2008 RENAULT SCENIC steering

MULTIMEDIA
Fault finding - List and location of components86C
86C - 7V5 MR-372-J84-86C050$104.mif
ITS
Program no.: 0020
Vdiag No.: 04MULTIMEDIA
Fault finding - List and location of components
1 - List and location of components
* Satellite guidanceNumber Description
1Navigation computer
2CD multi-changer
3GPS aerial*
4Display
6Steering column control
7Speakers
8Tweeter speakers
9Navigation central control
10Tuner-amplifier
11Microphone
ITSJ84ph2V1.0
MR-372-J84-86C050$104.mif

MULTIMEDIA
Fault finding - Operating diagram
86C
86C - 8V5 MR-372-J84-86C050$156.mif
ITS
Program no.: 0020
Vdiag No.: 04MULTIMEDIA
Fault finding - Operating diagram
2 - Operating diagram
MicrophoneGPS aerial*
(+ telephone)
Display Navigation computer
Speakers
Receiver/radio Navigation central control Diagnostic socket
CD multi-changer Steering column control
AM/FM aerial amplifier
- Vehicle multiplex network
- Multimedia multiplex network
- Bus UART
- Wire connectionsVehicle multiplex
network
* Satellite guidance
ITSJ84ph2V1.0
MR-372-J84-86C050$156.mif

MULTIMEDIA
Fault finding - Role of components
86C
86C - 10V5 MR-372-J84-86C050$260.mif
ITS
Program no.: 0020
Vdiag No.: 04MULTIMEDIA
Fault finding - Role of components
4 - Role of main components
●Receiver: the receiver transmits audio signals via the speakers inside the vehicle.
●Display: displays different multimedia information such as the station tuned in, the time, or information related to
CDs or satellite navigation.
●Steering column switch: different multimedia functions can be accessed via controls on the steering wheel.
●Speakers and tweeter speakers: produce sound from the multimedia system inside the vehicle.
●CD multi-changer: loads CDs and sends audio signals to the receiver.
●AM/FM aerial: picks up waves from various transmitters.
●GPS aerial: receives various signals emitted by satellites.
●Navigation central control: different multimedia functions can be intuitively accessed via a multimedia keypad.
●Microphone: enables a phone to be used in hands-free mode via a Bluetooth connection.
●Navigation computer: manages the various multimedia system functions according to the requests of the user.
●DVD cartographic map: loads maps onto the navigation computer.
●AM/FM aerial amplifier: improves the reception of AM/FM signals.
ITSJ84ph2V1.0
MR-372-J84-86C050$260.mif

MULTIMEDIA
Fault finding - Conformity check
86C
86C - 25V5 MR-372-J84-86C050$520.mif
ITS
Program no.: 0020
Vdiag No.: 04
Sub-function: DRIVER SELECTION
NOTESOnly carry out this conformity check after a complete check with the diagnostic tool
(fault reading and configuration checks).
Application conditions: Engine stopped, + after ignition feed switched on.
Order FunctionParameter or Status
Check or Action Display and Notes Fault finding
1Steering
column switchET006:+ buttonDEPRESSED
RELEASED
In the event of a fault,
consult the interpretation of
statuses ET006 + button,
ET007 - button, ET010 low
button, ET009 high button
and ET034 MODE button. ET007:- buttonDEPRESSED
RELEASED
ET010:Lower buttonDEPRESSED
RELEASED
ET009:Upper buttonDEPRESSED
RELEASED
ET034:MODE buttonDEPRESSED
RELEASED
2Communication
connection
buttonET017:Communication
connection
buttonDEPRESSED
RELEASEDIn the event of a fault, consult
the interpretation of status
ET017 Communication
button.
3Steering
column controlET018:Wheel actionINACTIVE
UPWARDS
DOWNWARDSIn the event of a fault, consult
the interpretation of status
ET018 Wheel activation.
Note:
If you need to work on the telephone, ensure that you have the PIN code.
ITSJ84ph2V1.0

MULTIMEDIA
Fault finding - Interpretation of statuses
86C
86C - 29V5 MR-372-J84-86C050$624.mif
ITS
Program no.: 0020
Vdiag No.: 04MULTIMEDIA
Fault finding - Interpretation of statuses
ET003
+ 12 V SIDE LIGHTS FEED
NOTESVisually check that the side lights are working. Carry out fault finding on the steering
column switches and the side lights.
Use the Wiring Diagrams Technical Note, Scenic II.
Check the condition of the 7.5 A fuse in the engine compartment connection unit (component code 1337).
Check the condition and connection of the navigation central control connectors (component code 1657) and of
the CD changer (component code 1272) (broken, bent tabs).
If the connectors are faulty and if there is a repair method (see Technical Note 6015A, Repairing electrical
wiring, Wiring: Precautions for repair), repair the connectors; otherwise, replace the wiring.
Check the insulation, continuity and the absence of interference resistance on the LPG connection between
components 1337, 1272 and 1657.
If the connection is faulty and if there is a repair method (see Technical Note 6015A, Repairing electrical wiring,
Wiring: Precautions for repair), repair the wiring; otherwise, replace the wiring.
If the fault is still present, contact the Techline.
AFTER REPAIRRepeat the conformity check from the start.
ITS_V04_ET003ITSJ84ph2V1.0
MR-372-J84-86C050$624.mif

