2008 Peugeot 407 C Dag engine
[x] Cancel search: enginePage 24 of 211
1
27
Coolant temperature indicator
When the needle is in zone A , the
temperature is correct.
When the needle is in zone B , the
temperature is too high.
If the coolant temperature
warning light comes on (linked
with the STOP warning light),
stop immediately.
Wait for the engine to cool
down before topping up the level, if
necessary.
As the cooling circuit is pres-
surised, in order to prevent
any risk of scalding, unscrew
the cap by two turns to allow
the pressure to drop.
When the pressure has dropped, remove
the cap and top up the level with coolant,
if necessary.
Consult a PEUGEOT dealer.
This indicates an automatic
gearbox programme fault.
Automatic gearbox lever position indicator lights
Automatic gearbox fault
warning light
This indicates an automatic
gearbox fault.
The gearbox will operate in down-grade
mode, locked in 3rd gear.
Never force the selector lever.
Consult a PEUGEOT dealer.
6 speed automatic gearbox
"Park" indicator
lights
"Reverse" indicator
lights
"Neutral" indicator
lights
"Drive" indicator
lights
The letter S or the symbol
, associa-
ted with the gate lever position indicator
lights, corresponds to the Sport or Snow
programme selected intentionally. "Manual" indicator lights
These correspond to the manual control
of the gearbox.
When the engine speed is too low or too
high in relation to the gear engaged, the
g e a r s e l e c t e d fl a s h e s f o r a f e w s e c o n d s ,
then the actual gear is displayed, the
auto-adaptive programme having taken
control temporarily.
Page 25 of 211
1
28
SERVICE INDICATOR
This is a visual reminder of when the next
service is due. This service is to be car-
ried out according to the manufacturer's
servicing schedule.
Once an engine oil level indication has
been displayed, the display indicates
the total and trip distances.
If the service is overdue, each time the
ignition is switched on and for 5 seconds,
t h e d i s t a n c e a n d t h e s p a n n e r fl a s h .
Example: when the ignition is switched
on and for 5 seconds, the display in-
dicates that the service is overdue by
300 miles/km. The service should be
carried out very shortly.
Once the servicing and oil level informa-
tion has been displayed, the total distance
recorder resumes normal operation and
the spanner remains lit.
The point at which a service is due is
calculated using two parameters:
- the total distance travelled,
- the time elapsed since the last ser- vice.
The distance remaining may be weight-
ed by the time factor, depending on the
user's driving habits.
Engine oil temperature indicator
When the ignition is switched on or while
the vehicle is moving, this indicates the
engine oil temperature.
When the needle is in zone C , the
temperature is correct.
When the needle is in zone D , the
temperature is too high.
Reduce your speed to lower the tem-
perature. Operation
As soon as the ignition is switched on
and for 5 seconds, the spanner sym-
bolising the service operations is lit.
The trip recorder display shows the
d i s t a n c e r e m a i n i n g ( i n r o u n d fi g u r e s )
before the next service.
Example: when switching on the igni-
tion and for 5 seconds, the display
shows that 900 miles/km remain before
the next service is due.
Page 26 of 211
1
28
SERVICE INDICATOR
This is a visual reminder of when the next
service is due. This service is to be car-
ried out according to the manufacturer's
servicing schedule.
Once an engine oil level indication has
been displayed, the display indicates
the total and trip distances.
If the service is overdue, each time the
ignition is switched on and for 5 seconds,
t h e d i s t a n c e a n d t h e s p a n n e r fl a s h .
Example: when the ignition is switched
on and for 5 seconds, the display in-
dicates that the service is overdue by
300 miles/km. The service should be
carried out very shortly.
Once the servicing and oil level informa-
tion has been displayed, the total distance
recorder resumes normal operation and
the spanner remains lit.
The point at which a service is due is
calculated using two parameters:
- the total distance travelled,
- the time elapsed since the last ser- vice.
The distance remaining may be weight-
ed by the time factor, depending on the
user's driving habits.
Engine oil temperature indicator
When the ignition is switched on or while
the vehicle is moving, this indicates the
engine oil temperature.
When the needle is in zone C , the
temperature is correct.
When the needle is in zone D , the
temperature is too high.
