2008 Peugeot 407 C display
[x] Cancel search: displayPage 30 of 211
1
31
TRIP COMPUTER
or
TRIP (Route): access
to the trip computer dis-
plays.
Zero reset
When the required route is displayed,
press the control for more than two
seconds. - the route
"1" tab with:
Page 31 of 211
1
32
Press the "MENU" button to gain ac-
cess to the general menu.
Select the "Trip computer" or
"Vehicle diagnostics" application us-
i n g t h e n a v i g a t o r , t h e n c o n fi r m o r p r e s s
the "MODE" button until you reach the
t r i p c o m p u t e r s c r e e n , t h e n c o n fi r m u s -
ing "OK" .
The "Trip computer" or "Vehicle diag-
nostics" menu offers various options:
- Warnings log,
- Status of the functions,
- Inputting of the distance to be trav- elled.
Warnings log
This summarises the active warning
messages, displaying them on the
multifunction display in succession.
Status of the functions
This summarises the active or inactive
status of the functions present on the
vehicle.
Distance remaining
When guidance is not activated, this
enables you to enter an approximate
distance to be travelled value.
Display on the instrument panel screen
All of the various items of trip computer
information also appear on the instru-
ment panel screen at the same time.
Distance remaining to be travelled (km or miles)
Average speed (km/h or mph)
Average consumption (l/100 or km/l or mpg)
Distance travelled (km or miles)
This is the average speed calculated
since the computer was last set to
zero (with the ignition on).
This is the distance remaining to the
destination, either calculated at any
time by the navigation if guidance is
activated or entered by the user, mi-
nus the distance covered since the
distance was entered.
If digits are missing, dashes are dis-
played in their place.
This is the average fuel consumption
since the computer was last set to zero.
This indicates the distance travelled
since the computer was last set to zero.
Access via the general menu
"TRIP" (Route) menu
Page 32 of 211
2
33
COLOUR SCREEN C
This displays the following informa-
tion, via the WIP Sound audio system
control pad:
- the time,
- the date,
- the exterior temperature (the value d i s p l a y e d fl a s h e s i f t h e r e i s a r i s k
of ice),
- t h e a c c e s s e s c h e c k ,
- the warning messages,
- the audio functions,
- the trip computer information,
-
t h e p e r s o n a l i s a t i o n a n d c o n fi g u r a t i o n
displays,
- the air conditioning parameters,
-
t h e f r o n t a n d r e a r p a r k i n g a s s i s t a n c e
display,
- t h e h a n d s - f r e e k i t d i s p l a y s . Management of the displays
General menu
Press the
"MENU" button to gain ac-
cess to the general menu and select
one of the following functions:
- "Audio functions",
- "Trip computer",
- " P e r s o n a l i s a t i o n - C o n fi g u r a t i o n " ,
- "Air conditioning",
- " T e l e p h o n e " . " P e r s o n a l i s a t i o n - C o n fi g u r a t i o n "
menu
This provides access to successive
c o n fi r m a t i o n w i n d o w s .
D e fi n i n g t h e v e h i c l e p a r a m e t e r s
This enables you to activate or de-
activate certain driving and comfort
elements:
-
"Automatic switching on of the lights", - "Follow-me-home lighting" and
"Duration",
- "Remote control action",
- " P e r m a n e n t l o c k i n g o f t h e b o o t " ,
- " D i r e c t i o n a l h e a d l a m p s " .
Example: "Automatic switching on of
the lights"
The
"AUDIO" , "TRIP" , "CLIM" and
"TEL" buttons on the RD4 audio
equipment control pad permit display-
i n g i n t h e m a i n w i n d o w .
Example: "TRIP"
Example: "Audio functions"
Page 33 of 211
2
34
S e l e c t i o n o f t h e l a n g u a g e
German, Spanish, French, English,
I t a l i a n , D u t c h , T u r k i s h , P o r t u g u e s e
a n d B r a z i l i a n P o r t u g u e s e .
C o n fi g u r a t i o n o f t h e d i s p l a y
- " S e t t i n g t h e b r i g h t n e s s - v i d e o " .
- " S e t t i n g t h e d a t e a n d t i m e " .
