2008 DODGE SPRINTER oil capacities

322 OperationEngine compartment
4
Mechanical elements and the lubricants
used for them must be carefully
matched.
For this reason, only brands tested and
approved by the manufacturer should be
used. Please contact your Sprinter Deal-
er to obtain the necessary information.
No lubricant additives should be used.
The use of such additives could affect
your warranty rights. Information is
available from any authorized Sprinter
Dealer.For specifications of engine oils, coolant
and brake fluid, see "Service products
and capacities" (
\2
page 604) and con-
tact your authorized Sprinter Dealer.The vehicle consumes a maximum of
1 US qt (1.0 l) oil per 620 miles
(1000 km), depending on your driving
style.
Engine oil consumption may even be
higher if:
\4
the vehicle is new
\4
you mainly operate the vehicle under
arduous operating conditions
\4
you often drive at high engine
speeds
The engine oil consumption can only be
judged after a lengthy distance has been
covered.
Service products
Warning
G
If handled incorrectly, service products
can constitute a health risk for people and
an environmental hazard.
Always observe relevant guidelines for
handling, storing and disposing of service
products.
Engine oil
nf_BA.book Page 322 Friday, January 25, 2008 3:53 PM

328 OperationEngine compartment
4
3
Engine oil dipstick
\1
Check the engine oil level.
The oil level is correct if the oil is be-
tween the lower
min
and upper
max

marks on the dipstick.
\1
Add engine oil if necessary
(\2
page 328).
Adding engine oilFor specifications of engine oils see
"Service products and capacities"
(\2
page 604).
\1
Unscrew the cap on engine oil filler
neck
1
.
Make sure that you only fill the en-
gine oil as far as the upper
max

mark.
\1
Unscrew the cap on filler neck
1
. N18.00-2041-31
!
CAUTION
Have any excess engine oil drained
or siphoned off at an authorized
Sprinter Dealer. Otherwise, the en-
gine or catalytic converter could be
damaged.
The alternator is underneath the en-
gine oil filler neck. For this reason,
add the engine oil carefully. There is
a risk of damage to the alternator
from engine oil dripping down.
nf_BA.book Page 328 Friday, January 25, 2008 3:53 PM

330 OperationEngine compartment
4
\1
Slowly unscrew cap
1
counter-
clockwise to reduce excess pres-
sure.
\1
Continue turning the cap and remove
it.
\1
Add coolant as far as the MAX mark.
\1
Twist cap
1
back on.
For coolant specifications, see "Service
products and capacities" (
\2
page 604).
Warning
G
When opening the coolant expansion tank
there is a risk of scalding from hot coolant
spraying out. The cooling system and the
coolant expansion tank are pressurized
when the engine is at normal operating
temperature.
Wear gloves and eye protection. Only
open the coolant expansion tank when
the coolant temperature is less than
122 °F (50 °C).
Warning
G
Coolant contains glycol and is therefore
toxic. Do not swallow coolant. Consult a
doctor immediately if any coolant is swal-
lowed.
Do not allow coolant to come into contact
with your skin, eyes or clothing. In the
event of contact with the eyes, rinse them
thoroughly with clean water. Clean skin
and clothes immediately with soap and
water. Change out of soiled clothing with-
out delay.
!
CAUTION
Check the cooling and heating sys-
tems regularly for leaks. If a large
quantity of coolant is lost, have the
cause traced and rectified at an au-
thorized Sprinter Dealer.
nf_BA.book Page 330 Friday, January 25, 2008 3:53 PM

333 Operation
Engine compartment
4
For specifications of brake fluid, see
"Service products and capacities"
(\2
page 616).The windshield washer reservoir is in the
engine compartment. It holds approx.
7.4 US qt (7.0 l).
On vehicles with a headlamp cleaning
system, this is also supplied from the
windshield washer reservoir.
1Coolant tank cap
2Brake fluid reservoir cap
3Windshield washer reservoir capAdd windshield washer fluid concentrate
to the water all year round.
Warning
G
If the boiling point of the brake fluid is too
low, vapor pockets may form in the brake
system when the brakes are applied hard
(e.g. when driving on long downhill
stretches). This has a detrimental effect
on braking efficiency, which could in-
crease the stopping distance. This in-
creases the risk of an accident.
Have the brake fluid replaced every
two years.
Windshield washer system/
headlamp cleaning system*
N20.30-2063-31
nf_BA.book Page 333 Friday, January 25, 2008 3:53 PM

