2008 TOYOTA LAND CRUISER ECU

13
A
CD IN
RAND RPTSCAN ALBDISC FLD ART TR FILE ST MEG TRAF
PLDGNP AUTOPART4 DISC OF OWNER
TYPEDISC
ITYPC037
AMGAT SCANFMDISCAUXTRAF
00H
M
Windshield wiper
de−icer switch
P. 257
ClockP. 339
Security indicator
light
P. 93
Audio system
P. 258
Front passenger AIR BAG
ON and AIR BAG OFF
indicatorP. 117
Front passenger’s seat belt
reminder light
P. 452
Air conditioning
system
P. 242
Rear air conditioning control
switch
P. 252
Emergency flasher
switch
Rear window defogger
switch
P. 256
Without navigation system
: If equipped

14
Pictorial indexInstrument panel
A
LOAD
TUNE·FILE
CHDISC
FMnTAPE PWR·VOL
SEEKTRACK
DISC·AUXSAT
AM
4 DISC OF OWNER
SCANLOGIC CONTROL DECK
SECURITYCLIMATEDESTMA
VOICEP
MENU
DISP
INFO
AUDIO
ITYPC038
Audio system*
Front passenger’s seat belt
reminder light
P. 452
Front passenger AIR BAG ON and
AIR BAG OFF indicator
P. 117
ClockP. 339Outside temperature
display
P. 340
Air conditioning
system
*
Emergency flasher
switch
Security indicator
light
P. 93
With navigation system
Rear window
defogger switch
*
Navigation system*

33
1−2. Opening, closing and locking the doors
1
Before driving
nNote for the smart key system
lEven when the electronic key is within the effective range (detection
areas), the system may not operate properly in the following cases.
The electronic key is too close to the window or outside door handle,
near the ground, or in a high place when the doors are locked or
unlocked.
The electronic key is near the ground or in a high place, or too close to
the rear bumper center when the back door is locked or unlocked.
The electronic key is on the instrument panel, floor or in the glove box
when the engine is started or “ENGINE START STOP” switch modes
are changed.
lAs long as the electronic key is within the effective range, the doors may
be locked or unlocked by anyone.
lEven if the electronic key is not inside the vehicle, it may be possible to
start the engine if the electronic key is near the window.
lThe doors may unlock if a large amount of water splashes on the door
handle, such as in the rain or in a car wash. (The doors will automatically
be locked after approximately 60 seconds if the doors are not opened
and closed.)
lGripping the door handle when wearing a glove may not unlock the door.
lIf the wireless remote control is used to lock the doors when the elec−
tronic key is near the vehicle, there is a possibility that the door may not
be unlocked by the smart key system. (Use the wireless remote control to
unlock the doors.)
lA sudden approach to the effective range or door handle operation may
prevent the doors from being unlocked.
In this case, return the door han−
dle to the original position and check that the doors unlock before pulling
the door handle.
nWhen the vehicle is not driven for extended periods
To prevent theft of the vehicle, do not leave the electronic key within 6 ft. (2
m) of the vehicle.
nSecurity feature
If a door is not opened within approximately 60 seconds after the vehicle is
unlocked, the security feature automatically locks the vehicle again.

54 1−3. Adjustable components (seats, mirrors, steering wheel)
Tumbling the second seats and third seat entry
For easy access to the third seat, perform in “Tumbling sec−
ond seats”. ( P. 5 5 )
n
Before tumbling second seats
Stow the seat belt buckles and
lower the head restraints to the
lowest position.
Pass the outer seat belts through
the seat belt hangers and secure
the seat belt plates.
This prevents the shoulder belt
from being damage.
Make sure that the seat belts are
removed from the hangers before
using them.
STEP1
STEP 1
ITY13C013a
STEP2

55
1−3. Adjustable components (seats, mirrors, steering wheel)
1
Before driving
nTumbling second seats
Fold down the seatback while
pulling the seatback angle
adjustment lever, and swing the
whole seat up and forward.
Hook the holding strap to the
assist grip and secure the seat
by pulling its free end.
When returning the second seat
to its original position, stow the
holding strap.
STEP1
STEP 2

57
1−3. Adjustable components (seats, mirrors, steering wheel)
1
Before driving
Tumbling the third seats
nBefore tumbling third seats
Stow the seat belts buckles.
Stow the center head restraint in the seat back. (P. 6 8 )
Pass the outer seat belts through
the seat belt hangers and secure
the seat belt plates.
This prevents the shoulder belt
from being damage.
Make sure that the seat belts are
removed from the hangers before
using them.
Stow the center seat belt tabs in the cover set in the roof.
(
P. 71)
ITY13C018
STEP1
STEP 2
ITY13C021a
STEP3
STEP 4

59
1−3. Adjustable components (seats, mirrors, steering wheel)
1
Before driving
Secure the seats by the strikers.
Remove the seat hook covers
from the back of the seat cush−
ion, and install them on the seat
hooks.
nReturning the third seats
Remove the seat hook covers
from the floor and install them
into the back of the seat cushion.
Unlock the seats by pulling the
stowed seat lock release levers
and lower the seats to its original
position.
ITY13C029
STEP4
ITY13C030
STEP5
STEP 1
STEP 2

60 1−3. Adjustable components (seats, mirrors, steering wheel)
Secure the seats by the strikers.
Pull the handle and raise the
seatbacks.
Raise the head restraints.
STEP3
STEP 4
STEP 5