2008 MITSUBISHI LANCER EVOLUTION X wheel

GENERAL INFORMATION
FRONT AXLE26-3
CONSTRUCTION DIAGRAM
AC606246AC504925
KnuckleStrut assembly
Driveshaft (LH)ETJ (LH)
ETJ (RH) Front hub
EBJ
AB
Driveshaft (RH)
Wheel bearingOil seal
Magnetic
encoder
AB
Dynamic damper
(LH)
Dynamic damper
(RH)

GENERAL INFORMATION
PARKING BRAKES36-2
GENERAL INFORMATIONM2360000100753
A parking brake lever is used to operate the mechan-
ical rear-wheel acting type parking brake.
CONSTRUCTION DIAGRAM


AC609233
Parking brake leverParking brake rear cable
AC
AC609235
AC609234
Parking brake leverParking brake rear cable
AB

GENERAL
BASIC BRAKE SYSTEM35A-2
GENERALM2350000100956
Brake systems with higher reliability and durability
have achieved distinguished braking performance.
FEATURES
.
IMPROVEMENT OF BRAKING PERFOR-
MANCE
•A 10-inch single brake booster with the variable
boost ratio mechanism has been used to assure
maximum braking force with less pedal pressure
in case of emergency.
•In addition to the 10-inch single brake booster, a
small and long stroke-type master cylinder has
been adopted to achieve downsizing and secure
assist force.
•15-inch or 16-inch ventilated disc brakes have
been adopted for the front.
•8-inch leading trailing-type drum brake, 14-inch
or 16-inch solid disc brake has been adopted for
the rear.
.
IMPROVEMENT IN SAFETY
•The 4-wheel anti-lock brake system (4ABS) has
been installed to prevent slippage resulting from
the wheel lock and assure stable vehicle posture
and driveability.
•A rear wheel early lock-prevention proportioning
valve has been used.
•Electronic control braking force distribution sys-
tem (EBD) has been adopted to assure the maxi-
mum braking force independently of the
passenger's position in the vehicle. with ABS>
•X-type piping of brake lines have been adopted
for the front and rear wheels.
•Audible wear indicators are used on the front and
rear brake pads to warn the driver of wear limit.
.
SERVICE QUALITY IMPROVEMENTS
•Diagnostic function has been adopted to ABS for
easier inspection.
•Brake fluid reservoir, master cylinder, and brake
booster have been integrated for downsizing and
better serviceability.

GENERAL
BASIC BRAKE SYSTEM35A-4
SPECIFICATIONS
ItemSpecifications
Master cylinderTy p eTandem type
I.D. mm (in)20.6 (0.81)
Brake boosterTy p eVacuum type, single
Effective dia. of power cylinder mm (in)254 (10.0)
Boost ratioVehicles without ABS6.5 (Pedal pressure: 188N)
Vehicles with ABS6.5 (Pedal pressure: 92N)
8.5 (Pedal pressure: 156N)
Rear wheel hydraulic control typeVehicles without ABSProportioning valves
Vehicles with ABSElectronic control braking force
distribution system (EBD)
Front disc brakeTy p eVehicles with 16-inch wheelFloating caliper 1 piston
ventilated disc (V5-S57)
Vehicles with 18-inch wheelFloating caliper 1 piston
ventilated disc (V6-S57)
Disc effective dia ×
thickness mm (in)Vehicles with 16-inch wheel222 × 26 (8.7 × 1.02)
Vehicles with 18-inch wheel241.6 × 26 (9.5 × 1.02)
Cylinder I.D. mm (in)57.1 (2.25)
Pad thickness mm (in)10.0 (0.39)
Clearance adjustmentAutomatic adjustment
Rear drum brakeTy p eLeading trailing drum
Drum I.D. mm (in)203 (8.0)
Wheel cylinder I.D. mm (in)19.0 (0.75)
Lining thickness mm (in)4 (0.157)
Clearance adjustmentAutomatic
Rear disc brakeTy p eVehicles with 16-inch wheelFloating caliper 1 piston solid disc
(S4-S35)
Vehicles with 18-inch wheelFloating caliper 1 piston solid disc
(S6-S35)
Disc effective dia ×
thickness mm (in)Vehicles with 16-inch wheel226 × 10 (8.9 × 0.39)
Vehicles with 18-inch wheel258 × 10 (10.2 × 0.39)
Cylinder I.D. mm (in)34.9 (1.37)
Pad thickness mm (in)10.0 (0.39)
Clearance adjustmentAutomatic adjustment

CONSTRUCTION DESCRIPTION
BASIC BRAKE SYSTEM35A-8
FRONT BRAKEM2350003000602
Brakes with the following specifications have been
adopted for the front brakes.
•The 1-piston ventilate disc brake (V5-S57 cles with 16-inch wheel> or V6-S57 with 18-inch wheel>) has been adopted.
•An audible wear indicator that informs the driver
of application limit has been adopted onto the
front brake LH pads.
•The outer disc type brake disc which can be tight-
ened together with the wheel has been intro-
duced for better serviceability.
.
DISC BRAKE DESIGNATION
AC609316
AC201769
Wear indicator Brake discPad Normal
AB
At wear limit
<15-inch disc brake (V5-S57)>
<16-inch disc brake (V6-S57)>
No.ItemContents
1Brake disc typeV: Ventilated
S: Solid
2Brake size
(Minimum applicable
disc wheel)
4: 14"
5: 15"
6: 16"
3Number of pistonsS: 1 (Floating type)
4Piston size
(Rounded integral
value)
35: φ 34.9 mm
57: φ 57.1 mm
V 6 - S 57
1 2 3 4
AC505124

CONSTRUCTION DESCRIPTION
BASIC BRAKE SYSTEM35A-9
REAR BRAKEM2350004000616

8-inch leading trailing-type drum brakes have been
adopted for the rear brakes in order to provide stable
braking force at all times both when moving forward
and reverse.

Brakes with the following specifications have been
adopted for the rear.
•The 1-piston solid disc brake (S4-S35 with 16-inch wheel> or S6-S35 18-inch wheel>) has been adopted.
*
•An audible wear indicator that informs the driver
of application limit has been adopted onto the
brake pads.
•The outer disc type brake disc which can be tight-
ened together with the wheel has been intro-
duced for better serviceability.
NOTE: *For the brake disc name, refer to FRONT
BRAKE
P.35A-8.
AC609282
AC609315
AC201769
Wear indicator Brake discPad Normal
AB
At wear limit
<16-inch disc brake (S6-S35)> <14-inch disc brake (S4-S35)>

CONSTRUCTION DESCRIPTION
BASIC BRAKE SYSTEM35A-10
BRAKE LINEM2350005000266
PROPORTIONING VALVE
A proportioning valve is used to prevent early locking
of the rear wheels, in order to provide improved sta
-
bility during braking.
AC609305
From master cylinder rear brake system
To rear brakeO-ring U-packing Sleeve
Guide Seal
Proportioning valveMaster cylinder
SpringPlateValve
AB

35B-1
GROUP 35B
FOUR-WHEEL
ANTI-LOCK BRAKE
SYSTEM (4ABS)
CONTENTS
GENERAL INFORMATION . . . . . . . .35B-2
CONSTRUCTION DESCRIPTION . . .35B-6
SENSOR . . . . . . . . . . . . . . . . . . . . . . . . . . . 35B-6
ACTUATORS . . . . . . . . . . . . . . . . . . . . . . . 35B-6
ABS-ECU. . . . . . . . . . . . . . . . . . . . . . . . . . . 35B-7