2008 Lexus IS F change wheel

Finish
OTHER FUNCTIONS
130
FCC ID: HYQBT0501A
IC ID: 1551A−BT0501A
MADE IN JAPAN
This device complies with Part 15 of the
FCC Rules and RSS −210 Rules. Op-
eration is subject to the following two
conditions: (1) this device may not
cause harmful interference, and (2) this
device must accept any interference re-
ceived, including interference that may
cause undesired operation.
CAUTION
Changes or modifications not ex-
pressly approved by the party re-
sponsible for compliance could void
the user’s authority to operate the
equipment.
CAUTION: Radio Frequency Radi-
ation Exposure
This equipment complies with FCC
radiation exposure limits set forth for
uncontrolled equipment and meets the
FCC radio frequency (RF) Exposure
Guidelines in Supplement C to OET65.
This equipment has very low levels of
RF energy that it deemed to comply
without maximum permissive expo-
sure evaluation (MPE). But it is desir-
able that it should be installed and op-
erated with at least 20 cm and more be-
tween the radiator and person’s body
(excluding extremities: hands, wrists,
feet and legs).
Co− location: This transmitter must
not be co− located or operated in con-
junction with any other antenna or
transmitter. To use the hands−
free system, you
need to enter your phone into the sys-
tem. Once you have registered it, you
can make a hands− free call.
1. Push the “INFO” button.
2. Touch “Telephone” to display “Tele-
phone” screen.
You can also push
of the steering
wheel to display this screen when the ve-
hicle is stopped.
3. Touch “Settings” to display “Set-
tings” screen.
IS F/350/250_Navi_U
(L/O 0712)
— Enter a Bluetooth rphone

Finish
OTHER FUNCTIONS
137
DWhen a telephone number registered
in phone book is received, the name
and the number are displayed.
DReceived calls which you did not
answer are also memorized in the
system and “Abs.”is displayed on the
left side of the number.
DUnnoticed telephone number such as
a public telephone is not memorized in
the system.
3. Select the desired number from the
list.
Touchor pushof the steering
wheel.
DA international phone call may not be
made depending on the cellular phone
which you have.
DBy speed dial
You can call by registered telephone
number which you selected from a
phone book, dialed numbers and re-
ceived calls. (See “(a) Registering the
speed dial” on page 144 for registering
the speed dial.)
1. Touch “Speed Dial” to display
“Speed Dial” screen.
2. Touch the desired number to call.
You can change the page by touching
“Speed Dial 2” or “Speed Dial 3”.
When you push the telephone switch while
driving, the screen above appears. Touch
the desired name to call. (The telephone
number is not displayed.)
IS F/350/250_Navi_U
(L/O 0712)

Finish
OTHER FUNCTIONS
139
“Next” is displayed when multiple entries
are found for a searched name.
Up to 6 entries can be displayed including
the first searched one.
Do the following to change the entry to the
next one.
DTouch “Next”.
DPush the talk switch to say “Next Candi-
date”.
Calling without the voice recognition
After the entry number is displayed, you
can also call by pushing the telephone
switch or touching “Dial”.
Cancelling the voice recognition
The voice recognition will be cancelled
when you do the following.
DKeep on pushing the talk switch.
DPushof the steering wheel.
DTouch “Cancel”. (Except for recogniz-
ing the command.)
DSay “Cancel”. DIALING BY PHONE NUMBER
You can call by giving a desired num-
ber.
You: Push the talk switch.
System: “After the beep, please say the
number.”
You: “812387.”
System: “When ready, please briefly push the talk switch or push the
off−hook switch to dial.”
You: Push the talk switch.
System: “After the beep, please continue to add numbers or
say “Dial”.”
You: “Dial.”
System: “Dialing the number.”
Now you can call 812387.
IS F/350/250_Navi_U
(L/O 0712)

Finish
OTHER FUNCTIONS
141
When a call is received, this screen is
displayed with a sound. Touch
or
push
of the steering wheel to talk on
the phone.
To hang up the phone:
Touch
or pushof the steering
wheel again.
To refuse to receive the call: Touch
and hold it.
To adjust the volume of received call: Touch
“–”or“+”or use the volume
switch of the steering wheel.
On the international phone call, the other
party’s name may not be displayed cor-
rectly depending on the cellular phone
which you have.
While you are talking on the phone, this
screen is displayed. You can do the op-
eration below on the screen.
To adjust the volume of the other party’s
voice: Touch
“–”or“+”or use the volume
switch of the steering wheel.
To hang up the phone: Touch
or pushof the steering
wheel.
To mute your voice: Touch “Mute” .
To input a Key: Touch “0−9”.
To transfer the call Touch “Transfer Call” .
You cannot change from Hands −free call
to cellular phone call while driving.
When you change from cellular phone call
to Hands −free call, the Hands −free screen
will be displayed and you can operate it on
the screen.
Transferring method and behavior are dif-
ferent depending on the cellular phone
which you have.
For the operation of the phone, see the
manual that comes with your cellular
phone.
IS F/350/250_Navi_U
(L/O 0712)
— Receive on the
Bluetooth rphone — Talk on the Bluetooth
r
phone