2008 MITSUBISHI LANCER EVOLUTION X wheel

CONSTRUCTION DESCRIPTION
FOUR-WHEEL ANTI-LOCK BRAKE SYSTEM (4ABS)35B-10
C1014Mutual monitoring of FL wheel
speed sensorExecuted
(Prohibited
when two or
more wheels
are faulty.)ProhibitedExtinguished*2Illuminated*3
C101FMutual monitoring of FR wheel
speed sensor
C102AMutual monitoring of RL wheel
speed sensor
C1035Mutual monitoring of RR wheel
speed sensor
C1041Abnormality in periodical signal
for FL wheel speed sensorExecuted
(Prohibited
when two or
more wheels
are faulty.)ProhibitedExtinguished*2Illuminated*3
C1042Abnormality in periodical signal
for FR wheel speed sensor
C1043Abnormality in periodical signal
for RL wheel speed sensor
C1044Abnormality in periodical signal
for RR wheel speed sensor
C1046FL wheel speed sensor control
phase time exceededExecuted
(Prohibited
when two or
more wheels
are faulty.)ProhibitedExtinguished*2Illuminated*3
C1047FR wheel speed sensor control
phase time exceeded
C1048RL wheel speed sensor control
phase time exceeded
C1049RR wheel speed sensor control
phase time exceeded
C104BAbnormality in FL wheel inlet
valve systemProhibitedProhibitedIlluminatesIlluminates
C104FAbnormality in FR wheel inlet
valve system
C1053Abnormality in RL wheel inlet
valve system
C1057Abnormality in RR wheel inlet
valve system
C105FAbnormality in FL wheel outlet
valve systemProhibitedProhibitedIlluminatesIlluminates
C1063Abnormality in FR wheel outlet
valve system
C1067Abnormality in RL wheel outlet
valve system
C105BAbnormality in RR wheel outlet
valve system
C2104Malfunction of valve power
supply circuitProhibitedProhibitedIlluminatesIlluminates
C1073Malfunction of motor drive
circuitExecutedProhibitedExtinguishedIlluminated*3
DTC
No.Item Countermeasures for failure
EBD control ABS control Brake
warning lightABS warning
light

CONSTRUCTION DESCRIPTION
FOUR-WHEEL ANTI-LOCK BRAKE SYSTEM (4ABS)35B-11
NOTE: .
•*1 This diagnostic trouble code is not set within
the vehicle speed of 20 km/h (12 mph) or less.
•*2 Turns ON when two or more wheels are faulty.
•*3 Stays ON until the vehicle speed reaches 10
km/h (6 mph) when the ignition switch is turned to
ON next time.
DIAGNOSTIC FUNCTION
ABS-ECU has the following functions for easier sys-
tem checks. The following items can be diagnosed
using scan tool.
•Diagnostic trouble code set
•Service data output
•Actuator test.
DIAGNOSTIC TROUBLE CODE SET
There are 43 diagnosis items. Since all the diagnos-
tic results are recorded in volatile memory
(EEPROM*), they are stored in the memory even
though the battery terminals are disconnected.
NOTE: .
•*EEPROM (Electrical Erasable & Programmable
ROM): Special type of memory that can be pro
-
grammed or erased electrically
•For each diagnosis item, refer to Service Manual.
.
SERVICE DATA OUTPUT
Using scan tool, the input data sent from the sensors
and switches can be read.
NOTE: For service data items, refer to Service Man-
ual.
.
C2116Abnormality in pump motor
power supply voltageExecutedProhibitedExtinguishedIlluminated*3
C1000Abnormality in stop light switch
circuitExecutedExecutedExtinguishedExtinguished
C2200Abnormality in ABS-ECUProhibitedProhibitedIlluminatesIlluminates
C2100Battery
voltage
problem (low
voltage)9.7 ± 0.3 V or
less
*1
ExecutedProhibitedExtinguishedIlluminates
8.0 ± 0.5 V or
less
*1
ProhibitedProhibitedIlluminatesIlluminates
C2101Battery
voltage
problem (high
voltage)18.0 ± 1.0 V or
moreProhibitedProhibitedIlluminatesIlluminates
C1395Brake fluid filling not completedExecutedExecutedExtinguishedFlashes (1 Hz)
C2203VIN not writtenExecutedExecutedExtinguishedIlluminates
C1608Implausible diagnosis dataExecutedExecutedExtinguishedExtinguished
U0001Bus offExecutedExecutedExtinguishedExtinguished
U0100Engine time-out errorExecutedExecutedExtinguishedExtinguished
U0141ETACS time-out errorExecutedExecutedExtinguishedExtinguished
U1415Variant coding not implementedExecutedProhibitedExtinguishedIlluminates
U1417Invalid variant coding value
(including wrong assembly)ExecutedProhibitedExtinguishedIlluminates
DTC
No.Item Countermeasures for failure
EBD control ABS control Brake
warning lightABS warning
light

CONSTRUCTION DESCRIPTION
FOUR-WHEEL ANTI-LOCK BRAKE SYSTEM (4ABS)35B-12
ACTUATOR TEST
Using scan tool, the actuators can be forcibly oper-
ated.
NOTE: .
•When ABS-ECU is disabled, the actuator test
cannot be performed.
•The actuator test can be performed only when
the vehicle is stationary. When the vehicle speed
reaches 10 km/h (6 mph), the forcible actuator
operation is disabled.
•During actuator test, the ABS warning light
flashes in 2Hz, and ABS control is prohibited.
•For the actuator test specification, refer to Ser-
vice Manual.

