2008 MERCEDES-BENZ C-Class warning

113 Navigation
Introduction
Update sequence
The sequence includes the following stag-
es:

Loading DVD into the DVD changer

Update process
i The update process may take between 60
and 150 minutes, depending on the size of the
map software.
If possible, perform the update when the vehicle
is stationary. The DVD read speed is faster when
the vehicle is stationary than when the vehicle is
moving and the update therefore takes less time.
If you perform the update with the engine off and
the vehicle battery is no longer powerful enough,
COMAND may shut off automatically during the
process to protect the battery. In this case, re-
start the update with the engine running.
You can interrupt the update process and contin-
ue it at a later time. If you cancel the update pro-
cess, the navigation system is not ready for
operation.
Loading DVD into DVD changer
The DVD changer is a magazine with six
built-in compartments.
1Disc slot
2Load button
Press the Load button2.
A menu indicates which magazine com-
partments are currently loaded.
To select an empty magazine com-
partment: Rotate ymz or slide omp.
To start loading: Press n.
The message “Please Insert Disc ”
will then be displayed.
Insert the DVD into the slot1 with the
printed side upwards.
The DVD changer pulls in the DVD. The
message “Loading Disc ...” will be
displayed.
i If the magazine is full, you will first need to
eject a disc (
page 57).
G Warning
Never leave the engine running in an en-
closed space. The exhaust gases contain
carbon monoxide. Inhaling exhaust gases
constitutes a health hazard and could lead
to loss of consciousness or even death.

126 Navigation
Destination input
i You can enter a destination, regardless of
whether or not route guidance is active.
The following destination input options are
available:

Entering a destination via the address

Entering a destination from the desti-
nation memory

Entering destination from the last des-
tinations

Entering a POI

Entering a destination via the map

Entering a stopover destination
i In some countries, it is not possible to enter
addresses at vehicle speeds above apprx.
3 mph. The function becomes available again as
soon as the speed falls below apprx. 2mph.
i Set the system language (page 171).
The following options are available for en-
tering a destination via an address:

Entering state/province, city/zip code
and street

Entering state/province, city and city
center

Entering state/province, city/zip code,
street and house number

Entering state/province, city/zip code,
street and junction
Route calculation can then be started
(
page 135).
Opening Enter Destination menu
If necessary switch to navigation mode
and display menu system
(
page 118).
Select “Destination” K “Address Ent-
ry”.The Enter Destination menu appears.
Enter Destination menu
Menu items in Enter Destination menu
Some menu items are not available or not
yet available, depending on the letters en-
tered for the address or the data for the
digital map.
Example:
After the state/province has been select-
ed the menu items “Street”, “No.”,
“Center”, “Intersection”, “Save” and “Start”
are not yet available. Or the “ZIP” menu
item is not available if the digital map does
not contain any zip codes.
Destination input
Introduction to destination input
G Warning
For safety reasons, only enter a new desti-
nation when the vehicle is stationary.
Entering a destination via the ad-
dress

148 Navigation
Route guidance
COMAND guides you to the destination by
means of driving recommendations in the
form of navigation announcements or
route guidance displays.
i The route guidance displays only appear if
the display has been switched to navigation
mode.
If for some reason you do not follow the
driving recommendations or leave the cal-
culated route, COMAND automatically cal-
culates a new route to the destination.
If the map data contains corresponding in-
formation during route guidance
COMAND tries to avoid roads with limited
passability, e. g. roads that are blocked for
through-traffic and are for residents only.
Time restrictions of roads (e.g. blocked on
Sundays and public holidays) are only tak-
en into account for route guidance if the
digital map contains corresponding infor-
mation during the blocked time periods.Driving maneuvers are given in three phas-
es:

Preparation phase

Announcement phase

Maneuver phase
Route guidance
General information
G Warning
COMAND calculates the route to the desti-
nation without taking account of the follow-
ing:

Traffic lights

Stop and right-of-way signs

Lane merging

Parking or stopping prohibited areas

Other road and traffic rules and regula-
tions

Narrow bridges
COMAND may give incorrect navigation
commands if the data in the digital map
does not correspond with the actual road/
traffic situation. For example, if the traffic
routing has been changed or the direction of
a one-way road has been reversed.
For this reason, you must always observe
applicable road and traffic rules and regula-
tions during your journey. Road and traffic
rules and regulations always have priority
over the navigation commands generated by
the system.
Driving maneuver

