2008 MITSUBISHI GRANDIS start stop button

4-6 Starting and driving
4Parking brake
E00600500666
To park the vehicle, first bring it to a complete stop, fully
engage the parking brake, and then move the gearshift lever to
1st (on an uphill) or Reverse (on a downhill) position, for vehi-
cles with M/T or set the selector lever to “P” (PARK) position
on A/T vehicles.To applyTo release1- Pull the lever up without pushing the button at the end of
hand grip.
1- Pull the lever up slightly.
2- Push the button at the end of hand grip.
3- Push the lever downward.
BK-XP08E1ENUK.en-uk.book Page 6 Monday, August 13, 2007 2:20 PM

5-44 For pleasant driving
5
To find the start of each track on a disc for playbackPress the SCAN button (6). “SCAN” will appear on the display
and the CD player will play back the first 10 seconds of each
track on the selected disc.
The track number will blink while the scan mode is selected.
To exit the scan mode, press the SCAN button again.NOTE●Once all tracks on the disc have been scanned, playback
of the disc will restart from the beginning of the track that
was playing when scanning started.
●The scan mode will be canceled by selecting radio or CD
operation and pressing the RPT/RDM button (14), the
TRACK button (5) or the CD eject button (1).
●With a disc that contains both CD-DA and MP3 files, the
scan mode causes only files of the same format (CD-DA
only or MP3 files only) to be played.To eject a discWhen the CD eject button (1) is pressed, the disc automatically
stops and is ejected. The system automatically switches to
radio mode.CD text and MP3 title display
E00725000298
This CD player can display CD text and MP3 titles including
ID3 tag information.
CD text
The CD player can display disc and track titles for discs
encoded with disc and track title information. Press the TEXT
button (9) repeatedly to make selections in the following
sequence: disc name → track name → normal display mode.
NOTE●The display can show up to 10 characters. If a disc name
or track name has more than 10 characters, press the
PAGE button (11) to view the next 10 characters.
●When there is no title information to be displayed, the dis-
play shows “NO TITLE”.
●Characters that the CD player cannot display are shown as
an asterisk.
BK-XP08E1ENUK.en-uk.book Page 44 Monday, August 13, 2007 2:20 PM

5-46 For pleasant driving
5
With a CD autochanger
1. Press the CD button (11), and the CD autochanger mode
will be selected, starting playback.
2. To adjust the volume and tone, refer to “To adjust the vol-
ume” on page 5-24 and “To adjust the tone” on page 5-24.
3. To stop the CD player, turn off the power by pressing the
PWR switch (13) or switch to the radio mode by pressing
the AM/FM button (7).
4. For information concerning the handling of compact
discs, refer to “Handling of compact discs” on page 5-49.
To select a desired disc (CD autochanger only)
You can select by using the DISC button (10 or 12).
Disc up
Press the DISC button (12) until the desired disc is reached.
The disc indicator (16) will display the selected disc number.
Disc down
Press the DISC button (10) until the desired disc is reached.
The disc indicator (16) will display the selected disc number.BK-XP08E1ENUK.en-uk.book Page 46 Monday, August 13, 2007 2:20 PM