Reduce your speed to lower the tem-
perature. Operation
As soon as the ignition is switched on
and for 5 seconds, the spanner sym-
bolising the service operations is lit.
The trip recorder display shows the
d i s t a n c e r e m a i n i n g ( i n r o u n d fi g u r e s )
before the next service.
Example: when switching on the igni-
tion and for 5 seconds, the display
shows that 900 miles/km remain before
the next service is due.
Page 27 of 211
1
Service indicator zero re-set
Your PEUGEOT dealer carries out this
operation after each service.
However, if you carry out the service your-
self, the re-set procedure is as follows:
Switch off the ignition,
Press and hold the trip recorder re-set
button,
Switch on the ignition.
The display begins a countdown.
When the display shows "=0" , release
the button; the spanner disappears.
Engine oil level indicator
When the ignition is switched on, the
engine oil level is indicated for approxi-
mately 5 seconds, after the service
information.
Dipstick
There are 2 level marks on
the dipstick: never exceed
level A .
In position B , top up the
level via the oil reservoir
cap, using the type of oil
suited to your engine.
A = max.
B = min.
Oil level correct
Lack of oil
Flashing indicates a lack of oil which
may damage the engine.
I f t h e l a c k o f o i l i s c o n fi r m e d b y c h e c k i n g
using the dipstick, it is imperative that
the level is topped up. Oil level gauge fault
( fl a s h i n g s e g m e n t s )
Check the oil level using the dipstick.
I f t h e l e v e l i s c o r r e c t , t h e fl a s h i n g
indicates an engine oil level gauge
malfunction.
Consult a PEUGEOT dealer.
The level observed on the dipstick is
only valid if the vehicle is parked on
level ground and the engine has been
off for more than 15 minutes.
After this operation, if you wish
to disconnect the battery, lock
the vehicle and wait for at least
fi v e m i n u t e s , o t h e r w i s e t h e
zero re-set will not be regis-
tered.
Page 28 of 211
1
Service indicator zero re-set
Your PEUGEOT dealer carries out this
operation after each service.
However, if you carry out the service your-
self, the re-set procedure is as follows:
Switch off the ignition,
Press and hold the trip recorder re-set
button,
Switch on the ignition.
The display begins a countdown.
When the display shows "=0" , release
the button; the spanner disappears.
Engine oil level indicator
When the ignition is switched on, the
engine oil level is indicated for approxi-
mately 5 seconds, after the service
information.
Dipstick
There are 2 level marks on
the dipstick: never exceed
level A .
In position B , top up the
level via the oil reservoir
cap, using the type of oil
suited to your engine.
A = max.
B = min.
Oil level correct
Lack of oil
Flashing indicates a lack of oil which
may damage the engine.
I f t h e l a c k o f o i l i s c o n fi r m e d b y c h e c k i n g
using the dipstick, it is imperative that
the level is topped up. Oil level gauge fault
( fl a s h i n g s e g m e n t s )
Check the oil level using the dipstick.
I f t h e l e v e l i s c o r r e c t , t h e fl a s h i n g
indicates an engine oil level gauge
malfunction.
Consult a PEUGEOT dealer.
The level observed on the dipstick is
only valid if the vehicle is parked on
level ground and the engine has been
off for more than 15 minutes.
After this operation, if you wish
to disconnect the battery, lock
the vehicle and wait for at least
fi v e m i n u t e s , o t h e r w i s e t h e
zero re-set will not be regis-
tered.
Page 39 of 211
3
40
AUTOMATIC AIR CONDITIONING (DUAL ZONE)
Dual zone: this is the differentiated
r e g u l a t i o n o f t h e t e m p e r a t u r e a n d a i r
distribution on the driver's side and the
f r o n t p a s s e n g e r s i d e .
T h e d r i v e r a n d h i s f r o n t p a s s e n g e r c a n
e a c h a d j u s t t h e t e m p e r a t u r e a n d t h e
d i s t r i b u t i o n o f t h e a i r t o s u i t t h e i r r e q u i r e -
m e n t s .
T h e s y m b o l s a n d m e s s a g e s a s s o c i a t -
ed with the automatic air conditioning
c o n t r o l s a p p e a r o n t h e m u l t i f u n c t i o n
d i s p l a y .
