2008 Citroen C5 LAMP
[x] Cancel search: LAMPPage 69 of 240
73
II
T Y R E D E F L A T I O N D E T E C T I O N
Wheel not detected
T h e d e fl a t i o n d e t e c t i o n s y s t e m i s a d r i v i n g a i d , b u t w h i c h d o e s n o t a b s o l v e t h e d r i v e r f r o m t h e n e e d t o b e v i g i l a n t a n d r e s p o n s i b l e .
T h i s s y s t e m d o e s n o t d i s p e n s e w i t h t h e r e q u i r e m e n t t o c h e c k t h e t y r e s o n a r e g u l a r b a s i s ( s e e “ V e h i c l e i d e n t i fi c a t i o n ” ) , t o m a k e s u r e t h a t t h e v e h i c l e i s b e h a v i n g c o r r e c t l y a n d t o a v o i d p r e m a t u r e t y r e w e a r a r i s i n g f r o m d r i v i n g t o o f a s t e t c .
Do not forget to check the pres-sure in the spare wheel.
Any repair or replacement of a tyre on a wheel that is equipped with a sensor must be carried out by a CITROËN dealer.Any repair or replacement of a tyre on a wheel that is equippel tha
The system may suffer from temporary interference caused by radio transmissions on neighbouring frequencies.
Automatic detection:
A m e s s a g e i n d i c a t e s t o y o u w h i c h t y r e i s p u n c t u r e d .
Driver request detection:
T h e v e h i c l e o u t l i n e i n d i c a t e s t h e p u n c t u r e d t y r e ( s ) .
T h e m e s s a g e i s a c c o m p a n i e d b y the STOP w a r n i n g l a m p l i g h t i n g u p a n d a b e e p .
Puncture
Automatic detection:
A m e s s a g e i n d i c a t e s t o y o u w h i c h w h e e l i s n o t d e t e c t e d .
Driver request detection:
T h e v e h i c l e o u t l i n e i n d i c a t e s t h e w h e e l ( s ) w h i c h i s / a r e n o t d e t e c t e d .
Press on Check
Automatic detection
Press on Check
Automatic detection
Note: I f y o u h a v e fi t t e d a w h e e l / w h e e l s n o t e q u i p p e d w i t h t y r e d e fl a -tion detection (e.g. snow tyres), contact a CITROËN dealertion detection (e.g. snow tyres), (e.g. snow .
The message is accompanied by the SERVICE warning lamp lighting up and a beep.Contact a CITROËN dealer to have the faulty sensor(s) replaced.
Page 76 of 240
79
II
CDB
E L E C T R I C P A R K I N G B R A K E
9. M a k e s u r e t h a t y o u p o s i t i o n t h e s t r a p b a c k i n i t s l o c a t i o n C. If n o t , t h e a p p l i c a t i o n o f t h e p a r k - i n g b r a k e w i l l n o t b e p o s s i b l e . C o n t a c t a C I T R O Ë N d e a l e r . i n g b r a k e w i l l n o t b e p o s s i b l e . i n g b r a k e w i l l n o t b e p o s s i b l e .
10. R e fi t t h e r u b b e r m a t a t t h e b a s e o f t h e a r m r e s t .11. R e m o v e a n d s t o r e t h e b l o c k .
T h i s s t r a p c a n n o t a p p l y t h e p a r k - i n g b r a k e .
T o r e - e n g a g e t h e e l e c t r i c p a r k - i n g b r a k e ( o n c e t h e m a l f u n c - t i o n o r t h e fl a t b a t t e r y h a s b e e n r e s o l v e d ) , m a k e a l o n g p u l l o n t h e control lever A u n t i l t h e p a r k i n g b r a k e w a r n i n g l a m p ( ! ) fl a s h e s o n t h e i n s t r u m e n t p a n e l t h e n m a k e a s e c o n d l o n g p u l l u n t i l t h i s w a r n i n g l a m p r e m a i n s l i t p e r m a n e n t l y .
T h e t i m e f o r a p p l y i n g t h e b r a k e s u b s e q u e n t t o t h e e m e r g e n c y u n l o c k i n g w i l l b e l o n g e r .
W h i l e t h e p a r k i n g b r a k e h a s n o t b e e n r e - e n g a g e d ( f l a s h - i n g t h e n p e r m a n e n t l i g h t i n g o f w a r n i n g l a m p ( ! ) o n t h e i n s t r u - m e n t p a n e l ) , y o u m u s t k e e p t h e i g n i t i o n s w i t c h e d o f f t o a v o i d d a m a g i n g i t .
