2008 Citroen JUMPER Owner's Manual

RADIO Access to and exit from the menus.
Confirmation and storing of the choices from
the current menu.
Scrolling of the menus.
Selection of the letters (CD NAME).
Increasing or decreasing of an
equaliser band (EQ SET).
Selection of the choices from the current menu.
Switching from one band to another on the
equaliser (EQ SET).
SELECTING A STATION
Press the source SRC button
several times in succession and
select the radio.
Press the band BN button to
select a waveband: FM1, FM2,
FMt, MW, LW.
Briefly press one of the buttons
to carry out an automatic search
of the radio stations.
Press one of the buttons to carry
out a manual search of the radio
stations.
STORING A STATION Press one of the buttons for
more than 2 seconds to store the
frequency of the current station.
82
Audio equipment

Scroll the displaySelectDisplaySelectDisplaySelectDisplaySelectDisplayEnables you to…
IGN TIME20 MIN00 MIN
Set the audio equipment play time after turning the ignition key to the "STOP" position:- 20 MIN to play for 20 minutes,- 00 MIN to switch off immediately.Place the key in the "RUNNING" position to switch the audio equipment back on.
NO HICUTHICUT
ON
Select the dynamic reduction of the treble:- ON,- NO.
VOICE2221...OFFSelect the volume setting:- 1 to 66,- OFF to cut off the sound.
SVC OFFSVC ON
Select the automatic control of the volume in relat ion to the vehicle speed:- ON,- OFF.
CD NAMEXYZ23ABCSelect and programme the name of the CD, currently being played, on the display:- the name stored previously,- 8 dashes if it does not have a name.Use the 4 arrows to select letters then store using MENU.To clear the name, press and hold the "CLR"button.
If a CD has been inserted, this menu is displayed.
ouABCDEFG5MENU
_ _ _ _ _
_ _ _
83
4
IN-CAR TECHNOLOGY
Audio equipment

84
Audio equipment
Scroll the displaySelectDisplaySelectDisplaySelectDisplaySelectDisplayEnables you to…
SENS DXSENS LO
Set the sensitivity of automatic reception of the radio frequencies (tuner):- DX (high) for a search of all of the surrounding transmitters,- LO (low) for a search of the surrounding transmitters which have a strong signal.
MP3 DISP
If your vehicle is equipped with MP3, this menu is displayed
FILENAMETIMETAG INFODIR
Select the type of MP3 display for the currenttrack- FILENAME for the name of the track (file),- TIME for the time elapsed,- TAG INFO for the title of the album and the name of the artist,- DIR for the name of the directory (folder).
CD DISP
NAMESelect the type of display for the current CD:
- for the name attributed to the CD,
- TIME for the time elapsed since the beginning of
the track.TIME
REG OFFREG ON
Select the reception of local or regional programmes (different from one region to another):- ON for local programmes,- OFF for no programmes.

Scroll the
display

Select

Display

Select

Display

Select

Display

Select

Display

Enables you
to…
PRESET USER CLASSIC ROCK JAZZ Select pre-defined equaliser settings.
Select USER to set the equaliser manually then go
to
the EQ SET menu.
Bass and Treble adjustments are always possible.
EQ SET
EQ SET
If USER is
selected in
PRESET,
this
menu is
displayed. Programme the 7 bands of the equaliser manually.
To store the settings, press MENU.
85
4
IN-CAR TECHNOLOGY
Audio equipment

22
11
86
Audio equipment
CD
The MP3 format, an abbreviation of MPEG 1.2 & 2.5 Audio
Layer 3, is an audio compression standard which per mits the
recording of several tens of music files on a singl e disc.
MP3
In order to be able to play a recorded CDR or CDRW , when
recording it is preferable to select standards ISO 9660
level 1.2 or Joliet.
If the disc is recorded in another format, it may not be played
correctly.
It is recommended that the same recording standard is
always used for an individual disc, with as low a s peed as
possible (4x maximum) for optimum sound quality.
In the particular case of a multi-session CD, the Joliet
standard is recommended.
The audio equipment will only play files with the extension
".mp3" with a sampling rate of 22.05 KHz or 44.1 KH z.
No other type of file (.wma, .mp4, m3u...) can be p layed.
It is advisable to restrict file names to 20 chara cters without
using special characters (e.g.: " " ? ; ù) to avoid any playing
or displaying problems.
PLAYING A CD OR AN MP3 COMPILATION
Insert circular compact discs only.
Some anti-pirating systems, on original
discs or CDs copied using a personal
recorder, may cause faults which are no
reflection on the quality of the original player.
Insert a CD or an MP3 compilation in the player, p lay begins
automatically.
If the player already contains a disc,
press the source SRC button several
times in succession and select CD.
Press one of the buttons to select a
track on the CD.

INTRODUCTION
This equipment chiefly enables you to:
- connect your Bluetooth®
mobile telephone to your vehicle leaving your hand s free,
- play audio sources (mp3, wma, wav) from a port able player,
- use the voice commands.
HANDS-FREE SYSTEM
87
4
IN-CAR TECHNOLOGY
Introduction
KEY
Indicates that a maintained press is required to s
tart the action described.
Voice mode
Press the control to start the voice recognition, an audible signal confirms that the function has be en activated, do not speak until
you hear this signal.
For further information regarding the voice comman ds, say "Help" or refer to the tables at the end of this document.
Recommendations
If the battery is disconnected, the equipment can operate for a further 15 minutes
(approximately).
The buttons "F1, F2, NAV, SOS" on the equipment's control panel are not active.

88
Presentation
PRESENTATION
DISPLAY, USB SOCKET, CONTROLS

1 F2
OSOSESC
NMOK
NAVF1
SOSSOSMAINOK
OK
NAV F1 F2
SOSSOSMAINESC
PRESENTATION
Adjustment of the volume
of the functions:
hands-free, audio player,
voice announcements.
Pause/resume the file
being played
(portable player).
USB connection socket. Remove the plastic cover to

connect your portable player.
Displaying of the menus and directories of the fil
es being
played (portable player).
- Scrolling of the menu options.
- Selection of the fi les to be played (portable player). - Activation of the voice recognition.
- Interruption of the voice message in order
to issue a new voice command.
- Deactivation of the voice recognition.
- Interruption of the voice message.
- Exit from the main menu.
- Exit from a sub-menu and return to the
previous menu option.
- Exit without storing.
- Deactivation/reactivation of the microphone during a telephone
conversation.
- Confi rmation of the current menu option.
- Transfer of the telephone conversation
from the hands-free system to the mobile
telephone and vice versa.
- Declining of the incoming telephone call.
- Interruption of the current telephone call.
- Activation of the main menu.
- Confirmation of the current menu option. - Acceptance of the incoming call.
- Switching from one telephone
conversation to another.
- Repeat of the last voice message.
DESCRIPTION OF THE CONTROLS
4
IN-CAR TECHNOLOGY
Presentation