1-6 Locking and unlocking
1
To unlockPress the UNLOCK switch (2), and all doors (including the backdoor) will be unlocked. When
they are unlocked with the
room lamp switch at the mi
ddle position (DOOR), the room
lamp will be turned on for appr
oximately 15 seconds and the
turn-signal lamps will blink twice.NOTE●
The indication lamp (3) comes on each time a switch is pressed.
●
If the UNLOCK switch (2) is pressed and no door (includ- ing the backdoor) is opened
within approximately 30 sec-
onds: relocking will automatically occur.
●
It is possible to modify functions as follows: For further information, contact your MITSUBISHI MOTORS Authorized Service Point. • The time for automatic relocking can be changed.• The confirmation function (f
lashing of the turn-signal
lamps) can be set to operate only when the doors and backdoor are locked or only when the doors and back-door are unlocked. • The confirmation function (this indicates locking or unlocking of the doors and backdoor with the flash ofthe turn-signal lamps) can be deactivated. • The number of times the turn-signal lamps are flashed by the confirmation function can be changed.
Operation of the outside rear-view mirrorsTo f o l dWithin 30 seconds of locking the doors and backdoor using theLOCK switch (1), press the LOCK switch twice rapidly to foldthe door mirrors.To e x t e n dWithin 30 seconds of unlocking the doors and backdoor usingthe UNLOCK switch (2), press the UNLOCK switch twicerapidly to return the door mirrors to their extended positions.NOTE●
The keyless entry system does
not operate in the follow-
ing conditions:• The key is left in the key cylinder. • The door (including the backdoor) is open.
●
The remote control switch will operate within about 4 m from the vehicle. However, the operating range of the remote control switch may chan
ge if the vehicle is located
near a power station, or radio/TV broadcasting station.
●
If either of the following problems occurs, the battery may be exhausted. We recommend you to have the battery replaced.• The remote control switch is
operated at the correct dis-
tance from the vehicle, but the doors (including the backdoor) are not locked/unlocked in response.• The indication lamp (3) is dim or does not come on.
●
If your remote control switch
is lost or damaged, please
contact your MITSUBISHI MOTORS Authorized Service Point for a replacement
remote control switch.
BK-BK2008E1ENUK.en-uk-Section4.fm Page 6 Wednesday, January 9, 2008 4:22 PM