GENERAL INFORMATION
REAR SUSPENSION34-2
GENERAL INFORMATIONM2340000100977
The trailing arm type multi-link suspension is
adopted.
.
MAIN FEATURES
•The wheel tread is increased to improve corner-
ing ability.
•The roll center height is modified to improve the
steering ability.
•A double crossmember is adopted and the upper
arm, lower arm, toe control arm are joined to the
crossmember to improve suspension alignment
accuracy and maintenance performance.
•Improvement of arms installation accuracy elimi-
nates the camber adjustment to improve mainte-
nance performance.
•The trailing arm bushings are installed in the
upper position to improve the movement of the
suspension when the vehicle negotiates bumps
and increase riding comfort.
•Twin tube type shock absorber is adopted to
secure optimum rolling rigidity and improve the
steering ability.
•A high efficiency ball joint type stabilizer link is
adopted to improve steering ability.
•The toe control arm is installed in the lower posi-
tion to increase toe and camber rigidity and
improve steering ability.
CONSTRUCTION DIAGRAM
SPECIFICATIONS
.
SUSPENSION SYSTEM
.
AC606248AB
Stabilizer bar

Trailing arm Stay Rear crossmember Toe control armCoil spring Shock absorber
Upper arm
ItemSpecification
Suspension typeTrailing arm type multi-link

GENERAL INFORMATION
REAR SUSPENSION34-3
WHEEL ALIGNMENT
.
COIL SPRING
ItemSpecification
Camber−0°55'
Toe-in mm (in)3 (0.12)
ItemSpecification
DE, ESGT S
Wire diameter mm (in)11 ( 0 . 4 )11 (0.4)
Mean diameter of coil mm (in)91 (3.6)91 (3.6)
Free length mm (in)351 (13.8)334 (13.1)

GENERAL INFORMATION
FRONT SUSPENSION33-2
GENERAL INFORMATIONM2330000100965
The MacPherson strut type suspension is adopted..
MAIN FEATURES
•The wheel tread is increased to improve corner-
ing ability.
•The roll center height is modified to improve the
steering ability.
•Increased suspension stroke improves road hold-
ing quality, and secures good adhesion even on
bumpy-rough roads to reduce shocks received
when the vehicle negotiates bumps.
•The fully flattened crossmember improves the
left/right direction rigidity of installation points of
the lower arms for high steering ability.
•Tuning of the lower arm bushes improves the
steering ability and riding comfort.
•The stabilizer bar is joined to the strut for high
efficiency to secure the optimum rolling rigidity,
and improves the steering ability.
•Total tuning of struts, springs, and bump rubbers
improves the steering ability and riding comfort.
CONSTRUCTION DIAGRAM
SPECIFICATIONS
.
SUSPENSION SYSTEM
.
WHEEL ALIGNMENT
AC607283AB
Stabilizer bar Coil spring
Front suspension strut Stabilizer link
Lower arm
Front axle crossmember
ItemSpecification
Suspension typeMacPherson strut with coil spring
ItemSpecification
Camber−0°05'

31-1
GROUP 31
WHEEL AND TIRE
CONTENTS
GENERAL INFORMATION . . . . . . . .31-2TIRE PRESSURE MONITORING SYSTEM
(TPMS) . . . . . . . . . . . . . . . . . . . . . . . .31-2

GENERAL INFORMATION
WHEEL AND TIRE31-2
GENERAL INFORMATIONM2310000100941
•The wheels and tires of the following specifica-
tions have been established.
•Adopt the Tire Pressure Monitoring System
(TPMS).
•Warns driver of low tire pressure by illuminat-
ing the TPMS warning light on the combina-
tion meter.
•Warns driver of TPMS probrems by flashing*
the TPMS warning light on the combination
meter.
NOTE: *: Change to continuous illumination
after flashing for about 1 minute.
SPECIFICATIONS
.
ROAD WHEEL AND TIRE
SPARE WHEEL AND TIRE
NOTE: .
•The * mark indicates optional item.
•PCD indicates the pitch circle diameter of the wheel installation holes.
TIRE PRESSURE MONITORING SYSTEM (TPMS)M2310000200067
Refer to GROUP 42B − Keyless Operation System
(KOS)
P.42B-20 or GROUP 42C − Wireless Control
Module (WCM) P.42C-9.
ItemDEESGT S
TPMS warning
pressure kPa
(psi)Warning ON174 (25.2) or less174 (25.2) or less174 (25.2) or less
Warning OFF189 (27.4) or less189 (27.4) or less189 (27.4) or less
WheelTy p eSteel type or
Aluminium type
*
Aluminum typeAluminum type
Size16 × 6 1/2JJ16 × 6 1/2JJ18 × 7JJ
Amount of wheel
offset mm (in)46 (1.8)46 (1.8)46 (1.8)
PCD mm (in)114.3 (4.50)114.3 (4.50)114.3 (4.50)
TireSizeP205/60R16 91HP205/60R16 91HP215/45R18 89V
ItemSpecification
WheelTy p eSteel type
Size16 × 4T
Amount of wheel offset mm (in)40 (1.6)
PCD mm (in)114.3 (4.50)
TireSizeT125/70D16 96M