2008 TOYOTA FJ CRUISER maintenance

[x] Cancel search: maintenance

Page 313 of 400

TOYOTA FJ CRUISER 2008 1.G Owners Manual 317
4−3. Do−it−yourself maintenance
4
Maintenance and care
 Front turn signal/parking and front side marker lights
Turn the bulb base counterclock−
wise.
Remove the light bulb.

Page 314 of 400

TOYOTA FJ CRUISER 2008 1.G Owners Manual 318 4−3. Do−it−yourself maintenance
 Back�up lights, stop/tail and rear
 side marker lights and rear
turn signal lights
Open the back door and remove
the cover.
Using a flathead screwdriver
whi

Page 315 of 400

TOYOTA FJ CRUISER 2008 1.G Owners Manual 319
4−3. Do−it−yourself maintenance
4
Maintenance and care
 License plate lights
Remove the screws and cover.
Remove the light bulb.
 Lights other than the above
If any of the lights listed be

Page 316 of 400

TOYOTA FJ CRUISER 2008 1.G Owners Manual 320 4−3. Do−it−yourself maintenance
 Condensation build�up on the inside of the lens
Contact your Toyota dealer for more information in the following situations.
Temporary condensation build−

Page 332 of 400

TOYOTA FJ CRUISER 2008 1.G Owners Manual 5
When trouble arises
337 5−2. Steps to take in an emergency
If the tire pressure warning system is inoperative
The tire pressure warning system may become inoperative in the follow−
ing conditio

Page 333 of 400

TOYOTA FJ CRUISER 2008 1.G Owners Manual 338 5−2. Steps to take in an emergency
CAUTION
Maintenance of the tire
Each tire, including the spare (if provided), should be checked monthly
when cold and inflated to the inflation pressure recom

Page 356 of 400

TOYOTA FJ CRUISER 2008 1.G Owners Manual 362
6−1. Specifications
Maintenance data (fuel, oil level, etc.)
Dimensions and weight
*: Unladen vehicle
Overall length 183.9 in. (4670 mm)
Overall width 75.0 in. (1905 mm)
Overall 
height*2WD mode

Page 382 of 400

TOYOTA FJ CRUISER 2008 1.G Owners Manual 388
6−2. Customization
Items to initialize
ItemWhen to initialize Reference
Engine oil maintenance 
dataAfter changing engine oil
P. 278
The following items must be init ialized for normal system op