2008 MERCEDES-BENZ C-Class navigation

117 Navigation
Introduction
Navi submenus
Menu overview
Navi
Selecting map display
Setting route calculation mode
Setting Block Area
Selecting information on map
Switching highway information on/off
Guide Route (with active route
guidance)Position6 (with active route
guidance)Destination
Selecting POI in depict-
ed map segment, if avail-
ableOpening detour function
Having alternative route
calculated
Opening destination in-
formation
Opening route browserSave vehicle location or
crosshairs position
i The crosshairs position
can be saved if the
crosshairs are displayed on
the map, e.g. (
page 119).
Display vehicle position
map
Display destination
position map
Repeating current navi-
gation announcementCancel route guidance
Entering destination

via address

from memory

from “Last destina-
tions” memory

as POI

via map

as stopover destina-
tion
Saving destination

118 Navigation
Introduction
Press the function button z.
or
Select “Navi” in the main function
menu.
This displays the map with the menu
system either displayed or hidden.
i If the message “Please insert the map DVD
to activate Navigation.
” appears instead of the
map display, see (
page 115).Map without activated route guidance and
with menu system displayed
1Menu system, status line
2Menu system, with main functions
3Current vehicle location
4Menu system, navigation submenu
Map without activated route guidance and
with menu system hidden
1Current vehicle location
2Set map orientation (
page 120)
3Set map scale (
page 119)
Switching to navigation mode

119 Navigation
Introduction
Displaying/hiding menu system
To hide: Slide qm and when the menu
item “Full Screen” is displayed press
n.
The menu system is hidden. This dis-
plays the map in full screen mode.
To display: In full-screen map mode
press n.
or
Press the function button z.
Setting the map scale
i You can only set the map scale when the
menu system is hidden (map in full-screen
mode).
Rotate ymz until the required map
scale is set.
The map scale 3 is displayed as soon
as you start rotating ymz. Rotating
clockwise makes the map smaller, ro-
tating anticlockwise enlarges it.1Currently set map scale as number,
here 1 mi (1 inch on the map corre-
sponds to 1 mi)
2Indicator on the map scale pointing to
the currently selected map scale
3Map scale
Saving current vehicle location as des-
tination in the last destinations
To display menu system if applica-
ble: Press n.
To save: Select “Position” K “Save Ve-
hicle Position”.
COMAND saves the current vehicle lo-
cation as a destination in the last desti-
nations memory (
page 162). A
window appears containing a corre-
sponding message.
To exit menu: Slide omp or press the
í button.
Scrolling the map
i You can only scroll the map when the menu
system is hidden.
Hide menu system if applicable
(
page 119).
Slide qmr, omp or wmx.
Crosshairs will appear on the map.
1Current vehicle location
2Crosshairs
3Information on crosshairs position
4Set map scale
i The display 3 may for example be a road if
corresponding data is available in the digital map
and “Current Street” is activated. Or it displays
the geo-coordinate position of the crosshairs if
“Geo-coordinates” display is activated.
(
page 124).

120 Navigation
Introduction
Saving crosshairs position as destina-
tion in the last destinations
To display menu system if applica-
ble: Press n.
To save: Select “Position” K “Save
Crosshair Position”.
COMAND saves the crosshairs position
as a destination in the last destinations
memory (
page 162). A window ap-
pears containing a corresponding mes-
sage.
Hiding crosshairs
Press the í button.
The crosshairs disappear and the map
is set to the vehicle location.
or
Set the map to the vehicle location, see
description below.Setting map to vehicle or destination
location
i If you have moved the map, you can quickly
move the map to the vehicle or destination loca-
tion using this function. It is only possible to set
it to the destination location when route guid-
ance is active.
To display menu system if applica-
ble: Press n.
To set map to vehicle location:
Select “Position”
K “Vehicle Position
Map”.
or
Press the í button if the crosshairs
are displayed.
i This hides the crosshairs.
To set to destination location: Select
“Position”
K “Destination Position
Map”.
The crosshairs position is then set to
the destination.
i You can perform the settings listed below
with route guidance inactive or active.
Map display
Map orientation
1Currently set map orientation
The following displays are possible:

9 = orientation to north (the map dis-
play is oriented to the north, north is al-
ways at the top)

8 = Driving direction (the map display
is oriented in the direction of travel, the
direction of travel is always at the top,
the orange tip of the symbol points
northwards)
Basic settings

121 Navigation
Introduction

8 = Bird’s-eye view (the map display is
oriented in the direction of travel, the
map projection reproduces the curva-
ture of the earth’s surface, the orange
tip of the symbol points northwards)
Example of map from bird’s-eye view
1Current crosshairs location
2Currently set map orientation
To set map orientation: Display menu
system if applicable (
page 119).
Select “Navi” K “Map Display”.
A dotRindicates the current setting.1Options for map orientation
2Options for POI symbols (
page 121)
Select “North Up” or “Heading Up” or
“Bird‘s-eye View”.
To exit menu: Slide omp.
Hide menu system if applicable
(
page 119).
The map orientation changes accord-
ingly.
Setting POI symbols
You can select which POIs are to be dis-
played as symbols on the map. Points of in-
terest include, for example, gas stations,
hotels, cinemas and restaurants.The following settings are available:

“Standard Symbols”
Displays the factory-set symbols

“Personal Symbols”
You can choose the symbols yourself.

