Page 610 of 666

608 *Technical dataService products and capacities
6
Fuchs Titan Supersyn
Longlife SAE 5W-30
5W-30
229.3
229.5
Havoline Ultra S 5W-
30
5W-30
229.31
Havoline Ultra S 5W-
40
5W-40
229.31
High Star
5W-30
229.3
Lotos Economic SL/
CF
5W-30
229.3
Lotos Syntetic Auto
Diesel CF
5W-40
229.3
The following oils have been
determined to meet the Chrysler Vans
LLC requirements as shown below:MB approved engine
oil
SAE
MB sheet
Lotos Syntetic SL/SJ/
CF/CD
5W-40
229.3
Mobil 1 0W-40
0W-40
229.3
229.5
Mobil 1 5W-50
5W-50
229.3
Mobil 1 ESP Formula
MB
5W-40
229.51
Mopar Part No
68001334AA
5W-30
229.51
Pennzoil Platinum
Synthetic Ultra
Diesel
5W-30
229.51
The following oils have been
determined to meet the Chrysler Vans
LLC requirements as shown below:MB approved engine
oil
SAE
MB sheet
Pennzoil European
Formula Ultra
5W-30
229.5
Pennzoil Platinum Eu-
ropean Formula
5W-40
229.3
Pento High Perfor-
mance 5W-30 LA
5W-30
229.31
Pento High Perfor-
mance 5W-40
5W-40
229.3
Pento High Perfor-
mance 5W-40 LA
5W-40
229.31
Pentosin Diesel 10W-
40 LA
10W-
40
228.51
The following oils have been
determined to meet the Chrysler Vans
LLC requirements as shown below:MB approved engine
oil
SAE
MB sheet
nf_BA.book Page 608 Friday, January 25, 2008 3:53 PM
Page 611 of 666

609 *Technical data
Service products and capacities
6
Adding engine oil
Pentospeed
0W-30
229.3
Pentospeed 0W-30
VS*
0W-30
229.3
229.5
Q Diesel Plus
5W-30
229.51
Q European Engine
5W-40
229.3
Q European Engine Ul-
tra
5W-30
229.5
Quaker State Euro
Synthetic Ultra
Diesel
5W-30
229.51
Shell Helix Ultra AX
5W-30
229.51
The following oils have been
determined to meet the Chrysler Vans
LLC requirements as shown below:MB approved engine
oil
SAE
MB sheet
Shell Rimula Signia
10W-
40
228.51
Texaco Havoline Syn-
thetic Motor Oil SAE
5W-40
5W-40
229.31
Valvoline SynPower
MST
5W-30
229.51
The following oils have been
determined to meet the Chrysler Vans
LLC requirements as shown below:MB approved engine
oil
SAE
MB sheet
!
CAUTION
Diesel engine:
Never use any amount of engine oil
for the diesel engine that does not
conform to MB 228.51, 229.31
or 229.51 specifications. Otherwise
the diesel particle filter (DPF) could
be damaged.
If the above specified engine oils are
not available, you may also use engi-
ne oils conforming to MB 228.5,
229.3 and 229.5 specifications. You
should add no more than 1 qt (1 l) of
these engine oils, however.
nf_BA.book Page 609 Friday, January 25, 2008 3:53 PM
Page 613 of 666

611 *Technical data
Service products and capacities
6
Fuel requirementsOnly use premium unleaded fuel:\4
The octane number (posted at the
pump) must be 91 min. It is an aver-
age of both the Research (R) octane
number and the Motor (M) octane
number: (R+M) / 2). This is also
known as the ANTI-KNOCK INDEX.
Unleaded gasoline containing oxygen-
ates such as ethanol, IPA, IBA and TBA
can be used provided the ratio of any
one of these oxygenates to gasoline
does not exceed 10%; MTBE not to
exceed 15%.The ratio of methanol to gasoline must
not exceed 3% plus additional cosol-
vents.
Using mixtures of ethanol and methanol
is not allowed. Gasohol, which contains
10% ethanol and 90% unleaded gasoline,
can be used.
These blends must also meet all other
fuel requirements, such as resistance to
spark knock, boiling range, vapor pres-
sure, etc. Do not exceed an engine speed
of 3000 rpm if the vehicle is loaded
with a light load, such as two persons
and no cargo.
Do not exceed
2/3 of maximum ac-
celerator pedal position if the vehicle
is fully loaded or operating in moun-
tainous terrain.
nf_BA.book Page 611 Friday, January 25, 2008 3:53 PM
Page 614 of 666