- " S e l e c t i o n o f t h e u n i t s " .
- " S e l e c t i o n o f t h e c o l o u r s " . Changing the date and time
From the
general menu , select the
" P e r s o n a l i s a t i o n - C o n f i g u r a t i o n "
i c o n u s i n g t h e n a v i g a t o r , t h e n c o n fi r m .
From the list displayed, select
" C o n fi g u r a t i o n o f t h e d i s p l a y " , then
c o n fi r m .
From the list displayed, select "Setting
the date and time" , t h e n c o n fi r m . Set the parameters one by one:
- the zone selected is displayed on
the screen,
- use the navigator to move from one zone to another,
- your new parameters are con- fi r m e d o n e b y o n e , b y p r e s s i n g t h e
navigator button,
- all of the changes are saved, if you c l i c k o n "OK" on the screen, or
cancelled, if you press the "ESC"
b u t t o n o n t h e c o n t r o l p a d .
F o r s a f e t y r e a s o n s , c o n fi g u r a -
tion of the multifunction dis-
plays by the driver must be
c a r r i e d o u t w h i l e s t a t i o n a r y .
Page 34 of 211
2
35
16/9 COLOUR SCREEN DT
This displays the following information,
via the WIP Com audio and telematics
system control panel:
- the time,
- the date,
- the outside temperature (the value d i s p l a y e d fl a s h e s i f t h e r e i s a r i s k
of ice),
- the status of the accesses,
- the warning messages or vehicle function status messages,
displayed temporarily,
- the audio functions,
- the telematic systems display ( t e l e p h o n e , s e r v i c e s , . . . ) ,
- the trip computer information,
- the personalisation and c o n fi g u r a t i o n d i s p l a y s ,
- the air conditioning parameters,
- t h e f r o n t a n d r e a r p a r k i n g assistance display,
- the satellite navigation system i n f o r m a t i o n . General menu
Press the
"MENU" button to access
the general menu and select one of
the following functions:
- "Navigation - guidance",
- "Map",
- " T r a f fi c i n f o r m a t i o n " ,
- "Audio functions",
- "Telematics",
- " C o n fi g u r a t i o n " ,
- "Video",
- "Vehicle diagnostics",
- " A i r c o n d i t i o n i n g " . " C o n fi g u r a t i o n " m e n u
This provides access to the following
functions:
- " D i s p l a y c o n fi g u r a t i o n " ,
- "Sound",
- "Select language",
- " D e fi n e t h e v e h i c l e p a r a m e t e r s " .
Page 43 of 211
3
44
PROGRAMMABLE HEATING Programming remote control
T h e h e a t i n g s y s t e m p r o g r a m m i n g r e -
mote control consists of the following
b u t t o n s a n d d i s p l a y s :
1. Scrolling functions menu buttons.
2. Function indicator lights: clock,
t e m p e r a t u r e , o p e r a t i n g t i m e , p r o -
g r a m m e d t i m e , h e a t e r o p e r a t i o n ,
h e a t i n g m a n a g e m e n t s y m b o l s .
3. D i g i t a l d i s p l a y s : t i m e , t e m p e r a t u r e ,
d u r a t i o n o f o p e r a t i o n , p r o g r a m m e d
time or level of heating.
4. Off button.
5. On button.
Displaying the functions
If a malfunction of the programma-
ble heating system occurs, contact
a PEUGEOT dealer.
T h e p r o g r a m m a b l e h e a t i n g o p e r a t e s
i n d e p e n d e n t l y o f t h e e n g i n e .
W h e n t h e e n g i n e i s o f f , i t p r e - h e a t s
t h e c o o l a n t c i r c u i t i n o r d e r t o b e n e fi t
f r o m a n o p t i m u m e n g i n e o p e r a t i n g
t e m p e r a t u r e f r o m t h e t i m e t h e e n g i n e
is switched on.
T h e p r o g r a m m a b l e h e a t i n g s y s t e m
is switched on using the long range
r e m o t e c o n t r o l . A c t i v a t i o n c a n b e i m -
m e d i a t e o r d e f e r r e d b y m e a n s o f a
p r o g r a m m i n g f u n c t i o n .
screen
Press the buttons
1 in succession to
d i s p l a y t h e f u n c t i o n s .
