2008 SUZUKI GRAND VITARA window

Downloaded from www.Manualslib.com manuals search engine (Battery label)
1----(5)
Pb-(6)
51KM042
(5) Crossed-out wheeled bin symbol (6) Chemical symbol of "Pb"
The crossed-out wheeled bin symbol (5) located on the battery label indicates that
used battery should be collected sepa­rately from ordinary household waste.
The chemical symbol of "Pb" (6) indicates
the battery contains more than 0.004%
lead.
By ensuring the used battery is disposed
or recycled correctly, you will help prevent
potential negative consequences for the
environment
and human health, which could otherwise be caused by inappropri­
ate waste handling of the battery. The
recycling of materials
will help to conserve natural resources. For more detailed infor­
mation about disposing or recycling of the
used battery,
consult your SUZUKI dealer.
Fuses
Your vehicle has three types of fuses, as described below:
Main fuse The main fuse takes current directly from
the battery.
Primary fuses· These fuses are between the main fuse
and individual fuses, and are for electrical
load groups.
Individual fuses These fuses are for individual electrical cir­
cuits.
INSPECTION AND MAINTENANCE
The main fuse and primary fuses are located in the engine compartment. If the
main fuse blows, no electrical component will function. If a primary fuse blOWS, no electrical component in the corresponding load group will function. When replacing
the main fuse or a primary fuse, use a gen­
uine
SUZUKI replacement.
PRIMARY INDIVIDUAL FUSE
FUSE
60A LAMP
Head light, Accessory,
Dome light, Sunroof,
Hazard light, Door lock, Rear fog light, Stop
lamp, Tail light
50A
IGN 2 WiperlWasher, Power window, Seat heater
40A 4WD 4WD actuator
30A RDTR 1 Radiator fan
30A RDTR 2 Radiator fan
7-30

Downloaded from www.Manualslib.com manuals search engine INSPECTION AND MAINTENANCE
Fuse under the Dash Board
Fuse box
(For
Gasoline and Diesel Engine Model)
64J192
~]~ jBBBBBBBBBBBID rn~j >" Zm °0
~8B8BBBBBB8B D ~m moo ~~ oo> ~ BE] D g~ ,<0
79K057
7-33
(A)
(B)
(C)
(D)
(E)
(F)
(G)
(H)
(I)
(J)
(K) (L)
(M) (N)
(0)
(P)
(0)
(R)
(S)
10A DOME
10A STOP
7.5A RRFOG
15A ACC3
10A CRUISE
15A ACC2
20A WIP
15A IG2SIG
10A BACK
10A ABS/ESP
10A AlB
15A RADIO
15A
HAZ
7.5A
SRSIG
10A ECM
25A
SIR
25A BIU
10A TAIL
20A OIL
Dome lamp fuse (T)
15A
ACC Radio,
Remote door
mirror fuse
Stop
lamp fuse (U) 10A METER Meter fuse
Rear fog
light fuse (V) 10A IGCOIL Ignition coil fuse
Accessory socket
fuse (W)
--Blank
Cruise control fuse (X) 30A P/w Power
window fuse
Cigar
or Accessory
socket fuse
Wiper fuse
Ignition signal & Seat
heater fuse
Back
lamp fuse
ABS or ESP control-
ler fuse
Air bag fuse
Radio fuse
Hazard
light fuse
Starter
signal fuse
Engine
control mod-ule fuse
Sun roof motor fuse
Buck up fuse
Tail light fuse
Door
lock actuator
fuse

Downloaded from www.Manualslib.com manuals search engine (2)
64J183
3) Close the tailgate. Remove a high­
mounted stop light housing (2) from the tailgate.
64J184
4) Remove the each bulb. 5) Replace the bulbs. To install a high-mounted stop light housing in the reverse order of removal.
INSPECTION AND MAINTENANCE
Wiper Blades
54G129
If the wiper blades become brittle or dam­
aged, or make streaks when wiping,
replace the wiper blades.
To install new wiper blades, follow the pro­
cedures below.
CAUTION
To avoid scratching or breaking the
window, do not let the wiper arm
strike the window while replacing the
wiper blade.
NOTE: Some wiper blades may be different from
the ones described here depending on
vehicle specifications.
If so, consult your SUZUKI dealer for proper replacement
method.
7-42