2008 TOYOTA CAMRY HYBRID steering

[x] Cancel search: steering

Page 333 of 440

TOYOTA CAMRY HYBRID 2008 XV40 / 8.G Owners Manual 333
4-3. Do-it-yourself maintenance
4
Maintenance and care
12 DOOR NO.2 25 A Main body ECU
13 S/ROOF 30 A Electric moon roof
14 TAIL 15 A
Front side marker lights, tail lights, 
rear side marker light

Page 346 of 440

TOYOTA CAMRY HYBRID 2008 XV40 / 8.G Owners Manual 346
5-1. Essential information
Event data recorder
In a crash or a near car crash eventThe SRS airbag sensor assembly contains the EDR. In a crash or a
near car crash event, this device may record som

Page 349 of 440

TOYOTA CAMRY HYBRID 2008 XV40 / 8.G Owners Manual 5
When trouble arises
349
5-2. Steps to take in an emergency
Have the vehicle inspected immediately.
Failing to investigate the cause of  the following warnings may lead to
the system operating abnorm

Page 354 of 440

TOYOTA CAMRY HYBRID 2008 XV40 / 8.G Owners Manual 354 5-2. Steps to take in an emergency
■Customization
The vehicle speed linked seat belt reminder buzzer can be disabled. 
(P. 421)
However, Toyota recommends that the seat belt reminder buzzer b

Page 359 of 440

TOYOTA CAMRY HYBRID 2008 XV40 / 8.G Owners Manual 5
When trouble arises
359
5-2. Steps to take in an emergency
●
The following warning indicates  the possibility of damage to the
vehicle that may lead to an accide nt. Immediately stop the vehicle
i

Page 367 of 440

TOYOTA CAMRY HYBRID 2008 XV40 / 8.G Owners Manual 5
When trouble arises
367
5-2. Steps to take in an emergency
Once
Indicates that a 
door has been 
opened or 
closed and the 
“POWER” 
switch has been 
turned twice to 
ACCESSORY 
mode the 
“

Page 377 of 440

TOYOTA CAMRY HYBRID 2008 XV40 / 8.G Owners Manual 5
When trouble arises
377
5-2. Steps to take in an emergency
If the hybrid system will not start
Reasons for the hybrid system not starting vary depending on the
situation. Check the following and  pe

Page 378 of 440

TOYOTA CAMRY HYBRID 2008 XV40 / 8.G Owners Manual 378 5-2. Steps to take in an emergency
Emergency start function
When the hybrid system does not start, the following steps can be
used as an interim measure to start the hybrid system if the
“POWER