MULTIMEDIA
Fault finding - Interpretation of statuses
86C
86C - 30V5 MR-372-J84-86C050$624.mif
ITS
Program no.: 0020
Vdiag No.: 04
ET006
ET007
ET009
ET010
ET034+ BUTTON
- BUTTON
UPPER BUTTON
LOWER BUTTON
MODE BUTTON
NOTESThere must be no present or stored faults.
Use the Wiring Diagrams Technical Note, Scenic II.
Check the condition and connection of the steering column switch 10-track connector (component code 1519) and
of the receiver 32-track connector (component code 261) (broken, oxidised, bent tabs).
If the connectors are faulty and if there is a repair method (see Technical Note 6015A, Repairing electrical
wiring, Wiring: Precautions for repair), repair the connectors; otherwise, replace the wiring.
Check the insulation, continuity and the absence of interference resistance on the following connections:
●connection code 34AQ,
●connection code 34AU,
●connection code 34AS,
●connection code 34AR,
●connection code 34AP,
●connection code 34AT,
●connection code 34AO,
between components 261 and 1519.
If any connection is faulty and if there is a repair method (see Technical Note 6015A, Repairing electrical wiring,
Wiring: Precautions for repair), repair the wiring; otherwise, replace the wiring.
AFTER REPAIRRepeat the conformity check from the start.
ITS_V04_ET006/ ITS_V04_ET007/ITS_V04_ET009/ITS_V04_ET010/ITS_V04_ET034 ITSJ84ph2V1.0

MULTIMEDIA
Fault finding - Interpretation of statuses
86C
86C - 32V5 MR-372-J84-86C050$624.mif
ITS
Program no.: 0020
Vdiag No.: 04
ET017
COMMUNICATION CONNECTION BUTTON
NOTESThere must be no present or stored faults.
Use the Wiring Diagrams Technical Note, Scenic II.
Check the condition and connection of the steering column switch 10-track connector (component code 1519) and
of the receiver 32-track connector (component code 261) (broken, oxidised, bent tabs).
If the connectors are faulty and if there is a repair method (see Technical Note 6015A, Repairing electrical
wiring, Wiring: Precautions for repair), repair the connectors; otherwise, replace the wiring.
Check the insulation, continuity and the absence of interference resistance on the following connections:
●connection code 34AT,
●connection code 34AO,
between components 261 and 1519.
If any connection is faulty and if there is a repair method (see Technical Note 6015A, Repairing electrical wiring,
Wiring: Precautions for repair), repair the wiring; otherwise, replace the wiring.
Carry out the following checks on component 1519 using an ohmmeter:
●Communication button pressed: the resistance should be less than 150 Ω between connections 34AT and
34AO.
●Communication button released: there should be insulation between connections 34AT and 34AO.
If the measurements taken do not correspond to the values above, replace component 1519 (see MR 370
Mechanical 84A, Control - signals, Wiper switch: Removal - Refitting).
If the fault is still present, contact the Techline.
AFTER REPAIRRepeat the conformity check from the start.
ITS_V04_ET017ITSJ84ph2V1.0

MULTIMEDIA
Fault finding - Interpretation of statuses
86C
86C - 33V5 MR-372-J84-86C050$624.mif
ITS
Program no.: 0020
Vdiag No.: 04
ET018
TUMBLEWHEEL ACTION
NOTESThere must be no present or stored faults.
Use the Wiring Diagrams Technical Note, Scenic II.
Check the condition and connection of the steering column switch 10-track connector (component code 1519) and
of the receiver 32-track connector (component code 261) (broken, oxidised, bent tabs).
If the connectors are faulty and if there is a repair method (see Technical Note 6015A, Repairing electrical
wiring, Wiring: Precautions for repair), repair the connectors; otherwise, replace the wiring.
Check the insulation, continuity and the absence of interference resistance on the following connections:
●connection code 34AU,
●connection code 34AS,
●connection code 34AT,
●connection code 34AR,
between components 1519 and 261.
If any connection is faulty and if there is a repair method (see Technical Note 6015A, Repairing electrical wiring,
Wiring: Precautions for repair), repair the wiring; otherwise, replace the wiring.
Check the continuity of component 1519:
–between connections 34AR and 34AT,
–between connections 34AR and 34AS,
–between connections 34AR and 34AU.
Wheel checking procedure (see MR 370 Mechanical 84A, Control - signals, Radio control satellite: Test).
If there is no continuity, replace component 1519 (see MR 370 Mechanical 84A, Control - signals, Wiper switch:
Removal - Refitting).
If the fault is still present, contact the Techline.
AFTER REPAIRRepeat the conformity check from the start.
ITS_V04_ET018ITSJ84ph2V1.0