2008 SMART FORTWO COUPE warning

Seats
92
>> Controls.G
Warning!
All seat adjustments, as well as fastening
of seat belts, must be done before the
vehicle is operated.G
Warning!
When adjusting the seat, make sure that
no one becomes trapped.
Do not adjust the driver’s seat while
driving. Adjusting the seat while driving
could cause the driver to lose control of
the vehicle.
Never ride in a moving vehicle with the
seat backrest in an excessively reclined
position as this can be dangerous. You
could slide under the seat belt in a colli

sion. If you slide under the seat belt, it
could apply force at the abdomen or neck,
potentially causing serious or fatal inju

ries. The seat backrest and seat belts
provide the best restraint when the
wearer is in a position that is as upright
as possible and seat belts are properly
positioned on the body.
Your seat must be adjusted so that you
can correctly fasten your seat belt
(
page 98).
Observe the following points:
• Adjust the seat backrest until your
arms are slightly angled when holding
the steering wheel.
• Adjust the seat to a comfortable
seating position that still allows you to
reach the accelerator/brake pedal
safely. The position should be as far to
the rear as possible, consistent with
ability to properly operate controls.
• Never place hands under the seat or
near any moving parts while a seat is
being adjusted.
Failure to do so could result in an acci

dent and/or serious personal injury.
Observe the notes on the air bag system
(
page 54).
G
Warning!
Children 12 years old and under must be
seated and properly secured in an
appropriately sized infant restraint,
toddler restraint, or booster seat recom

mended for the size and weight of the
child. For additional information, see
"Children in the vehicle" (

page 65).
A child’s risk of serious or fatal injuries
is significantly increased if the child re

straints are not properly secured in the
vehicle and/or the child is not properly
secured in the child restraint.

Seats
>> Controls.
93
1
Seat backrest tilt
2
Seat fore and aft adjustment
Seat backrest tilt> Adjusting: P u l l a d j u s t m e n t l e v e r
1 upwards
and adjust the seat backrest until your arms
are slightly angled when holding the steer

ing wheel.
>Release adjustment lever
1 when the
desired seat backrest tilt is reached.
When you hear an audible click, the seat
backrest is again fixed into place.
>Check for proper engagement before
driving.
Seat fore and aft adjustment> Adjusting: Pull adjustment handle
2
upwards and slide the seat to a seating
position that still allows you to reach the
accelerator/brake pedal safely.
>Release adjustment handle
2 when the
desired seating position is reached.
When you hear an audible click, the seat is
again fixed into place.
>Check for proper engagement before
driving.
Seat heightThe seat guide is inclined in the horizontal
plane. Seat fore and aft adjustment also alters
the seat height.
G
Warning!
Contact an authorized smart center if the
seats have become damaged.
The seat is an integral part of the vehi

cle's safety system in the same way as
seat belts and air bags. Damage to the
seats may reduce their ability to protect
the occupants in an accident.P91.10
2993
31

Seats
94
>> Controls.
Passenger seatYou can expand the cargo compartment by
folding down the passenger seat.!
Observe the loading guidelines
(
page 161).
Folding down
1
Seat belt guide
>Remove the seat belt from seat belt
guide
1.
>Move the passenger seat backward as far as
it will go.
2
Adjustment lever
>Hold the backrest with one hand back.
>Pull adjustment lever
2 upwards and
unlock the seat backrest.
>Fold the seat backrest forward.
Folding back
>Pull adjustment lever2 upwards and
unlock the seat backrest.
>Fold the seat backrest backward.
When you hear an audible click, the seat
backrest is again fixed into place.>Check for proper engagement before
driving.
>Place the seat belt back in seat belt
guide
1.
P91.45
2016
31
P91.10
2994
31
G
Warning!
When folding the passenger seat back

rest back to its upright position, please
make sure that
• nobody becomes trapped
• no obstacles are jammed in the lock
• the adjustment lever has audibly
locked into position
A proper engaged passenger seat
backrest will help to prevent stored
objects in the cargo compartment from
being thrown about and injuring vehicle
occupants during
•braking
•vehicle maneuvers
• an accident

Mirrors
96
>> Controls. Adjust the interior and exterior rear view
mirrors before driving so that you have a
good view of the road and traffic conditions.
Exterior rear view mirrors
Manually adjustable exterior rear view
mirrors1
Adjustment lever
> Adjusting: Move adjustment lever
1 up,
down, left, or right to the desired setting.Power exterior rear view mirrors
1
The operating control is on the door control
panel.1
Knob for selecting the mirror
2
Adjustment button
G
Warning!
Exercise care when using the passen

ger
side exterior rear view mirror. The
mirror surface is convex (outwardly
curved surface for a wider field of view).
Objects in mirror are closer than they
appear. Check your interior rear view
mirror and glance over your shoulder to
determine whether any vehicles are in
the 'blind spot' of your field of vision,
before changing lanes.P88.70
2408
31
1 Model passion only.
P54.25
5342
31