T h e fi r s t p r e s s o f t h e l e f t - h a n d o r r i g h t -
h a n d b u t t o n d i s p l a y s t h e t i m e .
N e x t , t h e l e f t - h a n d b u t t o n p e r m i t s a c -
c e s s t o t h e p r o g r a m m i n g t i m e t h e n t o
t h e l e v e l o f h e a t i n g ( C 1 t o C 5 ) .
T h e r i g h t - h a n d b u t t o n p e r m i t s a c c e s s
t o t h e p a s s e n g e r c o m p a r t m e n t t e m -
p e r a t u r e t h e n t o t h e d u r a t i o n o f o p e r a -
tion of the heater if it is to be switched
o n i m m e d i a t e l y .
T h e p a s s e n g e r c o m p a r t m e n t
t e m p e r a t u r e i n f o r m a t i o n i s o n l y
available when the engine is off.
Page 68 of 211
4
When the windows are closed
automatically using the remote
control, ensure that no one is
preventing them from closing
correctly.
The folding and unfolding of the ex-
terior mirrors can be deactivated by a
PEUGEOT dealer.
The complete or selective
u n l o c k i n g c a n b e c o n fi g -
ured by means of a param-
eter, via the multifunction
display "Personalisation-
C o n fi g u r a t i o n " menu.
boot
Press button D to unlock and open
the boot.
This action also unlocks the doors.
If the permanent locking of the boot is
activated, opening is only possible via
button D on the remote control.
When the vehicle is locked,
if unlocking is activated inad-
vertently, without a door being
opened within 30 seconds, the
vehicle will lock automatically.
T h i s f u n c t i o n c a n b e c o n fi g -
ured by means of a param-
eter, via the multifunction
display "Personalisation -
C o n fi g u r a t i o n " menu.
Key in ignition
A buzzer sounds on opening the driv-
er’s door, if the key has been left in the
ignition.
LOCATING YOUR VEHICLE
To locate your vehicle, if you have
locked or deadlocked it, in a car park:
press button B on the remote con-
trol, the courtesy lights come on
a n d t h e d i r e c t i o n i n d i c a t o r s fl a s h
for a few seconds.
Unlocking
Selective (if activated)
Press button C to unlock the driv-
er's door only.
P r e s s t h e b u t t o n a g a i n to unlock
the passenger door and the boot.
E a c h a c t i o n i s c o n fi r m e d b y r a p i d
fl a s h i n g o f t h e d i r e c t i o n i n d i c a t o r s f o r
approximately two seconds.
The exterior mirrors unfold at the same
time.
Complete
Press button C for complete un-
locking of the vehicle.
T h i s i s c o n fi r m e d b y r a p i d fl a s h i n g o f
the direction indicators for approxi-
mately two seconds.
The exterior mirrors unfold at the same
time.
Page 69 of 211
4
66
CHANGING THE REMOTE CONTROL BATTERY
Battery ref.: CR1620/3 volts.
To change the battery, unclip the cas-
ing using a coin at the notch.
REPROGRAMMING THE REMOTE CONTROL
Switch off the ignition.
Switch the ignition on again.
Press the remote control locking but-
ton immediately for a few seconds.
Switch off the ignition and remove
the remote control key from the ig-
nition lock. The remote control is
now working again.
ELECTRONIC ENGINE IMMOBILISER
This locks the engine control system
a few moments after the ignition has
been switched off and therefore pre-
vents starting of the vehicle by anyone
who does not have the key.
The ignition key has an electronic chip
which has a special code. When the
ignition is switched on, the code is rec-
ognised and starting is possible.
Do not discard the batteries,
they contain metals which are
harmful to the environment.
Take them to an approved col-
lection point.
If the system does not
f u n c t i o n c o r r e c t l y , the
warning light comes on on
the instrument panel display,
accompanied by an audible
signal and a message on the
multifunction display.
In this case, your vehicle will not start.
Contact a PEUGEOT dealer as soon
as possible.
If the remote control does not work af-
ter the battery has been changed, re-
programme the remote control.