2008 MERCEDES-BENZ C300 wheel

[x] Cancel search: wheel

Page 363 of 509

MERCEDES-BENZ C300 2008 W204 Owners Manual 362 Operation
Maintenance
We strongly recommend that you have 
your vehicle serviced at an authorized 
Mercedes-Benz Center, in accordance with 
the Maintenance Booklet at the times 
called for by the

Page 364 of 509

MERCEDES-BENZ C300 2008 W204 Owners Manual 363 Operation
Maintenance
Maintenance service term exceeded
If you have exceeded the suggested main-
tenance service term, you will see the fol-
lowing message in the multifunction 
display:
Service A

Page 367 of 509

MERCEDES-BENZ C300 2008 W204 Owners Manual 366 Operation
Vehicle care
Engine cleaning
Prior to cleaning the engine compartment, 
make sure to protect electrical compo-
nents and connectors from contact with 
water and cleaning agents.
Corrosio

Page 370 of 509

MERCEDES-BENZ C300 2008 W204 Owners Manual 369 Operation
Vehicle care
Cleaning the panorama roof with 
tilt/sliding panel*
The rear part of the tilt/sliding panel has a 
protective layer on the inside. 
Use a soft, clean cloth and a mild 
win

Page 371 of 509

MERCEDES-BENZ C300 2008 W204 Owners Manual 370 Operation
Vehicle care
Light alloy wheels
If possible, clean wheels once a week.
Use Mercedes-Benz approved Wheel 
Care, a soft bristle brush and a strong 
spray of water for cleaning the light a

Page 372 of 509

MERCEDES-BENZ C300 2008 W204 Owners Manual 371 Operation
Vehicle care
Audio display
If you need to clean the audio display 
screen, use a standard microfiber cloth 
and cleaning agent for TFT/LCD dis-
plays. After cleaning, dry and polish the

Page 373 of 509

MERCEDES-BENZ C300 2008 W204 Owners Manual 372 Operation
Vehicle care
Upholstery
Using aftermarket seat covers or wearing 
clothing that have the tendency to give off 
coloring (e.g. when wet, etc.) may cause 
the upholstery to become permanen

Page 375 of 509

MERCEDES-BENZ C300 2008 W204 Owners Manual 374 Practical hints
What to do if …?
Lamps in instrument cluster
General information:
If any of the following lamps in the instru-
ment cluster fails to come on during the 
bulb self-check when swit