2008 MITSUBISHI LANCER EVOLUTION X interior

INSTRUMENT PANEL ASSEMBLY
TSB Revision
INTERIOR52A-3
CAUTION
•Refer to GROUP 52B-SRS Service Precautions P.52B-24 and Air bag Module and Clock Spring
P.52B-367 before removing the passenger side air bag module.
•Do not subject the SRS-ECU to any shocks when removing or installing the instrument panel.
Pre-removal and Post-installation Operation
•Removal and Installation of Front Pillar Trim (Refer to P.52A-10).
•Removal and Installation of Instrument Under Cover
(Refer to P.52A-10).
•Removal and Installation of Glove Box (Refer to P.52A-10).
•Removal and Installation of Instrument Cover Lower, Air
Outlet Garnish (Refer to P.52A-10).
•Removal and Installation of Audio Unit (Refer to GROUP
54A, Radio with CD Player P.54A-307).
•Removal and Installation of Audio Visual Navigation Unit,
GPS antenna (Refer to GROUP 54A, MMCS P.54A-391).
•Removal and Installation of Steering shaft (Refer to
GROUP 37, Steering Column Shaft P.37-25).
•Removal and Installation of Hands-free Cellular Phone
System (Refer to GROUP 54A, Hands-free Module
P.54A-435).
•Removal and Installation of Sensors (Refer to GROUP
55B, Interior Temperature Sensor
P.55B-25).

INSTRUMENT PANEL ASSEMBLY
TSB Revision
INTERIOR52A-4
AC608286
AC610166
Note
: Claw positions
Section A – A Section B – BA
A
B
B
1
2
3
3
12
5
67
9
10
11
8
8
AB
7
Instrument panel
side cover
Instrument panel
side air outlet
Instrument panel core
Instrumentpanel core
4
4
4
d d
d d
d
d
d d
be
e
c
c
a ac
c
c
c
c
c c
c
c
d
Removal steps
1.Instrument panel side cover
•.Combination meter (Refer to GROUP
54A, Combination Meter
P.54A-90).
2.Instrument panel console side cover
3.Instrument panel side air outlet
4.Instrument panel harness clamp
5.Instrument panel assembly
•Photo sensor (Refer to GROUP 55B,
Sensors
P.55B-25).
•Passenger’s (front) air bag module
(Refer to GROUP 52B, Air Bag
Module(s) and Clock Spring
P.52B-367).
6.Instrument panel side bracket lower
7.Instrument panel holder
8.Instrument panel reinforcement
center
9.Ventilator air distribution duct
10.Side defroster duct
11 .Defroster nozzle
12.Instrument panel
Removal steps (Continued)

GLOVE BOX
TSB Revision
INTERIOR52A-5
GLOVE BOX
REMOVAL AND INSTALLATIONM1521011500034
AC610054
Note
: Clip positions
Section B – B Section A – A
A
A B
B
AB
2
5
3
4
1Instrument
panel
Instrument
panel
Clip
Glove box
side panel
Glove box
side panel
Clip
Removal steps
1.Bottom cover (passenger side)
2.Glove box side panel
3.Glove box damper glove box damper>
4.Glove box
5.Glove box cover
Removal steps (Continued)

INSTRUMENT CENTER PANEL
TSB Revision
INTERIOR52A-6
INSTRUMENT CENTER PANEL
REMOVAL AND INSTLLATIONM1521011300030
AC610150
Section B – B
Section A – A
B
B
AB
3 4
2
Instrument panel
under cover ,
Instrument panel
Claw
Instrument panel
console box ,
Instrument center panel
Instrument panel
Clip
Note
: Clip positions
: Claw positions
B
B A
A
Instrument
center panel
1
Removal steps
•.Glove box side panel (Refer
to
P.52A-5).
1.Instrument panel air outlet garnish
lower (RH)
2.Instrument center panel
•.Floor console assembly (Refer to
P.52A-8).
3.Instrument console box
•.Floor console side cover (Refer to
P.52A-8).
4.Instrument under cover
Removal steps (Continued)

INSTRUMENT LOWER PANEL
TSB Revision
INTERIOR52A-7
INSTRUMENT LOWER PANEL
REMOVAL AND INSTALLATIONM1521011700038
AC610152
Section B – B Section C – C
Section A – A A
A
1
Knee airbag
Instrument panel
Bottom cover
assembly
B
B
C
C
Note
: Clip positions
: Claw positions
Clip
Knee airbagInstrument panel
cover lower
Claw
Claw
2
AB
Instrument panel
cover lower
Removal steps
1.Instrument panel cover lower
2.Instrument panel air outlet garnish
lower (LH)

FLOOR CONSOLE ASSEMBLY
TSB Revision
INTERIOR52A-8
FLOOR CONSOLE ASSEMBLY
REMOVAL AND INSTALLATIONM1521005200368
AC608810AB
135
6
11 4

4
12
8
1
3
2
9
14
14
15
16
10
Section D – D
A
A
Note
: Clip positions
: Claw positions
Clip
Claw
14
Section A – A Section B – B Section C – C
Clip
Clip
13
10
7
B
B
D
D
7
CC

FLOOR CONSOLE ASSEMBLY
TSB Revision
INTERIOR52A-9
REASSEMBLY SERVICE POINT
.
>>A<< FLOOR CONSOLE REASSEMBLY
Floor console rear ends (shown in the dotted lines) may dam-
age when removing the floor console cover. You can neglect
this damage and floor console is reusable.
Removal steps
1.Floor console assembly
2.Heated seat switch
3.Shift knob
4.Floor console panel assembly
5.Floor console assembly
6.Floor console harness
7.Floor console cover
8.Floor console box
9.Floor console lid
>>A<<10.Floor console
11 .Floor console bracket rear
12.Floor console bracket (A)
13.Floor console bracket (B)
14.Floor console side cover
15.Floor console front bracket (LH)
16.Floor console front bracket (RH)
Removal steps (Continued)
AC611409
Floor consoleFloor console
cover
AB

TRIMS
TSB Revision
INTERIOR52A-10
TRIMS
REMOVAL AND INSTALLATIONM1521001101049
Required Special Tool:
•MB990784: Ornament Remover
AC610310
45
1 3
6
2 79
11
12
10
13
AB
8
14
22 ± 4 N·m
16 ± 3 ft-lb
Removal steps
1.Front scuff plate
2.Cowl side trim
•Rear seat cushion (Refer
to
P.52A-23).
3.Rear scuff plate
4.Front door opening trim
5.Rear door opening trim
<>6.Front pillar trim
7.Lower center pillar trim
8.Upper center p illar trim cap
•Outer seat belt (Refer toP.52A-28).
9.Upper center pillar trim
10.Rear pillar trim
•Seat side back (Refer toP.52A-23).
11 .Rear shelf trim
12.Rear end trim
13.Trunk side trim
14.Child restraint fitting
Removal steps (Continued)