2008 TOYOTA LAND CRUISER audio

260
3−2. Using the audio system
Using the radio
Press or to choose either an AM or FM band.
LOAD
TYPEDISCSEEKTRACK
AMSATFMDISCAUXTRAF
12 3 4 56
TUNEFILE
PUSHAUDIO CONTROL
PWRVOL
TEXTSCAN
RAND RPT
1234 56DISCASLSCAN ADS FLD FILETR TRAFST MSGART
FORDER
PWRVOLSCANPWRVOLSCAN
ITY32C005
Scanning for receivable stations
Seeking the frequencyStation selector
AM/FM mode buttons
Changing the program typeAdjusting the frequency
Power Volume

261
3−2. Using the audio system
3
Interior features
Setting station presets
Search for desired stations by turning or pressing “ ” or
“ ” on .
Press and hold the button (from to ) the sta−
tion is to be set to, and you hear a beep.
Scanning radio stations
nScanning the preset radio stations
Press and hold until you hear a beep.
Preset stations will be played for a few seconds each.
When the desired station is reached, press once
again.
nScanning all radio stations within range
Press .
“SCAN” appears on the display and all stations with reception
will be played for a few seconds each.
When the desired station
is reached, press once
again.
STEP1
STEP 2
STEP 1
STEP 2
STEP 1
STEP 2

262 3−2. Using the audio system
RDS (Radio Data System)
This feature allows your radio to receive station identification informa−
tion and program information (classic
al, jazz, etc.) from radio stations
which broadcast this information.
n
Receiving RDS broadcasts
Press “ ” or “” on the during FM reception.
The type of program changes each time the button is pressed.
lROCK
l
EASYLIS (Easy listening)
lCLS/JAZZ (Classical music and Jazz)
l
R & B (Rhythm and Blues)
l
INFORM (Information)
lRELIGION
l
MISC (Miscellaneous)
l
ALERT (Emergency messages)
If the system receives no RDS stations, “NO PTY” appears on the display.
Press , or “ ” or “ ” on .
The radio seeks scans the station by the relevant program type.
If no radio station of that type is found, “NOTHING” appears on the
display.
nDisplaying radio station names
Press .
STEP1
STEP 2

263
3−2. Using the audio system
3
Interior features
nDisplaying radio text messages
Press .
If MSG is shown on the display, a text message will be displayed.
If the text continues past the end of the display, is displayed. Press
and hold until you hear a beep.
nTraffic announcement
Press .
“TRAF SEEK” appears on the display, and the radio will start seeking
any station broadcasting traffic program information.
If no traffic program station is found, “NO TRAF INFO” appears on the
display.
nWhen the battery is disconnected
All preset stations are erased.
nReception sensitivity
lMaintaining perfect radio reception at all times is difficult due to the con−
tinually changing position of the antenna, differences in signal strength
and surrounding objects, such as trains, transmitters, etc.
l
The radio antenna is mounted inside the rear quarter window. To main−
tain clear radio reception, do not attach metallic window tinting or other
metallic objects to the antenna wire mounted inside the rear quarter win−
dow.

264 3−2. Using the audio system
nCertifications for the radio tuner
This equipment has been tested and found to comply with the limits for a
class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. How−
ever, there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by trying one or more of
the following:
lReorienting or relocating the receiving antenna.
lIncreasing the separation between the equipment and receiver.
lConnecting the equipment into an outlet on a circuit different from that to
which the receiver is connected.
lConsulting the dealer or an experienced radio/TV technician for help.

265
3−2. Using the audio system
3
Interior features
Using the CD player
Insert a CD or press with a CD inserted.
LOAD
TYPEDISCSEEKTRACK
AMSATFMDISCAUXTRAF
12 3 4 56
TUNEFILE
PUSHAUDIO CONTROL
PWRVOL
TEXTSCAN
RAND RPT
1234 56DISCASLSCAN ADS FLD FILETR TRAFST MSGART
FORDER
PWRVOLSCANPWRVOLSCAN
ITY32C005
Search playback
CD eject
Random playbackRepeat play CD slot
CD insert
Display text message
CD selection Playback
Selecting a track,
fast forwarding
or reversing
Power Volume

266 3−2. Using the audio system
Loading a CDs
nLoading a single CD
Press .
“WAIT” appears on the display.
Insert a CD when the indicator on the slot turns from amber to
green.
The display changes from “WAIT” to “LOAD”.
nLoading multiple CDs
Press and hold until you hear a beep.
“WAIT” appears on the display.
Insert a CD when the indicator on the slot turns from amber to
green.
The display changes from “WAIT” to “LOAD”.
The indicator on the slot turns to amber when the CD is inserted.
Insert the next CD when the indicator on the slot turns from
amber to green again.
Repeat the procedure for the remaining CDs.
To cancel the operation, press or . If you do not
insert a CD within 15 seconds, loading will be canceled automati−
cally.
STEP1
STEP 2
STEP 1
STEP 2
STEP 3

267
3−2. Using the audio system
3
Interior features
Ejecting CDs
nEjecting a CD
To select the CD to be ejected, press “ ” or “ ” on
.
The number of the CD selected is shown on the display.
Press and remove the CD.
nEjecting all CDs
Press and hold until you hear a beep, then remove the
CDs.
Selecting a CD
nTo select a CD to play
Press “
” or “” on until the desired CD number
appears on the display.
nTo scan loaded CDs
Press and hold until you hear a beep.
The first 10 seconds of the first track on each CD will be played.
Press once again when the desired CD is
reached.
Selecting a track
Press “ ” to move up or “ ” to move down using
until the desired track number appears on the display.
STEP1
STEP 2
STEP 1
STEP 2