410 OperationMaintenance and servicing
4
Mechanical elements and the lubricants
used for them must be carefully
matched.
For this reason, only brands tested and
approved by the manufacturer should be
used. Please contact your Sprinter Deal-
er to obtain the necessary information.
No lubricant additives should be used.
The use of such additives could affect
your warranty rights. Information is
available from any authorized Sprinter
Dealer.For specifications of engine oils, coolant
and brake fluid, see "Service products
and capacities" (
\2
page 604) and con-
tact your authorized Sprinter Dealer.
Observe the information on spare parts
in the “Technical data” section
(
\2
page 600).
Warning (Continued)
G
The manufacturer recommends that you
use an authorized Sprinter Dealer for this
purpose. In particular, work relevant to
safety or on safety-related systems must
be carried out at an authorized Sprinter
Dealer.
Service products
Warning
G
If handled incorrectly, service products
can constitute a health risk for people and
an environmental hazard.
Always observe relevant guidelines for
handling, storing and disposing of service
products.
nf_BA.book Page 410 Friday, January 25, 2008 3:53 PM

604 *Technical dataService products and capacities
6
\3 Service products and capacitiesService products are:\4
fuels
\4
lubricants (e.g. engine oils, transmis-
sion oils, hydraulic fluids, greases)
\4
antifreeze additives, coolant
\4
brake fluid
Service products are tested for suitabili-
ty in our assemblies. Approved service
products meet the highest quality stan-
dards and are listed in the
Mercedes-
Benz Specifications for Service Pro-
ducts
. For this reason, only use service
products that have been approved for
your vehicle. This is an important condi-
tion for warranty claims to be upheld. In-formation about approved service
products is available from all authorized
Sprinter Dealers.
You will find details about windshield
washer fluid in the “Operation” section
(
\2
page 333).
It is neither necessary nor permissible to
mix special additives with approved ser-
vice products (except for approved fuel
additives). Therefore, special additives
must not be mixed with fuels or lubri-
cants. The properties of the service
products could be adversely affected by
special additives and result in damage to
the assemblies.The vehicle operator is responsible at all
times for any use of special additives.
The use of special additives may result in
a limitation or an invalidation of your
warranty entitlement.
nf_BA.book Page 604 Friday, January 25, 2008 3:53 PM

606 *Technical dataService products and capacities
6
Warning (Continued)
G
Change out of clothing soiled with service
products immediately to avoid the risk of
fire and other injuries.Fire, naked flames and smoking are there-
fore prohibited when handling service
products due to their highly flammable
nature.Keep service products out of the reach of
children.You must observe the notes on danger
concerning the risk of poisoning, acid
burns and fire on the service product con-
tainers.
Environmental note
H
Dispose of service products in an environ-
mentally responsible manner.Engine oils!
CAUTION
Engine oils are labeled on the contai-
ner with various ACEA (Association
des Constructeurs Européens d’Au-
tomobiles) and/or API (American Pe-
troleum Institute) designations of
quality.
Chrysler Vans LLC recommends the
use of MB approved engine oils listed
in the Mercedes-Benz oil specificati-
on sheets MB 228.51, 229.3,
229.31, 229.5 and 229.51 which
also meet ACEA and/or API classifi-
cations listed on the following chart.
Only engine oils (including synthetic)
with any of the following classificati-
on grades, or combinations thereof,
are approved.
nf_BA.book Page 606 Friday, January 25, 2008 3:53 PM

607 *Technical data
Service products and capacities
6
Valid Mercedes-Benz oil specification
sheets:
Always refer to the following viscosity
chart for the proper viscosity grade
based on ambient temperature. Select
oil viscosity according to the lowest air
temperature expected before the next
oil change. This chart supersedes ALL previously
published viscosity charts.
For further information contact your au-
thorized Sprinter Dealer.Engine
MB sheet
Gasoline
M272
229.3, 229.31
229.5, 229.51
Diesel
OM642
228.51, 229.31,
229.51
The following oils have been
determined to meet the Chrysler Vans
LLC requirements as shown below:MB approved engine
oil
SAE
MB sheet
Castrol Syntec 5W-40
5W-40
229.3
Castrol Syntec 0W-30
European Formula
0W-30
229.5
Chevron Supreme
Synthetic Motor Oil
SAE 5W-40
5W-40
229.31
Fuchs Titan Cargo
Maxx SAE 10W-40
10W-
40
228.51
Fuchs Titan GT1 SAE
5W-30
5W-30
229.51
nf_BA.book Page 607 Friday, January 25, 2008 3:53 PM