Control by the Auto programme Automatic
programme - driver
and passenger
comfort (1)
Press the "AUTO" b u t t o n . T h e i n d i c a -
t o r l i g h t c o m e s o n . T h e "AUTO" s y m -
b o l i s d i s p l a y e d o n t h e m u l t i f u n c t i o n
d i s p l a y .
Adjustment of the temperature
on the driver's side (2)
Adjustment of the temperature
on the passenger side (3)
P r e s s t h e u p o r d o w n a r r o w t o
c h a n g e t h e t e m p e r a t u r e o n t h e
driver's side 2 o r p a s s e n g e r s i d e 3 .
T h e v a l u e i n d i c a t e d o n t h e d i s p l a y c o r -
r e s p o n d s t o a l e v e l o f c o m f o r t a n d n o t
t o a t e m p e r a t u r e i n d e g r e e s C e l s i u s o r
F a h r e n h e i t , d e p e n d i n g o n t h e c h o i c e o f
c o n fi g u r a t i o n v a l i d a t e d o n t h e d i s p l a y .
A setting around the value 21 makes
i t p o s s i b l e t o o b t a i n o p t i m u m c o m f o r t .
H o w e v e r , d e p e n d i n g o n y o u r r e q u i r e -
ments, a setting between 18 and 24
i s u s u a l .
D e p e n d i n g o n t h e l e v e l o f c o m f o r t s e -
l e c t e d , t h e s y s t e m c o n t r o l s t h e a i r d i s -
t r i b u t i o n , fl o w , t e m p e r a t u r e a n d i n t a k e
of air in order to guarantee comfort
and an adequate circulation of air in
t h e p a s s e n g e r c o m p a r t m e n t . Y o u d o
n o t h a v e t o m a k e a n y a d j u s t m e n t s .
When the engine is cold, to
p r e v e n t t o o g r e a t a d i s t r i b u t i o n
of cold air, the ventilation will
o n l y r e a c h i t s o p t i m u m l e v e l
p r o g r e s s i v e l y .
Page 41 of 211
3
42
Front visibility
control (7)
I n c e r t a i n c a s e s , t h e c o m f o r t p r o -
g r a m m e m a y n o t b e s u f fi c i e n t t o d e m -
i s t o r d e - i c e t h e w i n d o w s ( h u m i d i t y ,
s e v e r a l p a s s e n g e r s , i c e ) .
I n t h i s c a s e , s e l e c t t h e f r o n t v i s -
i b i l i t y p r o g r a m m e i n o r d e r t o c l e a r
t h e w i n d o w s q u i c k l y . T h e i n d i c a t o r
l i g h t c o m e s o n .
I t c o n t r o l s t h e a i r c o n d i t i o n i n g , a i r fl o w
a n d i n t a k e a n d d i s t r i b u t e s t h e v e n t i l a -
tion to the windscreen and front side
w i n d o w s .
T h e f r o n t v i s i b i l i t y c o n t r o l s y m b o l i s
d i s p l a y e d o n t h e m u l t i f u n c t i o n d i s p l a y .
Once the inconvenience has been
e l i m i n a t e d , p r e s s i n g b u t t o n 1 returns
t h e s y s t e m t o t h e c o m f o r t s e t t i n g . Intake of exterior
air/Recirculation of
interior air (8)
T h i s f u n c t i o n e n a b l e s y o u t o i s o l a t e
t h e p a s s e n g e r c o m p a r t m e n t f r o m e x -
t e r i o r f u m e s a n d o d o u r s .
Press button 8 several times to
s e t t h e a i r i n t a k e m o d e , t h e i n d i c a -
t o r l i g h t w h i c h c o r r e s p o n d s t o t h e
m o d e s e t c o m e s o n a t y o u r p r e f e r -
ence:
- i n t a k e o f e x t e r i o r a i r . F o r c e d e x - t e r i o r a i r i n t a k e m o d e .
- r e c i r c u l a t i o n o f t h e a i r i n s i d e t h e p a s s e n g e r c o m p a r t m e n t .