2. F e t c h t h e v e h i c l e b l o c k l o c a t e d in the boot.3. I m m o b i l i s e t h e v e h i c l e b y p l a c - i n g t h e b l o c k i n f r o n t o f o r b e h i n d o n e o f t h e r e a r w h e e l s .4. O p e n t h e l o w e r c o m p a r t m e n t o f t h e c e n t r a l a r m r e s t b y p u l l i n g u p w a r d s .5. E n s u r e t h a t t h e c u p - h o l d e r B is f o l d e d b a c k .6. R e m o v e t h e r u b b e r m a t c o v e r - i n g t h e b a s e o f t h e a r m r e s t .7. D i s e n g a g e t h e s t r a p f r o m i t s l o c a t i o n C.8. P u l l t h e s t r a p t o u n l o c k t h e b r a k e . A l o u d c l i c k c o n fi r m s t h a t t h e b r a k e i s u n l o c k e d .
Note: It is necessary to check that the parking brake warning lamp lights up on the instrument panel when the parking brake is applied.
Remark: Diagnostic socket in the armrest strengthener. Ensure t h a t y o u d o n o t a l l o w a n y d u s t y o r d a m p e l e m e n t s n e a r t h e d i a g n o s -tic socket D w h i c h i s e s s e n t i a l f o r t h e m a i n t e n a n c e o f y o u r v e h i c l e .
Page 89 of 240
92
III
A
Locking/unlocking from the inside
With the doors and the boot closed, pressing button A allows you to control the electric central locking and unlocking.
It is still possible to open the doors from the inside.
If one of the doors is open or not properly closed, central locking will not work.
A C C E S S
Anti-theft protection
On starting the vehicle, the system automatically locks the doors as soon as you reach approximately 10 km/h.
Note: If a door is opened, this will automatically lock itself again when the vehicle reaches approximately 10 km/h (6 mph).
Activation/Deactivation of the anti-intrusion protection
After switching on the ignition, make a long press on the central unlocking control until a message is displayed and a beep is heard.
Selection of doors / boot
After having selected “Plip action / Driver” in the “Vehicle parameters / Comfort” menu of the instrument panel screen.
Pressing the remote control unlocks the passenger door.
A 2nd successive press unlocks all of the doors and the boot.
If you decide to drive with the doors locked, remember that i n t h e e v e n t o f a n a c c i d e n t t h i s r e n d e r s a c c e s s m o r e d i f fi -cult for the emergency services.
The warning lamp associated with the control A signals 3 statuses: l t fl a s h e s w h e n t h e i g n i t i o n k e y is in the stop position or when the key is not detected and the doors are locked.
It lights up when the vehi-cle is locked with the ignition switched on.It goes out when the doors are not locked.
Note: Control A is inactive if the vehicle has been locked using the remote control or the key.
Page 96 of 240
99
III
A U T O M A T I C A I R C O N D I T I O N I N G
M O N O Z O N E
This button activates the recirculation of air in the passenger compart-ment.
Press button 8 to switch off the entry of air from outside. The warning lamp comes on.
Whilst retaining the other settings, this position allows the driver at any moment to exclude unpleasant smells or smoke/emissions coming from outside.
This mode should be cancelled as soon as possible to allow the redistribution of air in the pas-senger compartment.
8. Air recirculation – Entry of air from outsideRemarks:When starting from cold, in order to prevent unwanted cold a i r , t h e a i r fl o w w i l l i n c r e a s e o n l y gradually to its optimum level.
If you enter the vehicle after a fairly prolonged stop and the temperature inside the vehicle is far from comfortable, it serves no purpose to modify the tem-perature that is displayed as an attempt to go immediately to the desired comfort level. The system automatically uses all of its power to compensate the temperature gap as quickly as possible.Water arising from the conden-sation in the air conditioning drains out through a hole pro-vided for this purpose ; a pool of water may thus form under-neath the vehicle when station-ary.
Whatever the time of year, even in cool weather the air condition-ing is useful in removing humid-ity and misting. Avoid driving for too long with air conditioning deactivated.
Page 98 of 240
101
III
A U T O M A T I C A I R C O N D I T I O N I N G
D U A L - Z O N E
Operating the air conditioning sys-tem on “AUTO” guarantees good ventilation inside the cabin.Note: The value indicated on the display corresponds to a comfort level and not to a temperature in Celsius or Fahrenheit.
Manual mode
One or more functions can be adjusted manually, while still retain-ing the other functions in automatic mode.
Press on any of the buttons, except for temperature 2a and 2b. Lights Aon buttons “AUTO” go out.
Changing to manual mode may result in a decrease in comfort level (temperature, humidity, smell, misting) and is not advised for opti-mum comfort.
