2008 INFINITI QX56 audio

AV-162
< PRECAUTION >[AUDIO SYSTEM]
PRECAUTIONS
5. When the repair work is completed, return the ignition switch to the
″LOCK ″ position before connecting
the battery cables. (At this time, the steering lock mechanism will engage.)
6. Perform a self-diagnosis check of a ll control units using CONSULT-III.
Revision: March 2010 2008 QX56

AV
PREPARATIONAV-163
< PREPARATION > [AUDIO SYSTEM]
C
D
E
F
G H
I
J
K L
M B A
O P
PREPARATION
PREPARATION
Commercial Service ToolsINFOID:0000000001601490
Tool name Description
Power tool Loosening bolts and nuts
PBIC0191E
Revision: March 2010
2008 QX56

AV-164
< ON-VEHICLE REPAIR >[AUDIO SYSTEM]
AV CONTROL UNIT
ON-VEHICLE REPAIR
AV CONTROL UNIT
Removal and InstallationINFOID:0000000001601491
CAUTION:
1. Cluster lid C
2. AV switch 3. AV control unit
4. AV control unit brackets 5. Tuner knob switch 6. AC and AV switch assembly
7. Volume knob switch 8. Volume knob9. Temp knobs RH and LH
10. Enter button 11. Tuner knob
ALNIA0201ZZ
Revision: March 2010 2008 QX56

AV
AV CONTROL UNITAV-165
< ON-VEHICLE REPAIR > [AUDIO SYSTEM]
C
D
E
F
G H
I
J
K L
M B A
O P
Only remove and replace the A/C or AV switch assembly knobs if damaged or missing. The knobs
must not be removed from the switches when removi ng and installing the A/C or AV switch assembly
to prevent damage to the switch assembly.
REMOVAL
1. Disconnect the battery negative terminal.
2. Remove the cluster lid C. Refer to IP-15, "
Removal and Installation".
3. Remove the AV control unit screws, using a power tool.
4. Remove the AV control unit.
5. Remove the A/C and AV switch assembly screws, t hen remove the A/C and AV switch assembles as nec-
essary.
INSTALLATION
Installation is in the reverse order of removal.
Revision: March 2010 2008 QX56

AV-166
< ON-VEHICLE REPAIR >[AUDIO SYSTEM]
DISPLAY UNIT
DISPLAY UNIT
Removal and InstallationINFOID:0000000001601492
REMOVAL
1. Remove cluster lid C. Refer to
IP-15, "Removal and Installation".
2. Remove the display unit screws (A), pull out the display unit (1) from instrument panel, to disconnect the display unit connectors.
3. Remove the A/C auto amp. screws (A) and the A/C auto amp. (1).
• Display unit (2)
4. Remove the display unit bracket screws and the display unit brackets.
INSTALLATION
Installation is in the reverse order of removal.
ALNIA0272ZZ
ALIIA0063ZZ
Revision: March 2010 2008 QX56

AV
FRONT TWEETERAV-167
< ON-VEHICLE REPAIR > [AUDIO SYSTEM]
C
D
E
F
G H
I
J
K L
M B A
O P
FRONT TWEETER
Removal and InstallationINFOID:0000000001601493
REMOVAL
CAUTION:
Use a suitable tool to prevent damage to the tweet er speaker grille trim and the instrument panel.
1. Remove front tweeter speaker grille.
2. Remove the front tweeter clips (C103) (A).
3. Disconnect the front tweeter connector.
4. Remove the front tweeter (1).
INSTALLATION
Installation is in the reverse order of removal.
ALNIA0202ZZ
Revision: March 2010 2008 QX56

AV-168
< ON-VEHICLE REPAIR >[AUDIO SYSTEM]
CENTER SPEAKER
CENTER SPEAKER
Removal and InstallationINFOID:0000000001601611
REMOVAL
CAUTION:
Use a suitable tool to prevent
damage to the center speaker grille and the instrument panel.
1. Using a suitable tool, remove the center speaker grille finisher (1).
2. Disconnect the center speaker connector (A).
3. Remove the center speaker screws (B).
4. Remove the center speaker (2).
INSTALLATION
Installation is in the reverse order of removal.
ALNIA0275ZZ
Revision: March 2010 2008 QX56

AV
FRONT DOOR SPEAKERAV-169
< ON-VEHICLE REPAIR > [AUDIO SYSTEM]
C
D
E
F
G H
I
J
K L
M B A
O P
FRONT DOOR SPEAKER
Removal and InstallationINFOID:0000000001601494
REMOVAL
1. Remove the front door finisher. Refer to INT-11, "Removal and Installation".
2. Remove the front door speaker screws.
3. Disconnect the front door speaker connector.
4. Remove the front door speaker.
INSTALLATION
Installation is in the reverse order of removal.
WKIA1498E
Revision: March 2010 2008 QX56