2008 DODGE SPRINTER engine

615 *Technical data
Service products and capacities
6
Do not blend other specific fuel addi-
tives with diesel fuel except for fuel flow
improver. They only result in unneces-
sary cost, and may be harmful to the en-
gine operation.
Flow improversThe effectiveness of flow improvers can-
not be guaranteed with all fuels. Ob-
serve the mixing ratio and comply with
the handling instructions given from the
manufacturer.
Warning
G
Under no circumstances should gasoline
be mixed with diesel fuel.
Due to the high pressure and high temper-
ature in the injection system, there is a
risk of fire and explosion.In addition, there is a risk of engine damage.Always follow basic safety rules when
working with any combustible material.
nf_BA.book Page 615 Friday, January 25, 2008 3:53 PM

618 *Technical dataService products and capacities
6
Service interval
Product name/product number
MB sheet
MS-No.
1
Engine cooling system
Whenever the coolant is replaced, a concentration of 50% by volume of corrosion inhibitor/antifreeze should be maintained. This
provides antifreeze protection down to -34,6 °F (-37 °C).
Do not exceed a concentration of 55% by volume (antifreeze protection down to approximately -49 °F (-45 °C)), as the heat dissi-
pation properties deteriorate at higher concentrations.
Observe the Mercedes-Benz Specifications for Service Products, Sheet 325.Coolant, anticorrosion/
antifreeze fluid
1st interval:
15 years or
180,000 mi
(288,000 km)
2
Subsequent
intervals:
5 years or 90,000
mi (144,000 km)2
EURO Peak Coolant/Antifreeze
OLD WORLD INDUSTRIES
325.0
9769
Zerex G05, The Valvoline Company
325.0
Zerex G48, The Valvoline Company
325.0
Glysantin G05, BASF AG
MOPAR
® Part No. 05066386AA, or equivalent
325.0
nf_BA.book Page 618 Friday, January 25, 2008 3:53 PM

619 *Technical data
Service products and capacities
6
EngineEngine oil for gasoline engine
M272
1 year or 10,000
mi (16,000 km)
see “Engine oils” (page 350)
229.31, 229.3
229.51, 229.5
Engine oil for diesel engine
OM642
2 years or 10,000
mi (16,000 km)
See “Engine oils” (page 350)
228.51
229.31
229.51
1 Chrysler Vans LLC Material Standard-No.
2 Follow the interval, time or mileage, that occurs first.
Service interval
Product name/product number
MB sheet
MS-No.
1
nf_BA.book Page 619 Friday, January 25, 2008 3:53 PM

621 *Technical data
Service products and capacities
6
CapacitiesVehicle
Engine with
oil filter
Tank
Cooling
system
Windshield washer /
headlamp cleaning
system
Engine oil
Capacity
Including
reserve fuel
Coolant
1
1 Whenever the coolant is replaced, a concentration of 50% by volume of corrosion inhibitor/antifreeze should be maintained. This provides antifreeze pro-
tection down to -34,6 °F (-37 °C). Do not exceed a concentration of 55% by volume (antifreeze protection down to approximately -49 °F (-45 °C)), as the
heat dissipation properties deteriorate at higher concentrations. Observe the Mercedes-Benz Specifications for Service Products, Sheet 325.
Water with MB windshield
washer fluid
2500 CRD, 3500 CRD
13.21 US qt.
(12.5 l)
25.0 US gal
(100 l)
2
2 Including a reserve of 5.3 US gal (20 l).
5.3 US gal
(20 l)
10.75 US qt.
(10.0 l)
approx. 7.40 US qt. (7.0 l)
2500, 3500
10.04 US qt.
(9.5 l)
25.0 US gal
(100 l)
2
5.3 US gal
(20 l)
7.40 US qt.
(7.0 l)
approx. 7.40 US qt. (7.0 l)
nf_BA.book Page 621 Friday, January 25, 2008 3:53 PM

622 *Technical dataService products and capacities
6
The vehicle will use more fuel than usual
in the following conditions:\4
at very low temperatures
\4
in urban traffic
\4
on short trips
\4
when towing a trailer
\4
when driving with a heavy load
\4
in mountainous terrain
Fuel consumptionEnvironmental note
H
A vehicle’s CO
2 emissions and fuel con-
sumption depend on:
\4efficient use of fuel by the engine
\4the style of driving adopted
\4other non-technical factors such as
environmental influences or road con-
ditions
nf_BA.book Page 622 Friday, January 25, 2008 3:53 PM

632 *Technical dataVehicle identification labels
6
\3 Vehicle identification labels
Base of the driver’s seat
1Vehicle safety certification label
or
Incomplete vehicle safety certification la-
bel
iFor certain vehicles, vehicle data
cards are delivered with the vehicle.
These vehicle data cards contain all
the important details of your vehicle,
e.g. vehicle identification number,
engine number and subassembly
numbers together with the model
and optional equipment codes.
This data is required when ordering
parts and for questions of a technical
nature.
For reasons of security, card 1 must
not be kept in the vehicle. It contains
the key number required for obtain-
ing replacement keys.
Handing cards 2 and 3 to an autho-
rized Sprinter Dealer will simplify or-
der processing.
nf_BA.book Page 632 Friday, January 25, 2008 3:53 PM

633 *Technical data
Vehicle identification labels
6
The Vehicle Identification Number (VIN)
can be found:\4
on the vehicle or incomplete vehicle
safety certification label
\4
embossed on the engine compart-
ment rear bulk (
\2
page 379)
Example vehicle safety certification label
(U.S. vehicles)
Example incomplete vehicle safety certi-
fication label (U.S. vehicles)
2VINExample vehicle safety certification label
(Canada vehicles)
nf_BA.book Page 633 Friday, January 25, 2008 3:53 PM

634 *Technical dataVehicle identification labels
6
Example incomplete vehicle safety certi-
fication label (Canada vehicles)
2VINExample Engine Compartment
3VIN (embossed on the engine compart-
ment rear bulk)
4Engine number (engraved on gasoline en-
gine)
5Engine number (engraved on diesel en-
gine)
6Emission control information label and
engine oil warning label
1
7Emission control information label (gaso-
line engine) (\2page 380)1. Read and observe the diesel engine oil informa-
tion under “Engine oils” in the“Service pro-
ducts and capacities” section.
nf_BA.book Page 634 Friday, January 25, 2008 3:53 PM