2008 FORD C MAX check engine

Downloaded from www.Manualslib.com manuals search engine CHANGING A BULB
WARNINGS
On vehicles fitted with Xenonheadlamps, have the headlampbulbs changed by an expert. Thereis a risk of injury due to high voltage.
During operation, the bulbs andtheir surroundings get hot.Switch off the lights and let the bulbscool down before replacing them.
Always switch off lights and ignitionbefore replacing any bulb.
Never touch the glass of the bulbs.Fit only bulbs having a UV filter.Always replace a faulty bulb with anew one of the same type. Afterreplacing a bulb, check that the lightsoperate correctly.
Headlamps, side lamps,direction indicators
Note:It is necessary to remove theheadlamp assembly to remove anyof the bulbs.
Removing the headlampassembly
Open the bonnet.
Remove the screw.
WARNING
When re-installing the lampassembly, make sure that thewiring connectors and retaining clipsare engaged properly.
Press down the retaining clips at therear of the lamp assembly using ascrewdriver and carefully pull out thelamp assembly.
74
LightingE78106 E78107

Downloaded from www.Manualslib.com manuals search engine Brake lamp P21 wattA
Direction indicator PY21 watt(orange)B
Reversing lamp P21 wattC
Rear fog lamp/tail lampP21/4 WattD
Note:Vehicles may not have a taillamp if an LED board is fitted. TheLED board is not a serviceable item,please consult your dealer if this fails.
Turn the bulb anticlockwise underslight pressure and remove it.Replace the bulb.
Install in the reverse order. Afterinstallation, check that the lightsoperate correctly.
Central brake lamp
Consult an expert.
Number plate lamp
5 watt festoon
Loosen the two screws, and removethe lamp assembly.
Install in the reverse order.
Interior and reading lamps
Switch off the lights.
Insert a flat-bladed screwdriver intothe recess between the body of theunit and the lens at the opposite sideto the switches. Gently prise out thelens a short way. Take hold of theside of the lens and lift it off the unit.
81
LightingE78126 E72556 E7812812

Downloaded from www.Manualslib.com manuals search engine The electric windows will stopautomatically while closing andreverse some distance if there is anobstacle in the way.
Overriding the anti-trapfunction
CAUTION
While you close the window forthe third time, the anti-trapfunction is disabled. Make sure thereare no obstacles in the way of theclosing window.
To override this protection functionwhen there is a resistance, e.g. in thewinter, proceed as follows:
1.Close the window twice until itreaches the resistance and let itreverse.
2.Close the window a third time tothe resistance. The anti-trapfunction is disabled and youcannot close the windowautomatically. The window willoverride the resistance and youcan close it fully.
3.If the window does not close afterthe third attempt, have it checkedby an expert.
Resetting the memory of
the electric windows
WARNING
The anti-trap function isdeactivated until you have resetthe memory.
After the battery has beendisconnected from the vehicle youmust reset the memory separatelyfor each window:
1.Lift and hold the switch until thewindow is fully closed.
2.Release the switch.
3.Lift the switch again for one moresecond.
4.Push and hold the switch until thewindow is fully open.
5.Release the switch.
6.Lift and hold the switch until thewindow is fully closed.
7.Open the window and try to closeit automatically.
8.Reset and repeat procedure if thewindow does not closeautomatically.
EXTERIOR MIRRORS
Convex mirrors
85
Windows and mirrorsE71042

Downloaded from www.Manualslib.com manuals search engine Engine coolant temperaturegauge
All vehicles
Shows the temperature of the enginecoolant. At normal operatingtemperature, the needle will remainin the centre section.
CAUTION
Do not restart the engine until thecause of overheating has beenresolved.
If the needle enters the red section,the engine is overheating. Stop theengine, switch the ignition off anddetermine the cause once theengine has cooled down. SeeEngine coolant check (page 201).
Fuel gauge
The arrow adjacent to the fuel pumpsymbol indicates on which side of thevehicle the fuel filler cap is located.
WARNING LAMPS AND
INDICATORS
The following warning lamps andindicators illuminate when the ignitionis switched on:
•Airbag
•Oil pressure
•Engine immobiliser
•ABS
•Stability control (ESP)
•Engine
•Doors open
•Brake system
•Engine systems fault
•Frost
•Power steering
•Ignition
If a warning lamp or indicator doesnot illuminate when the ignition isswitched on, it indicates amalfunction. Have the systemchecked by an expert.
ABS warning lamp
If the ABS warning lampilluminates when driving, itindicates a malfunction.Have this checked by an expert.Normal braking (without ABS) will bemaintained.
Airbag warning lamp
If the warning lamp does notilluminate, if it stays on orilluminates intermittently orcontinuously while driving, it meansthere is a malfunction. Have thesystem checked by an expert.
Brake system warning lamp
WARNING
If it illuminates after releasing theparking brake or when driving,have the braking system checked byan expert immediately.
90
Instruments