Seat belts
98
>> Controls.
Fastening the seat beltsG
Warning!
Always fasten your seat belt before driv

ing off. Always make sure your passenger
is properly restrained.
Failure to wear and properly fasten and
position your seat belt greatly increases
your risk of injuries and their likely
severity in an accident. You and your
passenger should always wear seat belts.
If you are ever in an accident, your inju

ries can be considerably more severe
without your seat belt properly buckled.
Without your seat belt buckled, you are
much more likely to hit the interior of the
vehicle or be ejected from it. You can be
seriously injured or killed.
In the same crash, the possibility of
injury or death is lessened if you are
wearing your seat belt. The air bags can
only provide the protection they where
designed to afford if the occupants are
using their seat belts (

page 54).
G
Warning!
Children 12 years old and under must be
seated and properly secured in an
appropriately sized infant restraint,
toddler restraint, or booster seat recom

mended for the size and weight of the
child. For additional information, see
"Children in the vehicle" (

page 65).
A child’s risk of serious or fatal injuries
is significantly increased if the child re

straints are not properly secured in the
vehicle and/or the child is not properly
secured in the child restraint.
G
Warning!
Never let more people ride in the vehicle
than there are seat belts available. Be
sure everyone riding in the vehicle is
correctly restrained with a separate seat
belt. Never use a seat belt for more than
one person at a time.

Seat belts
>> Controls.
99
1
Seat belt outlet
2
Latch plate
3
Release button
4
Seat belt buckle
5
Seat belt guide> Fastening the seat belt: With a smooth
motion, pull the seat belt out of seat belt
outlet
1.
>Place the shoulder portion of the seat belt
across the top of your shoulder and the lap
portion across your hips.
>Push latch plate
2 into seat belt buckle
4
until it clicks.
>If necessary, tighten the lap portion of the
seat belt to a snug fit by pulling shoulder
portion up.
> Unfastening the seat belt: Press release
button
3.
>Allow the retractor to completely rewind the
seat belt by guiding latch plate
2.
G
Warning!
Never ride in a moving vehicle with the
seat backrest in an excessively reclined
position as this can be dangerous. You
could slide under the seat belt in a colli

sion. If you slide under the seat belt, it
could apply force at the abdomen or neck,
potentially causing serious or fatal inju

ries. The seat backrest and seat belts
provide the best restraint when the
wearer is in a position that is as upright
as possible and seat belts are properly
positioned on the body.G
Warning!
Read and observe the additional warning
notices printed in the "Safety" section
(
page 56).P91.40
2702
31

Seat belts
100
>> Controls. Proper use of seat belts
• Do not twist the seat belt when fastening.
• Adjust the seat belt so that the shoulder
portion is located as close as possible to
the middle of the shoulder (it should not
touch the neck). Never pass the shoulder
portion of the seat belt under your arm.
• Position the lap belt as low as possible on
your hips (over hip joint) and not across the
abdomen.
• Place the seat backrest in a position that is
as upright as possible.
• Never use a seat belt for more than one
person at a time.• Do not fasten a seat belt around a person
and another object at the same time. When
using a seat belt to secure infant or toddler
restraints or children in booster seats,
always follow the child seat manufacturer’s
instructions.
• Check your seat belt during travel to make
sure that it is properly positioned.
• Make sure that the seat belt is always fitted
snugly. Take special care to maintain a snug
fit when wearing loose clothing.
G
Warning!
Do not pass seat belts over sharp edges.
They could tear.
Do not allow the seat belt to get caught in
the door or in the seat adjustment mech

anism. This could damage the seat belt.
Never attempt to make modifications to
seat belts. This could impair the effec

tiveness of the seat belts.
Do not bleach or dye seat belts as this
may severely weaken them. In a crash
the y m ay no t be abl e to p r ovid e a de qu a te
protection.
Damaged seat belts or seat belts that
were highly stressed in an accident must
be replaced. Contact an authorized smart
center.

Lighting
102
>> Controls. Parking lamps
You can switch on and off the parking lamps
with exterior lamp switch using the manual
headlamp mode.
>Switching on: Turn the exterior lamp switch
to positionC.
The parking lamps come on.
The following lamps also come on:
• Tail lamps
• License plate lamps
• Side marker lamps
Low beam headlamps
You can switch on and off the low beam
headlamps with exterior lamp switch using the
manual headlamp mode.>Switching on: Turn the exterior lamp switch
to positionB.
The low beam headlamps come on.
The low beam headlamp indicator lamp¡
in the instrument cluster comes on.
The following lamps also come on:
• Tail and parking lamps
• License plate lamps
• Side marker lamps
Automatic headlamp mode
1
The following lamps come on and go out auto

matically depending on the brightness of the
ambient light:
• Low beam headlamps
• Tail and parking lamps
•License plate lamps
• Side marker lamps1 Vehicles with rain
light sensor* only.
G
Warning!
If the exterior lamp switch is set to
positionU, the headlamps will not be
automatically switched on under foggy
conditions.
To minimize risk to you and to others,
activate headlamps by turning exterior
lamp switch to positionB when
driving or when traffic and/or ambient
lighting conditions require you to do so.
In low ambient lighting conditions, only
switch from positionU toB with
the vehicle at a standstill in a safe
location. Switching from positionU
toB will briefly switch off the
headlamps. Doing so while driving in low
ambient lighting conditions may result in
an accident.
The automatic headlamp feature is only
an aid to the driver. The driver is
responsible for the operation of the
vehicle’s lights at all times.