unit is acquiring audio or program information. Wait
until the unit has received the information.
OFF AIRThe channel you selected is not broadcasting any pro-
gramming. Select another channel.
−−−−−
There is no song/program title or artist name/feature
associated with the channel at that time. No action
needed.
−−−
The channel you selected is no longer available. Wait
for about 2 seconds until the radio returns to the pre-
vious channel or “CH001”. If it does not change auto-
matically, select another channel.
The XM Listener Care Center is also available on the phone, pleae call
1−800−967−2346 during the following hours∗:
Monday—Saturday: 6 a.m.—2 a.m. Sunday: 8 a.m.—8 p.m. (Eastern Time)
∗: Subject to change without notice