612 *Technical dataService products and capacities
6
Fuels for diesel engines Fuel requirements
Only use commercially available vehicu-
lar ULTRA-LOW SULFUR HIGHWAY DIE-
SEL FUEL (15 ppm SULFUR MAXIMUM).
Chrysler Vans LLC USA now approves
the use of B5 bio diesel (standard diesel
with a maximum of up to 5% Bio diesel
content) in the Sprinter vehicle CRD die-
sel engine.
Information on diesel quality can
normally be found on the fuel pump.
!
CAUTION
The following may lead to increased
wear or engine damage:
\4
Using gasoline that does not
meet the specifications men-
tioned above
\4
The use of non-approved special
additives
!
CAUTION
Marine diesel fuel, Bio diesel fuel,
heating oil or the like must not be
used.
Do not blend diesel fuel with marine
diesel fuel, Bio diesel fuel or heating
oil. The use of such non-approved fu-
els or blending diesel fuel may result
in malfunction or cause engine dam-
age. Damage or malfunctions result-
ing from poor fuel quality or from
blending specific fuel additives are
not covered by the Sprinter warranty.
nf_BA.book Page 612 Friday, January 25, 2008 3:53 PM
Page 619 of 666

617 *Technical data
Service products and capacities
6
BrakesUse brake fluid approved for Chrysler Vans LLC standard MB 331.0 and/or Chrysler Vans LLC material standard MS-9971, brake
fluid certified to DOT 4 Plus standards, that also maintains a minimum dry boiling point (ERBP) of 500 °F (260 °C), a minimum wet
boiling point (WERBP) of 356 °F (180 °C) and a maximum viscosity of 1500 mm
2/s, conforming to FMVSS 116 and ISO 4925.
Brake fluid
2 years
2
Intac B026E Dry boiling point: 500°F
(260°C)
Wet boiling point: 356°F
(180°C)
MOPAR
® MS-9971 Part No. 04549625AC or
equivalent
331.0
9971
1 Chrysler Vans LLC Material Standard-No.
2 Over the course of a brake fluid’s service life, its boiling point falls due to the continuous absorption of moisture from the atmosphere. If the boiling point
of the brake fluid is too low, vapor pockets may form in the brake system when the brakes are applied hard (e.g. when driving on long downhill stretches).
This has a detrimental effect on braking efficiency, which could increase the stopping distance. This increases the risk of an accident. Have the brake fluid
renewed every 2 years.
Service interval
Product name/product number
MB sheet
MS-No.
1
nf_BA.book Page 617 Friday, January 25, 2008 3:53 PM
Page 621 of 666
619 *Technical data
Service products and capacities
6
EngineEngine oil for gasoline engine
M272
1 year or 10,000
mi (16,000 km)
see “Engine oils” (page 350)
229.31, 229.3
229.51, 229.5
Engine oil for diesel engine
OM642
2 years or 10,000
mi (16,000 km)
See “Engine oils” (page 350)
228.51
229.31
229.51
1 Chrysler Vans LLC Material Standard-No.
2 Follow the interval, time or mileage, that occurs first.
Service interval
Product name/product number
MB sheet
MS-No.
1
nf_BA.book Page 619 Friday, January 25, 2008 3:53 PM
Page 622 of 666
620 *Technical dataService products and capacities
6
Service interval
Product name/product number
MB sheet
MS-No.
1
Power steeringPower steering, no fluid service required.Power steering fluid
—
Mobil ATF+4, Exxon Mobil Corporation, or equiv-
alent
236.3
9602
MOPAR
® Part No. 05013457AA, or equivalent
–
Rear axleGear oil
10 years or
180,000 mi
(288,000 km)
2
BP Energear Hyep DC 80W-90
Mobil Delvac Synthetic Gear Oil 75W-90
235.20
235.8
8985
MOPAR
® Part No. 04874469
3
–
1 Chrysler Vans LLC Material Standard-No.
2 Follow the interval, time or mileage, that occurs first.
3 Synthetic automotive gear lubricant without fricition modifier.nf_BA.book Page 620 Friday, January 25, 2008 3:53 PM
Page 623 of 666

621 *Technical data
Service products and capacities
6
CapacitiesVehicle
Engine with
oil filter
Tank
Cooling
system
Windshield washer /
headlamp cleaning
system
Engine oil
Capacity
Including
reserve fuel
Coolant
1
1 Whenever the coolant is replaced, a concentration of 50% by volume of corrosion inhibitor/antifreeze should be maintained. This provides antifreeze pro-
tection down to -34,6 °F (-37 °C). Do not exceed a concentration of 55% by volume (antifreeze protection down to approximately -49 °F (-45 °C)), as the
heat dissipation properties deteriorate at higher concentrations. Observe the Mercedes-Benz Specifications for Service Products, Sheet 325.
Water with MB windshield
washer fluid
2500 CRD, 3500 CRD
13.21 US qt.
(12.5 l)
25.0 US gal
(100 l)
2
2 Including a reserve of 5.3 US gal (20 l).
5.3 US gal
(20 l)
10.75 US qt.
(10.0 l)
approx. 7.40 US qt. (7.0 l)
2500, 3500
10.04 US qt.
(9.5 l)
25.0 US gal
(100 l)
2
5.3 US gal
(20 l)
7.40 US qt.
(7.0 l)
approx. 7.40 US qt. (7.0 l)
nf_BA.book Page 621 Friday, January 25, 2008 3:53 PM