T h e i n d i c a t o r l i g h t w h i c h c o r r e - s p o n d s t o t h e m o d e s e t c o m e s
o n . P r o l o n g e d o p e r a t i o n i n i n t e -
r i o r a i r r e c i r c u l a t i o n m o d e m a y
r e s u l t i n t h e f o r m a t i o n o f c o n -
densation and deterioration of
t h e q u a l i t y o f t h e i n t e r i o r a i r .
Do not drive in air recirculation
m o d e f o r p r o l o n g e d p e r i o d s , e x -
c e p t i n t r u l y e x c e p t i o n a l a t m o -
s p h e r i c c o n d i t i o n s .
The message associated with
t h e c o n t r o l i s d i s p l a y e d o n t h e
m u l t i f u n c t i o n d i s p l a y .
Press button 8 t o r e t u r n t o a u t o -
m a t i c c o n t r o l o f t h e a i r i n t a k e . T h e
i n d i c a t o r l i g h t s a r e s w i t c h e d o f f .
For your comfort, when the ignition is
switched off, the settings are stored
until it is switched on again. Rear screen
demisting (9)
T h e h e a t e d r e a r s c r e e n o p e r a t e s i n d e -
p e n d e n t l y o f t h e a i r c o n d i t i o n i n g s y s t e m .
Press button 9 , with the engine
running, to demist the rear screen
a n d t h e m i r r o r s . T h e i n d i c a t o r l i g h t
c o m e s o n .
D e m i s t i n g i s s w i t c h e d o f f a u t o m a t i c a l l y
t o a v o i d a n e x c e s s i v e c o n s u m p t i o n o f
current and in relation to the exterior
t e m p e r a t u r e .
I t m a y b e s t o p p e d b y p r e s s i n g b u t t o n 9
a g a i n o r w h e n t h e e n g i n e i s s w i t c h e d o f f .
H o w e v e r , t h e d e m i s t i n g r e s u m e s i f t h e
engine is switched on again within one
m i n u t e .
Switch off the rear screen and exterior
m i r r o r s d e m i s t i n g w h e n y o u c o n s i d e r
t h i s n e c e s s a r y a s l o w c u r r e n t c o n s u m p -
t i o n r e d u c e s f u e l c o n s u m p t i o n .
Page 42 of 211
3
43
Deactivation of the air conditioning
(A/C-OFF)
Deactivation or activation of the
simultaneous Left-Right control
A c t i v a t i o n o f t h i s f u n c t i o n p e r m i t s t h e
t r a n s f e r o f t h e d r i v e r ' s c o n fi g u r a t i o n t o
t h e p a s s e n g e r .
D e a c t i v a t i o n o f t h i s f u n c t i o n p e r m i t s a
r e t u r n t o t h e i n d e p e n d e n t d r i v e r / p a s -
s e n g e r s e t t i n g s .
A n y m a n u a l a c t i o n o n b u t t o n 4 or 6
c a n c e l s t h e s i m u l t a n e o u s c o n fi g u r a -
t i o n s e t t i n g .
"AIR CON" menu
Press the "MENU" b u t -
ton to gain access to
the general menu, then
c o n fi r m .
The "General menu" a p p e a r s o n t h e
m u l t i f u n c t i o n d i s p l a y .
Select the Air Conditioning icon using
t h e n a v i g a t o r b u t t o n s .
The "Air Conditioning" m e n u a p -
p e a r s o n t h e m u l t i f u n c t i o n d i s p l a y a s
t h e m a i n d i s p l a y .
Additional heating *
V e h i c l e s w h i c h a r e fi t t e d w i t h a n H D I
e n g i n e m a y b e e q u i p p e d w i t h a u t o -
m a t i c a d d i t i o n a l h e a t i n g t o i m p r o v e
y o u r c o m f o r t .
When the engine is idling or when the
v e h i c l e i s s t a t i o n a r y , a h i g h - p i t c h e d
whistling noise and the emission of a
small amount of smoke and odour is
n o r m a l .
* A c c o r d i n g t o c o u n t r y .
D e a c t i v a t i o n m a y r e s u l t i n d i s c o m f o r t
( t e m p e r a t u r e , h u m i d i t y , o d o u r , c o n -
d e n s a t i o n ) .
Y o u c a n c a n c e l t h e d e a c t i v a t i o n b y
p r e s s i n g t h e
"AUTO" button on the air
c o n d i t i o n i n g c o n t r o l p a n e l .