2008 Peugeot 206 S Dag steering wheel adjustment

5FAMILIARISATION-

1. Driver's air bag
Horn

2. Lights and direction indicators
stalk

3. Passenger air bag disarming
switch

4. Rear electric windows disarming
switch

5. Lighting rheostat for instrument
panel

6. Windscreen wiper/windscreen
wash stalk

7. Audio equipment remote control

8. Hazard warning lights switch/
central locking button

9. Multifunction display

10. Windscreen demisting vents

11. Side window demisting vents
12. Adjustable side vent

13. Passenger air bag

14. Adjustable centre vents

15. Glove box

16. Audio equipment

17. Control for heating, ventilation,
air conditioning and heated rear
screen and mirrors

18. Front ashtray

19. Gear lever

20. Lighter

21. Electric mirror controls

22. Rear electric window controls

23. Front electric window controls
24. Handbrake

25. Bonnet release

26. Steering lock

27. Fuse box

28. Storage compartment

29. Steering wheel height
adjustment control

30. Headlamp height adjustment

FAMILIARISATION12 -
REAR BENCH SEAT
To fold down the rear bench seat:
- Lift the front of the seat 1 ,
- Tilt the seat 1 against the front
seats,
- Position the seat belt under the belt holder 2 ,
- Pull control 3 to unlock the seat
back 4 ,
- Remove or lower the head re- straint,
- Tilt the seat back 4 .
When refi tting, take care not to trap
the seat belts.

 46
STEERING WHEEL HEIGHT ADJUSTMENT
When stationary, lower the handle to
release the steering wheel.
Adjust to the desired height and
lift the handle to lock the steering
wheel.

 65

65LAYOUT-
HEADLAMP ADJUSTMENT
Depending on the load in your vehi-
cle, it is recommended that the head-
lamp beam is adjusted.

0. 1 or 2 people in the front seats.

-. 3 people.

1. 5 people.

2. 5 people + maximum authorised
load.

3. Driver + maximum authorised
load.
STEERING WHEEL HEIGHT ADJUSTMENT
When stationary, lower the handle to
unlock the steering wheel.
Adjust to the desired height and
lift the handle to lock the steering
wheel.
HORN
Press one of the spokes of
the steering wheel.

Initial setting is position 0.