2008 Seat Leon 5D RADIO-NAVIGATION 300 MP3

Navigation
46
– Press the button and then the function button to access the destination memor ⇒page 45, fig. 23
– Select the options from the list by turning and pushing the menu knob.Recent destinations
A list of the 25 most recent destinations will be displayed. When the list is full,
the oldest entries will automatically overwritten by the newest destinations
entered. The option may be used to erase all of the latest destinations
altogether or one by one ⇒page 48, “Navigation settings (SETUP)”.
Special destinations nearby
This may be used to select a special destination close to the current position
or the destination.
The following options are available for the surroundings of the current posi-
tion:
– Closest car park
– Closest service station
– Closest SEAT dealer
– Closest restaurant
The following are the options for the destination surroundings:
– Hotel close to the destination
– Restaurant close to the destination
– Parking area close to the destination
Load from the destination memory
Shows a list of destinations from the memory Select a destination from the
list using the menu button. Save to the destination memory
The entered destination is saved to memory. The equipment automatically
proposes a name for the destination.
This may be confirmed or changed.
The memory has a capacity for 100 destinations. If this is full, a destination
must be erased be fore saving another.
To assign a name to a destination, consult the ⇒page 47, “Character input
mask”.
If a “route with intermediate destinations” has been taken ⇒page 42, the
complete itinerary is displayed. Select the destination from the itinerary to be
memorized using the menu button. To memo rize the complete itinerary, go to
the previous option using the button and select Save itinerary (see
below).
To edit the destination memory
The screen Edit the destination memory may be used to erase all of the desti-
nations using the option Erase the destination memory or modify one of the
displayed destinations. For this, select the destination to be modified by
rotating and pressing the menu button.
The following possibilities are available:
Pressing Name: ... access is given to a screen ⇒page 45, fig. 24 that may be
used to change an existing name ⇒page 47, “Character input mask”. The
changes are confirmed using and are then accepted using Save entry.
Pressing Show as a nearby destination the destination is displayed in the
main navigation menu so that it may be selected more rapidly. Enter, for
example, your address, save with the na me “home” and activate the function
Show as nearby destination (a point appears in the right hand side box). To
take the route for home, the button is pressed and the option “home”
is selected from the menu.
Save entry – Save changes.
Erase entry – Erase the memory entry.
NAV
MEMORY
SETUP
OK
NAV
RNS MP3_ingles Seite 46 Mittwoch, 10. Mai 2006 7:52 19

Navigation47
In the lower part of the list, details of the selected destination are displayed.
Load itineraries
A list of recorded itineraries is displayed. Select an itinerary from the list
using the menu button.
Save an itinerary
An itinerary entered in the destination memory is saved. The equipment auto-
matically proposes a name for the itinerary. This may be changed using the
menu button ⇒ page 47, “Charac ter input mask”.
Up to six itineraries may be saved, each one with a final destination and a
maximum of six stages. If there are already six itineraries saved, one must be
erased before saving another.
Erase itineraries
It is possible to erase the itineraries one by one or all at the same time.
Save position
This saves the actual position in me mory as a destination. The proposed
name may be modified on the display ⇒page 47, “Character input mask”.
Flagged destination
Press to save the current position in the destination memory. The flagged
destination is saved with the time ( FLAG DEST HH:MM); it may be renamed or
saved using the option Edit the destination memory. When the button is
pressed again, the flagged destination will be overwritten if it has not been
stored in the destination memory ⇒ page 46, “To edit the destination
memory”.
Character input mask
The letters and digits ⇒page 45, fig. 24 are selected by rotating the menu
button and are added to the corresponding line pressing.
A mark may be displayed under certain letters. If these letters are selected
and some seconds go by, the special characters will appear. The corre- sponding character is selected by ro
tating and pressing the menu button (in
the example, the characters derived from “Y”: ⇒page 45, fig. 24 ).
– Arrows to the left and to the right. These move the cursor in the corre-
sponding direction.
– This erases the characters one by one, beginning from the right.
– To leave the character input mask. Changes must still be saved.
Note
•
If “Route with intermediate destinations” is selected, the last destination
or last itinerary is added. The selected destination may be moved to the
required position in the itinerary usin g the menu button, if only one destina-
tion is required, first deactivate the Route with stages option in the “route
options” (access using the menu ⇒page 42, fig. 21 ).
•
The options between square brackets [ ... ] can not be selected because
they do not conform to the conditions. The options Load itinerary and Save
an itinerary, for example, can only be selected if the corresponding
menu option is available ⇒page 42, fig. 21.
•
A destination will not be stored in Last dest. until destination guide has
started.
•
The memory has a capacity for 100 destinations. If you are not able to
store any more destinations, the destination memory is full. A destination
must be erased from the me mory before saving another.