152 Navigation
Route guidance
Once you have reached your destination, a
checkered flag is displayed and route guid-
ance is ended automatically.Route guidance to an off-road destina-
tion
COMAND can also guide you to destina-
tions that are within the area covered by
the digital map, but are not themselves in-
cluded on the map.
Such destinations are off-road destina-
tions, which you can enter, for example, by
entering the destination via the map.
In this case, COMAND guides you on roads
known to the system for as long as possi-
ble using navigation announcements and
route guidance displays.1Off-road destination
2Off-road route segment (dashed line)
3Current vehicle location, tip of the tri-
angle points in the vehicle’s direction
of travel
4Off-road, no road name available
Just before reaching the last known point
on the map, the message “You will enter an
area with unreliable map data in xx miles” is
announced.
When the vehicle is entering the area that
is not covered by the digital map, the
screen is split. On the right half of the
screen an arrow appears that points to the
off-road destination
1 and the system
announces: “Please follow the arrow on the
display”. When the vehicle comes close to
the destination the message “Destination
region reached” is given.
Destination or destination region
reached
Off-road and off-map
G Warning
The COMAND navigation system may direct
you to off-road routes that your vehicle may
not be capable of traversing through without
damaging your tires, wheels or vehicle. It is
the driver’s sole responsibility to determine
the suitability of the route. Off-road routes
may be of varying conditions and their ap-
propriateness for use may be affected by
various factors such as time of day, time of
year and immediate weather conditions that
cannot be judged or taken into consider-
ation by the COMAND system.

153 Navigation
Route guidance
Route guidance from an off-road posi-
tion to a destination
If the vehicle location is within the area
covered by the digital map, but the map it-
self does not contain any information on
the location, the vehicle is in an off-road
position. COMAND can guide you from
such a position to a destination.
At the start of route guidance you will see
the message “Off Mapped Road”, an arrow
and the distance to the destination. The ar-
row indicates the direction of the actual
destination.
The blue marking for the route on the map
starts from the nearest road known to the
system.
As soon as the vehicle is travelling again on
a road known to the system, route guid-
ance continues in the usual manner.
Route guidance from an off-map posi-
tion to a destination
If the vehicle location is outside the area
covered by the digital map, then the vehi-
cle is in an off-map position.
COMAND can guide you from such a posi-
tion to a destination.At the start of route guidance you will see
the message “Off Map”, an arrow and the
distance to the destination. The arrow indi-
cates the direction of the actual destina-
tion.
The blue marking for the route on the map
starts from the nearest road known to the
system.
As soon as the vehicle is travelling again on
a road known to the system, route guid-
ance continues in the usual manner.
Off-road during route guidance
The actual path of the road may deviate
from the data in the digital map due to road
works.
In cases like this, the system is temporarily
not able to locate the vehicle location on
the digital map; the vehicle is thus in an off-
road position.
The display then shows the message “Off
Mapped Road”, an arrow and the distance
to the destination. The arrow indicates the
direction of the actual destination.
As soon as the vehicle location is found
again, route guidance continues in the usu-
al manner.
i During an active telephone call, the naviga-
tion announcements are suppressed.
If you missed an announcement, you can
request a current announcement at any
time.
To request current announcement:
Select “Navi”
K 6.
or
In the map display with the menu sys-
tem displayed (
page 119) select
6.
To switch off navigation announce-
ments: Press
V during the announce-
ment.
Navigation announcements
G Warning
Navigation announcements are intended to
direct you while driving without diverting
your attention from the road and driving.
Please always use this feature instead of
consulting the map display for directions.
Consulting the symbols or map display for
directions may cause you to divert your at-
tention from driving and increase your risk
of an accident.


176 Voice Control
Overview
The following symbols indicate:
sthat you have to say something
tthat there is a voice output from the
voice control
uthat the system shows information
on the display.
You can use the voice control system to
operate the following systems depending
on the equipment in your vehicle:

Phone

Navigation

Address book

Audio (radio, satellite radio*,
DVD changer, memory card,
music register)
Say the commands without pausing
between individual words. If you enter a
command that does not exist or is incor-
rect, the voice control system asks you for
a new command with “Please repeat” or
“Please repeat your entry!”.
Overview
Operating Safety
G Warning
Please devote your attention first and fore-
most to the traffic situation you are in. While
the system permits hands-free phone oper-
ation, attention to traffic may be diverted
not only by physical operation of a phone,
but also by the distraction of a phone con-
versation while driving. As such, for safety
reasons, we encourage the driver to stop the
vehicle in a safe place before answering or
placing a phone call.
For safety reasons, you should only select a
destination when the vehicle is stationary.
While the navigation system provides direc-
tional assistance, the driver must remain fo-
cused on safe driving behavior, especially
attention to traffic and street signs, and
should utilize the system’s audio cues while
driving.
The navigation system does not supply any
information on stop signs, yield signs, traffic
regulations or traffic safety rules. Their ob-
servance always remains in the driver’s per-
sonal responsibility. DVD maps do not cover
all areas nor all routes within an area.
Traffic regulations always have priority over
any route recommendations given.
Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your vehicle is
covering a distance of 44 feet (approximate-
ly 13.5 m) every second.
G Warning
Navigation announcements are intended to
direct you while driving without diverting
your attention from the road and driving.
Please always use this feature instead of
consulting the map display for directions.
Consulting the symbols or map display for
directions may cause you to divert your at-
tention from driving and increase your risk
of an accident.
G Warning
Please do not use the Voice Control System
in an emergency, as the tone of your voice
may change in a stressful situation. This
could cause a delay in completing your
phone call in a timely manner. This could
distract you in an emergency situation and
cause you to be involved in an accident.
Symbols only used in this chapter
Usage

179 Voice Control
Phone operation
You can use voice control to:

place a call by using your voice to input
a phone number

store names and numbers in the ad-
dress book

dial a number from the address book

listen to the phone book

retrieve and manage your voice mail
and recorded announcement services

redial
Voice control recognizes whether:

your phone is switched on

your phone is connected via Bluetooth

the car phone is registered with the rel-
evant mobile phone network

it is possible to dial

the PIN has been entered
If it is not possible to dial, voice control is-
sues a message to this effect.
i You can still operate your phone using the
keypad.
Phone operation
G Warning
Some jurisdictions prohibit the driver from
using a cellular telephone while driving.
Whether or not prohibited by law, for safety
reasons, the driver should not use the cellu-
lar telephone while the vehicle is in motion.
Stop the vehicle in a safe location before
placing or answering a call.
If you nonetheless choose to use the mobile
phone while driving, please use the hands-
free feature and be sure to pay attention to
the traffic situation at all times. Use the mo-
bile phone only when road, weather and traf-
fic conditions permit. Otherwise, you may
not be able to observe traffic conditions and
could endanger yourself and others.
Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your vehicle is
covering a distance of 44 feet (approximate-
ly 14 m) every second.
G Warning
Never operate radio transmitters equipped
with a built-in or attached antenna (i.e. with-
out being connected to an external antenna)
from inside the vehicle while the engine is
running. Doing so could lead to a malfunc-
tion of the vehicle’s electronic system, pos-
sibly resulting in an accident and/or
personal injury.
Operation

183 Voice Control
Navigation
Navigation
G Warning
For safety reasons, you should only select a
destination when the vehicle is stationary.
While the navigation system provides direc-
tional assistance, the driver must remain fo-
cused on safe driving behavior, especially
attention to traffic and street signs, and
should utilize the system’s audio cues while
driving.
The navigation system does not supply any
information on stop signs, yield signs, traffic
regulations or traffic safety rules. Their ob-
servance always remains in the driver’ per-
sonal responsibility. DVD maps do not cover
all areas nor all routes within an area.
Traffic regulations always have priority over
any route recommendations given.
Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your vehicle is
covering a distance of 44 feet (approximate-
ly 13.5 m) every second.
G Warning
During route guidance, you will not receive
information on:

traffic lights

stop and yield signs

parking or stopping zones

one-way streets

narrow bridges, or

other traffic regulation data.
You should therefore always strictly observe
traffic regulations while driving. Drive care-
fully and always obey traffic laws and road
signs, even if they contradict navigation sys-
tem instructions.
G Warning
Navigation announcements are intended to
direct you while driving without diverting
your attention from the road and driving.
Please always use this feature instead of
consulting the map display for directions.
Consulting the symbols or map display for
directions may cause you to divert your at-
tention from driving and increase your risk
of an accident.
G Warning
Please do not use the Voice Control System
in an emergency, as the tone of your voice
may change in a stressful situation. This
could cause a delay in completing your
phone call in a timely manner. This could
distract you in an emergency situation and
cause you to be involved in an accident.