2008 GREAT WALL FLORID belt

Downloaded from www.Manualslib.com manuals search engine 263Vehicle Body
6. Remove the seat belt retractor upper mounting bolt
(hexagon bolt for flange face).
7. Remove the seat belt retractor lower mounting bolt.
Front seat belt installation
1. Install the seat belt vertical adjuster.
(a) Tighten the seat belt vertical adjuster mounting bolts.
(b) Conduct torque calibration on the seat belt vertical ad-
juster mounting bolts.
Seat belt vertical adjuster mounting bolt torque is
45±5 N·m.
2. Install the B-pillar upper trim panel.
3. Install the retractor lower mounting bolt.
Tighten the seat belt retractor lower mounting bolt. Seat belt
retractor lower mounting bolt torque is 45±5 N·m.
4. Install the retractor upper mounting bolt.
Tighten the seat belt retractor upper mounting bolt (hexagon
bolt for flange face). Seat belt retractor upper mounting bolt
torque is 9±3 N·m.
2. Remove the seat belt lower mounting bolt and B-pillar
lower decoration board.
3. Remove the guide ring cover.
Remove the seat belt guide ring cover, and expose the seat
belt upper set mounting bolt.
4. Remove the seat belt guide ring.
Remove the seat belt upper mounting bolt and B-pillar upper
decoration board, and expose the seat belt vertical adjuster.
5. Remove the vertical adjuster.
Remove the seat belt vertical adjuster mounting bolts one by
one from bottom to top.
Retractor upper mounting bolt
Retractor lower mounting bolt
Adjuster upper mounting bolt
Adjuster lower mounting bolt
Retractor upper mounting bolt
Retractor lower mounting bolt
Seat belt upper mounting bolt
Adjuster upper
mounting bolt
Adjuster lower mounting bolt

Downloaded from www.Manualslib.com manuals search engine GWFLORID Maintenance Manual264
Rear three-point seat belt removal
1. Remove the seat belt lower mounting bolt.
2. Remove the C-pillar protector.
3. Remove the guide ring cover.
Remove the seat belt guide ring cover, and expose the seat
belt guide ring mounting bolt (refer to front seat removal
methods for details).
4. Remove the seat belt guide ring mounting bolt and re-
tractor lower mounting bolt.
Rear three-point seat belt installation
1. Install the retractor.
Tighten the seat belt retractor lower mounting bolt. Seat belt
retractor lower mounting bolt torque is 45±5 N·m.
2. Install the guide ring.
Tighten the seat belt guide ring mounting bolt. Guide ring
mounting bolt torque is 45± 5 N·m.
6. Install the B-pillar lower trim panel.
7. Install the seat belt retaining end piece.
Fix the seat belt lower mounting bolt on the floor of the ve-
hicle body. Seat belt lower mounting bolt torque is 45±5 N·m.
5. Install the seat belt guide ring.
Fix the seat belt upper mounting bolt onto the vertical ad-
juster. Seat belt upper mounting bolt torque is 45±5 N·m.Seat belt upper mounting bolt
Seat belt lower mounting bolt
Lower mounting bolt
Guide ring mounting bolt
Retractor lower mounting bolt
Guide ring mounting bolt
Retractor lower mounting bolt

Downloaded from www.Manualslib.com manuals search engine 265Vehicle Body
3. Install the C-pillar protector.
General Instructions and Operations of Seat Belt
Front seat belt warning:
The front seat belts are equipped with seat belt indicator. The driver seat belt indicator is located on the dash-
board and that of the front passenger is on the air conditioner panel. If the ignition switch is on but the front pas-
senger does not fasten the seatbelts, the indicator will turn on.
Preload three-point type belt retractor:
The front seat belts utilize preload three-point type belt retractors. The preload three-point type belt retractor is
loose, enabling the passenger to move freely unless there is an emergency, such as emergency braking, hard ac-
celeration, or hard turning.
Operation notice and function examination:
Areas of Importance
If the seat belt retractor is installed incorrectly, the seat belt will lose its function in the event of an accident, and
thus fail to protect the passenger!
Prevent sharp and harmful substances from touching the seat belt.
Avoid winding or breaking the seat belt lock tongue and seat belt lock bu\
tton.
Do not bleach or dye the seat belt woren band. Wash it with neutral liquid soap and water only.
Before installing the seat belt mounting bolt, manually tighten the seat\
belt bolts to avoid improper clipping.
Do not repair the seat belt retractor or seat belt lock button. If the seat belt is broken, the seat belt assembly must
be replaced.
Change the broken or damaged seat belt.
Function examination:
1. Check whether all the seat belt mounting bolts are tightened.
2. Check the seat belt lock button. The lock button should be unlocked and able to lock easily.
3. After locking the seat belt, the seat belt lock tongue can no longer loo\
sen.
4. Pull all the seat belts out. Seat belts cannot have knots or tears.
5. The belt should retract smoothly but not roughly.
Warning:
Different metals making direct contact will accelerate corrosion. Make sure to use the correct fastening
piece to avoid premature corrosion!
4. Install the seat belt lower mounting bolt.
Lower mounting bolt
Side sheet metal
C-pillar protector

Downloaded from www.Manualslib.com manuals search engine GWFLORID Maintenance Manual266
Front seat removal and installation
Removal
1. Disconnect the seat belt terminal harness (seat bottom).
2. Remove the rear foundation hoods 1 & 2 and mounting
bolts 3 & 4.
3. Remove the front foundation hoods 1 & 2 and mounting
bolts 1 & 2.
4. Remove the seat.
Installation
Special Note: Different metals making direct contact
will accelerate corrosion. Make sure to use the correct
fastening piece to avoid premature corrosion.
1. Install the seat.
2. Connect the seat belt terminal harness.
3. Tighten the rear foundation bolt and install the rear
foundation hood.
4. Tighten the front foundation bolt and install the front
foundation hood.
Remarks: Front seats are symmetrical.
Seats
Components
Areas of Importance
1. Pay attention to safety in the process of removal, transportation, and installation, as to avoid
scratching or crushing injury caused by the seat.
2. Take note to protect the inner decorative components in the process of installation and transporta-
tion, as to avoid scratching the side panels.
3. After finishing installation, make sure to calibrate the tightening torq\
ue of mounting bolts.
Rear seat
Front passenger seat
Driver seat
Backrest regulating lever
Rear foundation hood 1
Rear foundation hood 2
Front foundation hood 1
Front foundation hood 2
Mounting bolt 1Mounting bolt 2
Mounting bolt 4Mounting bolt 3