ERASEOK
ROUTE
ROUTE
RNS MP3_ingles Seite 47 Mittwoch, 10. Mai 2006 7:52 19

Navigation
48Other settingsNavigation settings (SETUP)
The navigation SETTINGS menu may be used to erase itiner-
aries and destinations, to begin a demonstration trip or to
make changes to the destination guide.– Press the button followed by the button.
– Select the options from the list by turning and pushing the menu
knob.
– The adjustments are made by rotating and pressing the menu button.The following adjustments may be made:
Audio instructions
On – The equipment emits audio instruct ions concerning the route during the
destination guide.
Off – The audio instructions remain d eactivated during operation. Only the
route is displayed ⇒page 53, fig. 26 .
Auto – The audio instructions are deac tivated during telephone conversa-
tions. Only the route is displayed .
Demonstration mode
To activate or deactivate the demonstr ation mode. With this mode activated,
navigation to a destination may begin. The equipment will simulate naviga-
tion from the current position to the entered destination. It is also possible to
manually enter the current position for a demonstration trip (see also
⇒ page 48, “To manually enter the current position”). Time
Duration
– Indicates the approximate remaining trip duration or time to
completion of a stage.
Arrival – Indicates the approximate time of arrival to the destination or next
stage.
Erase last destinations
To erase a specific destination – The list of the last destinations is displayed
so that the destination to be erased may be selected.
Erase all – This erases all of the last destinations following confirmation.
To erase itineraries
To erase a specific itinerary – The list of the last itineraries is displayed so
that the itinerary to be erased may be selected.
Erase all – This erases all of the last itineraries following confirmation.
Tyre chan ge
The navigation system calculates the dist ance covered by the rotation of the
wheels. If the wheel diameter is cha nged, then navigation precision is
reduced, for example, audio indications may not be synchronous. Pressing
Begin tyre calibration the navigation system may be adapted to different size
wheels.
To manually enter the current position
The navigation system will need some time for an exact definition of your
position if you have transported your vehicle using the train or a ferry. Your
position can be entered manually if the automatic definition is not
successful.
The manual position input can be used to calculate a route between any two
points regardless of where the vehicle is actually located (for this use the
function ⇒page 48, “Demonstration mode”).
After selecting the option Enter position manually, an address may be speci-
fied as the current position in the menu that appears. Once the street has
NAV
SETUP
RNS MP3_ingles Seite 48 Mittwoch, 10. Mai 2006 7:52 19

Navigation49
been entered, the closest street that crosses it is requested ( Junction on the
screen) in order to establish the current position accurately.
If possible, the equipment may determine the current position using the
option Confirm position .
RNS MP3_ingles Seite 49 Mittwoch, 10. Mai 2006 7:52 19

Navigation
50Destination guideBegin/cancel destination guide
Pressing , the destination guide begins; with it is cancelled. The destination guide can only begin if a ( ⇒page 45) a destination
( ⇒ page 37) or itinerary (⇒ page 40) has been first selected.
– Press the button to return to the Navigation main menu. The
current destination or itinerary is displayed on the screen
⇒ fig. 25 .
– Press to begin the destination guide or indi-
cated itinerary. An audio announcement indicates that the route
or route via intermediate destinations is being calculated. The
radio and navigation system changes to the symbol display
mode ⇒page 53, fig. 26 . – Press if you wish to stop the destination guide func-
tion before you have reached your destination. The equipment
changes to the symbol display mode ⇒page 50. The current
vehicle position is indicated. Pressing the desti-
nation guide resumes from this position.
Notes on the itinerary destination guide
If the title Route planning appears on the screen, various destinations are
passed during the final destination guide. Press to pass
through all of the destinations saved on the itinerary. To change the itinerary
⇒ page 40, “Route planning”.
BEG. DES. GUIDE
END GUIDE
Fig. 25 Starting destination guide
NAV
BEGIN DES. GUIDE
END GUIDE
BEG. DES.GUIDEBEGIN DES.GUIDE
RNS MP3_ingles Seite 50 Mittwoch, 10. Mai 2006 7:52 19

