Component ViewFloor gear shift lever handle
Gear shift lever shield
Floor storage box# 1 gear shift cable retainerE ClipE ClipControl
box holeControl box
decoration cover
Control box
rear part12.0
Floor gear shift
lever assembly Clip
Speed changer control cable
Snap Clip
WasherWasher
Clip Clip5.0Clip
Shift BracketShift Bracket12.0Transmission ControlIntroduction of Transmission Control4-2Nm : Specified torque: Non-reusable parts -
Audio System -Audio System Replacement5-53V. Rear loudspeaker assembly1. Remove rear loudspeaker shelf
2. Remove rear loudspeaker assembly
a. Disconnect connector
b. Remove three tapping screws and loudspeaker assemblyVI. Remove antenna conductor (Retractable antenna)1. Remove vehicle ceiling internal decorations
2. Remove A column decorative board
3. Disconnect connector
4. Remove instrument desk
5. Remove wire clip and antenna conductorVII. Multi-disc Exchanger1. Remove left trunk internal decorations
2. Disconnect connector
3. Remove four bolts and exvhanger
Item
Temperature regulation method
CompressorNominal refrigerating capacity / w
Displacement / (ml /r)
Model
Power consumed by magnetic clutch /W
Lubricating oil / ml
BlowerMaximum air quantity / (m3/h)
Air regulation
Motor power / W
Dimension /mm
Heat exchange quantity / W
Fan motor current / A
Fan motor revolution / (r/min)
Dimension /mm
Refrigerating capacity /W
Thermostatic expansion valve Condenser
Evaporator
Driving belt
Refrigerant filling amount/gChapter 7 Air Conditioning SystemSection 1 General InformationOverview:Air-conditioning system consists of refrigeration and heating parts. Refrigerating system mainly consists of
compressor, condenser and evaporator etc, it adsorbs heat in the air through circulation of refrigerant, so as to
reduce air temperature in car body and eliminate water vapour in air, to achieve the purpose of temperature drop
and dehumidification. Heating system mainly consists of heat exchanger and heater unit. It utilizes heat of engine
cooling water to heat air via heat exchanger, so as to achieve the purpose of heating. Regulation and control of
temperature, humidity and flow rate of air in car body is realized via heating and refrigeration systems separately
or jointly.
For parameters of refrigerating system, see the table:
Parameter
Control mixing of cool and warm air
4200
143 131
SEBX13 FM10S13
43
300001202/150ml cm3 420
Manual 4 speed
200
16 x 350 x 630
10000
8
2200
225 x 250 x 58
4000
Internal balance type 1. 5 tons of refrigeration
4PK820
440±20g 420±10g+20
05-72Air Conditioning System -
General Information