“No Symbols”
To set: Display menu system if applica-
ble (
page 119).
Select “Navi” K “Map Display”.
Select “Standard Symbols” or “Personal
Symbols” or “No Symbols”.
If you have selected “Personal Sym-
bols”, the list of POIs will be displayed.
To switch symbol display on/off:
Select the corresponding POI.
Depending on the previous status,
the corresponding symbol displays
will be switched on D or off C.
You may also activate the symbol
displays for several POIs.
i The list indicates all symbols for all coun-
tries that are contained in the digital map. How-
ever, not all POIs are available in all countries. As
a result, certain POI symbols may not be shown
on the map even though the symbol display is
switched on.


122 Navigation
Introduction
To exit menu: Slide omp.
Hide menu system if applicable
(
page 119).
Route mode
This functions allows you to set the follow-
ing options for route guidance:

“Avoid Highways”

“Avoid Toll Roads”

“Avoid Tunnels”

“Avoid Ferries”

“Avoid AutoTrains”
1Sets route options
Setting route options
To set: Display menu system if applica-
ble (
page 119).
Select “Navi” K “Mode”.
To switch option on/off: Select re-
quired option.
Depending on the previous status, the
option will be switched on D or off C.
You may activate several options.
i The calculated route may include ferry con-
nections, for example, even if the option “Avoid
ferries” has been activated.
i If you change the route type setting when
route guidance is active, COMAND calculates a
new route.
Block Area
You can define an area within the map dis-
play that is not to be used by the system in
calculating a route, if possible.
i The calculated route may include a blocked
area if the destination is within a blocked area or
if the destination can only be reached using
roads that lead through a blocked area.
To set, change or delete: Display
menu system if applicable
(
page 119).
Select “Navi” K “Block Area”.If no areas were previously set, the
map display appears ready to select
an area.
Slide qmr, omp or wmx to select an
area.
Press n.
The blocked area appears in red.
Rotate ymz to change the size of the
blocked area.
Press n.
The area is added to the blocked area
list

123 Navigation
Introduction
A checked entry indicates an active
blocked area.
i You can block several areas for the route
calculation and activate or de-activate them by
setting or removing the check mark.
Displaying and changing an existing
block area
To select the area you want to dis-
play or change: Slide qmr.
Select “Display/Change”.
The map display appears with the block
area marked red.
Rotate ymz until the desired size of
the block area is set.
Slide qmr, omp or wmx to shift the
block area to the desired region.
To confirm the area and exit map
display: Press n.
Hide menu system if applicable
(
page 119).
Defining a new Block area
Select “Avoid New Area”.
The map display appears with a default
new block area in red.
Rotate ymz until the desired size of
the new block area is set.
Slide qmr, omp or wmx to shift the
new block area to the desired region.
To confirm the area and exit map
display: Press n.
Hide menu system if applicable
(
page 119).
Deleting a block area
To select the area you want to de-
lete: Slide qmr.
Select “Options” K“Delete”.
You will be prompted to confirm that
you wish to delete the block area.
Select “Yes” or “No”.If you select “Yes” COMAND deletes
the entry. A message will be displayed.
Information on map
You can have map information displayed at
the bottom edge of the screen during route
guidance.
To set: Display menu system if applica-
ble (
page 119).
Select “Navi” K “Information On Map”.
A dotR indicates the current setting.
Select “Arrival Time / Distance” or
“Current Street” or “Geo-coordinates”
or “None”.
To exit menu: Slide omp.
Hide menu system if applicable
(
page 119).

124 Navigation
Introduction
Time of arrival/distance to destination
Map with display activated for time of arriv-
al/distance
1Symbol for destination
2Distance to the destination
3Symbol for estimated time of arrival
4Estimated time of arrival
i This display can only be seen during route
guidance. In the “Move map” function you will
see other data depending on the crosshairs posi-
tion, for example a street name if the digital map
supports this data.
Current street
Map with road display activated
1Road name or road number, e.g. for
highways
Geo-coordinates display
Map with geo-coordinates display activated
1Current height above sea level (round-
ed off to 50 m)
2Coordinates display of the current vehi-
cle location (latitude)
3Coordinates display of the current vehi-
cle location (longitude)
4Number of GPS satellites currently be-
ing used
i Adequate GPS reception must be available
for all displays. The altitude display 1 may differ
from reality because the navigation system cal-
culates it using the GPS signals.
i In the “Move map” function the displays 1
and 4 are not displayed. The geo-coordinate
position of the crosshairs is displayed.
“None” menu option
Map with display switched off
1Currently set map orientation
i In the “Move map” function you will see oth-
er data depending on the crosshairs position, for
example a road name if the digital map supports
this data.