Downloaded from www.Manualslib.com manuals search engine The brake system warninglamp remains illuminatedwhen the parking brake isengaged. It will also illuminate if thebrake fluid level falls below the MINmark.
Brake system and ABSwarning lamps
WARNING
Reduce vehicle speed gradually.Use the brakes with great care.Do not step on the brake pedalabruptly.
If both warning lamps illuminate atthe same time when driving, stopthe vehicle as soon as it is safe todo so. Have the braking systemchecked by an expert beforecontinuing your journey.
Cruise control indicator
The indicator in theinstrument cluster willilluminate when the systemis in use.
Direction indicator
A sudden increase in therate of flashing warns of afailed indicator bulb.
Doors open warning lamp
Illuminates when the ignitionis switched on and remainson if any door, the bonnet orthe luggage compartment is notclosed properly.
Engine systems faultwarning lamp
Illuminates to indicate amalfunction of the engineand powertrain relatedsystems. Stop the vehicle as soon assafely possible and switch off theengine immediately. Have the enginechecked by an expert immediately.
Engine warning lamp
If it illuminates with theengine running, it indicatesa malfunction. If it flasheswhen driving, reduce the vehiclespeed immediately. If it continues toflash, avoid heavy acceleration andhigh engine speed. Have your vehiclechecked by an expert immediately.
Front fog lamp indicator
The indicator will illuminatewhen the front fog lampsare in use.
91
Instruments E71340

Downloaded from www.Manualslib.com manuals search engine Oil pressure warning lamp
WARNING
Do not resume the journey if theoil level is correct. Have theengine checked by an expert.
If it stays on after starting orilluminates during a journey,stop immediately, switch offthe engine and check the engine oillevel. Top up straight away if the levelis low.
Power steering warninglamp
Illuminates to indicate amalfunction of the powersteering system. Fullsteering will be maintained but youwill need to exert greater force onthe steering wheel. Have the systemchecked by an expert as soon aspossible.
Rear fog lamp indicator
The indicator in theinstrument cluster willilluminate when the rear foglamps are switched on.
Seat belt reminder
WARNINGS
The seat belt reminder remainsin stand-by mode after thedriver has fastened his/her seat belt.It will be reactivated if the driverunbuckles his/her seat belt.
WARNINGS
Never sit on top of a buckledseat belt to avoid the seat beltreminder. The restraint system canonly work properly if passengershave buckled up their seat belts.
When the vehicle’s speedexceeds 23 km/h (14 mph),the seat belt reminder willilluminate if the driver’s seat belt isunbuckled. The seat belt reminderwill not go out until the driver hasfastened his/her seat belt.
To deactivate the seat belt reminderfor one ignition cycle, the driver mustbuckle and unbuckle the seat beltwithin 3 seconds with the ignitionswitched on.
Stability control (ESP)indicator
Note:If the indicator does notilluminate when the ignition isswitched on or if it stays illuminatedwhilst driving, it indicates amalfunction.
Illuminates when stabilitycontrol is switched off andflashes when stability control(ESP) is activated.
93
Instruments

Downloaded from www.Manualslib.com manuals search engine SystemWarninglampMessage
Key free system.-Close boot or use spare key
Lighting
SystemWarninglampMessage
Brake lamp switch. Thevehicle can be driven asnormal. However, cruisecontrol cannot be switchedon. Have the system checkedby an expert as soon aspossible.
redBrake light fault
Adaptive front lighting system(AFS).amberAdaptive front light failure
Maintenance
SystemWarninglampMessage
Cooling system.redHigh engine temperature
Brakes.redLow brake fluid level
Engine. Stop the vehicle assoon as safely possible andswitch off the engine immedi-ately. Have the enginechecked by an expert imme-diately.
redEngine malfunction
104
Information displays

Downloaded from www.Manualslib.com manuals search engine SystemWarninglampMessage
Electronic acceleration control(EAC). The vehicle can bedriven but the accelerationrate will be noticeablyreduced. Maximum vehiclespeed will be maintained.Have the system checked byan expert as soon as possible.
redAcceleration reduced
Screen washer.amberLow washer fluid level
Service Indication-Service oil
Power steering
SystemWarninglampMessage
Power steering. Full steeringwill be maintained but you willneed to exert greater forceon the steering wheel. Havethe system checked by anexpert as soon as possible.
amberPower steering malfunction
Transmission
SystemWarninglampMessage
Under certain driving condi-tions it is possible that theclutches in the transmissioncan overheat. In thesecircumstances it is necessaryto press the brake pedal and
redTransm. overt. Press brake
stop the vehicle to preventdamage to the transmission.
105
Information displays