Navigation51
Specific destinations may also sele cted from an itinerary by pushing Start
route ; intermediate destinations are omitted.
When reaching an intermediate destination, an audio indication is given. The
route calculation to the following destination begins automatically.
When the intermediate destination is reached, it is possible to interrupt the
destination guide by pressing ; it may be resumed from the same
position by pressing the button.
Dynamic destination guide with TMC (Traffic Message Channel)
⇒ page 51
Starting the demonstration
To begin the demonstrat ion destination guide ⇒page 48, “Demonstration
mode”.
Note
•
If you hear a message indicating that you are driving on an unrecognized
road, you should continue to drive. Th e unit might have to orientate itself
using the next main road.
•
With the destination guide activated, stages may be added or established
destinations altered ( ⇒page 37, “Preparing the destination guide”). If a
destination is added, the equipment wi ll prepare an itinerary automatically
( ⇒ page 40, “Route planning”), even if the Route with stages function is
deactivated in route options ( ⇒page 42, “Route options”).
Dynamic destination guide with TMC (Traffic Message Channel)
During the dynamic destination guide, traffic reports emitted
by TMC stations are taken into account for route calculation.
In this way, problematic stretches are avoided.To activate or deactivate this fu nction, press the button ; this will
access the route options pressing ; the dynamic guide status
is selected using the option Dynamic Navigation.
It is also possible to press on the main navigation menu and activate
or deactivate the dynamic guide in the Route options ⇒ page 42, fig. 21 .
Once the dynamic destination guide function has been activated you will be
informed that the route is being recalcul ated due to traffic problems if any
have been registered.
Dynamic destination guide preconditions
In order to use the dynamic destination guide, a TMC station must always be
available ( TMC indicator on the lower right hand side of the screen). If the
station received does not offer the TMC service, it is possible to search for a
TMC station after beginning the destination guide. A selection may be made
from the TMC stations framework ⇒ page 12. Once a TMC station has been
found or selected, the destination guide is started.
While the destination guide is operating, other sound sources may be used
(for example an audio CD), even though the TMC reception will remain active
while the reception is good (Note ⇒page 56, “The destination guide without
the navigation CD”). If you continue li stening to the radio, the tuned radio
station should offer the TMC service.
If the signal from the TMC station is lost, the radio and navigation system
searches for another similar type station.
If, however, “ maintain without TMC ” has been selected or no TMC station is
being received, the message “ No TMC station registered.” is displayed. It is
END GUIDE
BEGIN GUIDE
TRAFFIC
ROUTE OPTIONS
ROUTE
RNS MP3_ingles Seite 51 Mittwoch, 10. Mai 2006 7:52 19

Navigation
52possible that no new traffic reports will be received. In this case, the dynamic
destination guide is limited or may not work.
Traffic problems during dynamic destination guide
If, while the destination guide is working, a traffic problem arises on the
route, an audio message will indicate the traffic problems or, just before the
problem, will indicate that there are traffic problems.
The navigation system will calculate the quickest possible route when the
dynamic destination guide option is active. The system might well guide you
through a traffic jam if the diversion would be longer.
To display the received traffic reports
Pressing the button displays a list of the latest traffic reports from
the received TMC station.
Rotating and pressing the menu button, additional information on the traffic
report is displayed. Thus, information may be obtained on route traffic and
the route may be altered before beginning the destination guide.
Note
•
The dynamic route guide option will only function if you are receiving at
least one TMC radio station. During the destination guide, the TMC station
must be listened to.
•
The quality of the dynamic destination guide depends on the information
contained in the traffic announcements. The stations and / or traffic informa-
tion providers are responsible for th e quality of the information given.
•
In some situations, the proposed deviat ion in function of some TMC traffic
report may possibly not represent any time saving if the alternative route is
also saturated.
TRAFFIC
RNS MP3_ingles Seite 52 Mittwoch, 10. Mai 2006 7:52 19

Navigation53
Navigation instructions
Navigation recommendations are made as audio and visual indications (represented using symbols).After the destination guide is begun, the equipment will auto mati-
cally display visual indications (symbol representation).
Fig. 26 Visual indication (symbol representation)Fig. 27 Destination guide on the main navigation menu
RNS MP3_ingles Seite 53 Mittwoch, 10. Mai 2006 7:52 19