Downloaded from www.Manualslib.com manuals search engine OPERATING YOUR VEHICLE
Vehicle With Keyless Start System
63J270
The ignition switch can be operated with
out using an ignition key when the remote controller is in an area of the vehicle other
than the rear luggage area. To turn the
ignition switch, first push in the switch.
NOTE: You must push in the ignition switch to turn
it from the "LOCK" position to the "ACC" position. To return to the "LOCK" position
from the '~CC" position, turn the ignition
switch counterclockwise while pushing in the switch.
3-5
EXAMPLE
78K103
If the keyless start system blue indicator
light illuminates on the instrument cluster, you can turn the ignition switch. If the red indicator light illuminates, you can not turn
the ignition switch.
NOTE: • The ignition switch can be turned to the '~CC" position when the keyless start
system blue indicator light illuminates.
The blue indicator light will illuminate for
several seconds when you push in the
ignition switch and then will turn off to protect the system. In this case, you
must release the ignition switch and
push it in again to illuminate the blue
indicator light.
• If the keyless start system red indicator
light illuminates, the remote controller
may not be in the vehicle or the battery
of the remote controller may be unreliable.
NOTE: • If the battery of the remote controller
runs down or there are strong radio
waves or noise,
the operating range may
be narrower or the remote controller may
be inoperative.
• If the remote controller is too close to the door, it may not operate. • The ignition switch may not turn when the remote controller is on the instru
ment panel, in the glove box, in a stor
age compartment, in the sun visor or on the floor.
CAUTION
The remote controller is a sensitive electronic instrument. To avoid damaging the remote controller:
• Do not expose it to impacts, moisture or high temperature such as by leaving it on the dashboard under
direct sunlight.
• Keep the remote controller away
from magnetic objects such as a television.
You can also turn the ignition switch by inserting the ignition key into the slot.
If you leave any of the doors open with the
ignition switch in the "ACC" position for a
while (and no key inserted), the engine
may not start when you turn the ignition
