2008 SMART FORTWO COUPE Owners Manual

Instrument cluster
136
>> Controls.
Multifunction displayThe following displays and indicators appear
in the multifunction display:1
Status indicator with:
• Trip odometer display
• Maintenance service interval display
• Reserve fuel display
2
Main odometer display or when active
distance to next maintenance service
3
Transmission position indicator
4
Digital clock
5
Outside temperature display
6
Fuel level displayMultifunction display illumination
The multifunction display illumination comes
on when the starter switch is in position1.
It goes out after approximately 30 seconds
when the starter switch is in position0.
For adjusting the multifunction display
illumination, see "Adjusting instrument clus

ter illumination“ (

page 141).Fuel level display/reserve fuel indicator
Fuel level display
The fuel level display shows the tank's fuel
level with the aid of eight segments. The num

ber of dark segments indicates the fuel level
in the tank.
If all eight segments are dark, the tank is full. P54.32
5174
31
G
Warning!
No messages will be displayed if either
the instrument cluster or the multifunc

tion display is inoperative.
As a result, you will not be able to see
information about your driving condi

tions, such as speed, outside tempera

ture, or warning/indicator lamps. Driving
characteristics may be impaired.
If you must continue to drive, please do
so with added caution. Visit an authorized
smart center as soon as possible.P54.32
5176
31

Instrument cluster
>> Controls.
137
Reserve fuel indicator
You are driving on reserve fuel if there are no
more than 1.0 US gal (3.78 l) of fuel in the
tank.
If this occurs,
• the fuel pump symbol in the fuel level
display flashes
• the reserve fuel indicator shows the fuel
level in the tank at exactly 0.1 US gal (0.5 l)
Transmission position indicator
The following information is displayed in the
transmission position indicator:
• Current gear selector lever position
• Current engaged gear (when manual
gearshifting selected)i
A flashing
in the display indicates that
the gear selector lever is in position R but the
reverse gear is not engaged. Stop the vehicle
to let the reverse gear engage.When manual gearshifting is selected:
Display
Function

Gear selector lever in park
positionP

Gear selector lever in
positionR (Reverse gear
engaged)

Gear selector lever in neutral
positionN

Gear selector lever in drive
positionD
Display
Function

First gear engaged

Second gear engaged

Third gear engaged

Fourth gear engaged

Fifth gear engaged

Instrument cluster
138
>> Controls.
Selecting display for status
indicatorYou can select the information to be displayed
in the status indicator:
• Trip odometer display (

page 139)
• Maintenance service interval display
(

page 139)
• Reserve fuel indicator (

page 140)
1
Selecting display for status indicator/
setting the clock/activating maintenance
service interval display
2
Setting the clock/adjusting instrument
cluster illuminationDigital clock
> Activating time setting: Press right
button
2 (
page 138) for approximately
five seconds.
The colon in the digital clock starts
flashing.
> Setting the time in 1 minute increments:
Press left button
1 or right button
2
(

page 138) repeatedly until the desired
time is set.>Setting the time quickly: Press left
button
1 or right button
2 (
page 138)
for longer than one second.
The setting speed accelerates.
> Setting the time in 10 minute increments:
Press left button
1 or right button
2
(

page 138) for longer than five seconds.
The time is set in 10 minute increments.
>Confirm time setting: Refrain from pressing
either left button
1 or right button
2
(

page 138) for more than five seconds.
The colon in the digital clock stops flashing.
The time is set.
i
The digital clock in the multifunction
display is not synchronized with the cockpit
clock*.
P54.32
5178
31

Instrument cluster
>> Controls.
139
Trip odometer display
> Selecting trip odometer display: Press left
button
1 (
page 138) repeatedly until the
trip odometer display appears in the status
indicator.
> Resetting trip odometer display: Press and
hold left button
1 (
page 138) until the
value is set to
.Maintenance service interval display
The maintenance service interval display will
notify you approximately one month before
the next maintenance service is due.
The maintenance service interval display also
shows the type of maintenance service that is
due.
After starting the engine, the maintenance
service interval display shows this informa

tion in miles (km) or in days for approximately
ten seconds.>Start the engine.
> Selecting maintenance service interval
display: Press left button
1 (
page 138)
repeatedly until the maintenance service
interval display appears in the status
indicator.
Depending on the type of maintenance
service that is due, symbol¬ or}
is dis

