Page 499 of 538
Maintenance
8-49
8
Licence plate lamps
E01004600477
1. Remove the lens mounting screws and remove the socket
and bulb assembly.
2. Remove the socket and bulb assembly (A) together by
turning it anticlockwise and then remove the bulb by pull- ing it out.
3. To install the bulb, perform the removal steps in reverse.
BK-BK2008E1ENUK.en-uk-Section11.fm Page
49 Wednesday, January 9, 2008 4:50 PM
Page 500 of 538
8-50 Maintenance
8
NOTE●
When installing the lens, make
sure the direction of the
lens is installed as shown in the illustration. *: Right side of the vehicle
Room & map lamps
E01004700306
1. Insert a straight blade (or minus) screwdriver with a cloth
over its tip into the lens and pry gently to remove it.
2. Remove the bulb from the lamp holder. 3. To install the bulb, perform the removal steps in reverse.
BK-BK2008E1ENUK.en-uk-Section11.fm Page
50 Wednesday, January 9, 2008 4:50 PM
Page 501 of 538
Maintenance
8-51
8
NOTE●
When installing the lens, align the tab on the lens with the hole on the vehicle side.
Rear personal lamps
E01005200151
When replacing a bulb, keep the
interior lamp switch in the
“ ” (OFF) position. 1. Insert a straight blade (or minus) screwdriver with a cloth
over its tip into the notch of the lens and pry gently toremove it.
2. Remove the bulb from the lamp holder.NOTE●
Wrap a piece of cloth around th
e tip of the screwdriver in
order to avoid scratching the lens.
BK-BK2008E1ENUK.en-uk-Section11.fm Page
51 Wednesday, January 9, 2008 4:50 PM
Page 502 of 538
8-52 Maintenance
8
3. To install the bulb, perform the removal steps in reverse.NOTE●
When installing the lens, align the tab on the lens with the hole on the vehicle side.
Luggage compartment lamp
E01005300211
1. Insert a straight blade (or minus) screwdriver with a cloth
over its tip into the notch of the lens and pry gently to remove the lens.
2. Remove the bulb from the lamp holder. 3. To install the bulb, perform the removal steps in reverse.
BK-BK2008E1ENUK.en-uk-Section11.fm Page
52 Wednesday, January 9, 2008 4:50 PM
Page 503 of 538
Maintenance
8-53
8
NOTE●
When installing the lens, align the tabs on the lens with the holes on the vehicle side.
Door courtesy lamps
E01005400195
1. Insert a straight blade (or minus) screwdriver with a cloth
over its tip into the edge of the lens, pry gently to remove the lens.
2. Remove the bulb from the lamp holder.Front
BK-BK2008E1ENUK.en-uk-Section11.fm Page
53 Wednesday, January 9, 2008 4:50 PM
Page 504 of 538
8-54 Maintenance
8
3. To install the bulb, perform the removal steps in reverse.
NOTE●
When installing the lens, align the 2 tabs on the lens with the notches on the vehicle side.
RearBK-BK2008E1ENUK.en-uk-Section11.fm Page
54 Wednesday, January 9, 2008 4:50 PM
Page 505 of 538
Maintenance
8-55
8
Glove box lamp
E01006100232
1. Pull out the bulb. 2. To install the bulb, perform the removal step in reverse.
Vanity mirror lamps*
E01006200103
1. Insert a straight blade (or minus) screwdriver with a cloth
over its tip into the notch of the lens and pry gently to remove it.
2. Remove the bulb from the lamp holder. 3. To install the bulb, perform the removal steps in reverse.
BK-BK2008E1ENUK.en-uk-Section11.fm Page
55 Wednesday, January 9, 2008 4:50 PM
Page 525 of 538

Alphabetical index
1
A
Accessory socket 5-83 Accessory (Installation) 6Active stability & traction control (ASTC) 4-63Additional equipment 8-28Air conditioningFront automatic air conditioning 5-4Important operation tips for the air conditioning 5-18Rear air conditioning 5-15Air purifier (with deodorizing function) 5-19Airbag 2-58Antenna 5-77Anti-lock brake system (ABS) 4-58Warning lamp 4-60Approach lamp 1-12Armrest 2-10, 2-14Ashtray 5-81AudioError codes 5-72Handling of compact discs 5-74LW/MW/FM electronic tuning radio with CDautochanger 5-43LW/MW/FM electronic tuning
radio with CD player 5-20
Steering wheel remote control switch 5-70Automatic headlamp levelling 3-64Automatic transmissionFluid 9-16Selector lever operation 4-25
Selector lever position 4-28 Sports mode 4-29
B
Backdoor 1-13Battery 8-16Charge warning lamp 3-16Discharged battery (E
mergency starting) 6-2
Specification 9-12Bleeding the fuel system 6-9Bonnet 8-3BrakeAnti-lock brake 4-58Braking 4-56Fluid 8-13, 9-16Parking brake 4-6Power brakes 4-56Warning lamp 3-13Bulb capacity 8-36, 8-38
C
Card holder 5-79, 5-96Cargo area cover 5-103Cargo loads 4-88Catalytic converter 8-3Cautions on handling of 4-wheel drive vehicles 4-53Central door locks 1-9Centre console box 5-94Centre information display 3-17
BK-BK2008E1ENUK.en-ukIX.fm Page 1 Thursday, January 10, 2008 7:53 AM