7
If the ECOfunction is on, the reconfig-
urable multifunction display will show
E(Economy) next to the gear engaged
fig. 5.
IMPORTANT If after 10 seconds (with ig-
nition key to MAR) the display does not
show the gear engaged, turn the ignition
key to STOPand wait for the display to
turn off, then repeat system switch on. If
the fault persists, contact Fiat Dealership.STARTING THE ENGINE
The engine can be started either with a
gear engaged or in neutral (N), always
press the brake pedal first.
After starting:
❒the gearbox sets to neutral (N) auto-
matically
❒lever A-fig. 1keeps the same position
it had before starting
❒the reconfigurable multifunction display
shows (N) and a buzzer will indicate if
the lever position and the gear engaged
are not matching
❒gears that can be engaged are: 1st, 2nd
or reverse (R) gear.IMPORTANT When trying to start the
engine with gearbox not in neutral (any
gearshift lever position other than N) and
without pressing the brake pedal, the re-
configurable multifunction display will
show a dedicated message (see paragraph
“Warning lights and messages”). In this
event, to start the engine just repeat op-
eration keeping the brake pedal pressed.
IMPORTANT When the driver’s door is
opened, the system starts the hydraulic
part to prepare it for when the engine is
started.
fig. 6F0H1243g
If the engine fails to start
with the gear engaged, the
driver is informed of the potentially
dangerous situation due to the fact
that the gearbox is in neutral by the
buzzer.
WARNING
603.83.871 IDEA LOGIC 1a GB 17-01-2008 11:24 Pagina 7
11
AUTOMATIC METHOD
UNAVAILABLE (amber)
The message on the multifunc-
tion display comes on when, with
engine on, the AUTOmode cannot be
selected.CLUTCH
OVERTEMPERAT. -
SEE HANDBOOK
(amber)
The message on the multifunction display
comes on together with the buzzer to in-
dicate clutch overheating.
In this event, reduce gears and stop the
car (turning the engine off) until regular
operating conditions are restored.DEPRESS BRAKE
PEDAL - DELAYED
IGNITION (amber)
Messages are displayed in turns
and in sequence on the multifunction dis-
play, together with the buzzer to indicate
brake pedal failure when trying to start the
engine.
IMPORTANT Messages are displayed on-
ly if at startup a gear other than neutral
(N) is engaged. If the warning light continues
to stay on (together with the
message on the multifunc-
tion display), contact Fiat
Dealership.
If the warning light continues
to stay on (together with the
message on the multifunc-
tion display), contact Fiat
Dealership.
To safeguard clutch efficien-
cy do not use the accelerator
to keep the car still (e.g.:
when the car is parked facing
uphill) since clutch overheating could
damage it. Use the brake pedal and
press the accelerator pedal only when
deciding to move off.
If the warning light continues
to stay on (together with the
message on the multifunc-
tion display), contact Fiat
Dealership.
èèè
603.83.871 IDEA LOGIC 1a GB 17-01-2008 11:24 Pagina 11