played.
> Clearing maintenance service interval
display: Press the left button on the
instrument cluster (

page 138).
The maintenance service interval display is
cleared.
> Activating maintenance service interval
display: Press the left button on the instru

ment cluster (

page 138) twice in quick
succession. P54.32
5177
31
P54.32
5179
31

Instrument cluster
140
>> Controls. Reserve fuel indicator
> Selecting reserve fuel indicator: Press left
button
1 (
page 138) repeatedly until the
reserve fuel indicator appears in the status
indicator.
i
The reserve fuel indicator is only
displayed when driving on reserve fuel.
For more information on the reserve fuel indi

cator, see "Fuel level display/reserve fuel in

dicator" (

page 136).
Auxiliary instruments*1
Tachometer
2
Cockpit clock
Tachometer*
The tachometer can be turned by
approximately 90°.
The tachometer illumination comes on when
you turn the key in the starter switch in
position1.
The tachometer displays the engine speed in
units of 1000 rpm.
!
Do not hang any objects on the
tachometer.
This could cause the tachometer to be torn
from its mountings and damage it.
Cockpit clock*
The cockpit clock can be turned by
approximately 90°.
The cockpit clock illumination comes on when
you turn the key in starter switch to position1
and the parking lamps are switched on. P68.10
3616
31

Instrument cluster
>> Controls.
141
The buttons for setting the time are on the top
of the cockpit clock.1
Setting the time forward
2
Setting the time back> Setting the time forward in 1 minute
increments
: Press button
1 repeatedly
until the desired time is set.
> Setting the time forward quickly: Press
button
1 for longer than two seconds.
The setting speed accelerates.
> Setting the time back in 1 minute
increments: Press button
2 repeatedly
until the desired time is set.
> Setting the time back quickly: Press
button
2 for longer than two seconds.
The setting speed accelerates.
!
Do not hang any objects on the cockpit
clock.
This could cause the cockpit clock to be torn
from its mounting and damage it.
Adjusting instrument cluster
illuminationYou can adjust the illumination of the
switches, the dials in the instrument cluster,
the radio*, the climate control* panel and the
auxiliary instruments*.
Five settings are possible.
>Make sure that the key in the starter switch
is turned to position1.
>Switch on the parking lamps.
> To brighten or dim illumination: Press right
button
2 (
page 138) repeatedly until the
desired setting is reached.
The current setting is stored. P68.10
3615
31

Audio system*
142
>> Controls.
G
Warning!
In order to avoid distraction which could
lead to an accident, the driver should
enter system settings with the vehicle at
a standstill and operate the system only
when road and traffic conditions permit.
Always pay full attention to traffic condi

tions first before operating system con

trols while driving.
Bear in mind that at a speed of just
30 mph (approximately 50 km/h), your
vehicle is covering a distance of 44 feet
(approximately 14 m) every second.
G
Warning!
Always select a volume that allows you to
still hear ambient sound in your immedi

ate vicinity (e.g. horns, emergency res

cue vehicles, police vehicles, etc.). You
could otherwise cause an accident.
G
Warning
If you wish to have a radio other than an
original smart radio fitted in your vehi

cle, please always have the necessary
work performed at an authorized smart
center.
This is particularly important if your ve

hicle is fitted with a radio preinstallation.
Improper connection can result in the
failure of important vehicle functions,
thereby endangering the operating
safety of your vehicle and thus your own
safety and that of other people.

Audio system*
>> Controls.
143
The following pages contain a brief descrip

tion of the audio systems available for the
coupé and cabrio.
The devices are described with their full
complement of equipment, including radio
mode and CD changer* mode. The description
for your individual equipment specification
applies.
Please refer to the separate operating
instructions for detailed functions.
smart radio 9*The smart radio 9 system contains the
following functions:
•Radio (FM/AM)
•CD player
• RDS (Radio Data System)
•AUX
socket (

page 144)
!
Please be sure to read the operating in

structions for the smart radio 9 before using
the unit. Familiarize yourself with the various
functions of the unit so that you are able to
operate it easily, reliably and correctly at any
time.
1
On/off switch
2
Random button
3
Station buttons
4
Display
5
CD eject button
6
Control panel for selecting functions for
radio, CD, AUX
7
Control panels for selecting functions for
tone settings, menu, TA (Traffic An

nouncements), frequency band
8
Volume
P82.86
6053
31