To return to “AUTO” mode, press on buttons 1a and 1b. Lights Acome on.
3a-3b. Adjusting the air distribution
Press but-ton 3a to change the driver's side air fl o w d i s t r i b u -tion.
-
T h e a i r fl o w l e v e l i s i n d i c a t e d b y t h e progressive lighting of the ventilator blades.
B y r e d u c i n g t h e a i r fl o w t o i t s m i n i -mum setting, the air conditioning system switches itself off (OFF).
To prevent misting and poor air qual-ity in the passenger compartment, take c a r e t o m a i n t a i n a s u f fi c i e n t fl o w o f a i r .
4 . A d j u s t i n g t h e a i r fl o w
T h e a i r fl o w c a n o n l y b e a d j u s t e d with the engine running.
T o a d j u s t t h e a i r fl o w , p r e s s b u t t o n :
t o i n c r e a s e t h e a i r fl o w
t o r e d u c e t h e a i r fl o w
5. Air conditioning
Air conditioning only works with the engine running. The air blower button (air fl o w a d j u s t m e n t ) m u s t be activated to obtain air conditioning.Press on button 6. The warning lamp comes on. T o f u n c t i o n e f fi c i e n t l y , air conditioning should be used with the windows closed.
This button activates the recirculation of air in the passenger compart-ment and can function automatically.
6. Air recirculation – Entry of air from outside
Press button 3b to change the p a s s e n g e r ' s s i d e a i r fl o w d i s t r i -bution.
The symbol (arrows) correspond-ing to the chosen distribution lights up:Windscreen and front windows.Front air vents (central, side and soft diffusion grille if open) and rear air vents.
Front and rear footwells.
Note: You cannot select distribu-tion to the windscreen/front win-dows and to the front/rear air vents at the same time.
-
Page 99 of 240
102
III
A U T O M A T I C A I R C O N D I T I O N I N G
D U A L - Z O N E
Switching off the entry of air
Press button 6 to switch off the entry of air from outside.
Whilst retaining the other settings, this position allows the driver at any moment to exclude unpleas-ant smells or smoke/emissions coming from outside.
This mode should be cancelled as soon as possible to allow the redistribution of air in the pas-senger compartment.
Entry of air from outside
Press once on button 6 to return to the original status (Entry of air from outside).
7. Rear demisting - deicing
Press button 7, with the engine running, to start a rapid deicing or demisting of the rear screen and rear view mirrors. The warning lamp comes on.
This mode automatically stops depending on the outside tempera-ture. It can be interrupted by a fur-ther press on button 7 or by stop-ping the engine.
In some cases, “AUTO” mode may not be suf- fi c i e n t t o d e m i s t o r defrost the windows (e.g. humidity, several passengers, frost).
Press button 8 for rapid clear win-dows. The warning lamp comes on. This system controls air con-ditioning, temperature and air fl o w / e n t r y . I t d i s t r i b u t e s v e n t i l a t i o n towards the windscreen and the front windows.
You can manually exit “Demisting” mode. This mode should be can-celled as soon as possible to allow the redistribution of air in the pas-senger compartment.
A press on either of the buttons 1aor 1b allows you to return to “AUTO” mode.
8. Front demisting - deicing
Remarks:
When starting from cold, in order to prevent unwanted cold a i r , t h e a i r fl o w w i l l i n c r e a s e o n l y gradually to its optimum level.
If you enter the vehicle after a fairly prolonged stop and the temperature inside the vehicle is far from comfortable, it serves no purpose to modify the tem-perature that is displayed as an attempt to go immediately to the desired comfort level. The sys-tem automatically uses all of its power to compensate the tem-perature gap as quickly as pos-sible.
Water arising from the conden-sation in the air conditioning drains out through a hole pro-vided for this purpose ; a pool of water may thus form under-neath the vehicle when station-ary.
Whatever the time of year, even in cool weather the air condition-ing is useful in removing humid-ity and misting. Avoid driving for too long with air conditioning deactivated.
Page 100 of 240
103
III2
5
1
3
4
6
7
8
9
With the engine off, programmable heating preheats the coolant cir-cuit in order to optimise the engine operating temperature prior to starting.
The programmable heating sys-tem can be started immediately or delayed thanks to its programming function.
Digital programmer
The heating system’s programmer is located on the right-hand side of the dashboard.
1. Time or remaining functioning time.
2. Increase (time).
3. Select programme.
4. Programme number selected.
5. Immediate start-up of heating.
6. Time adjustment and reading warning lamp.
7. Reduce (time).
8. Heating mode warning lamp.
9 Programmable heating system warning lamp.
LED lit : Activated.
LED off : Deactivated.
P R O G R A M M A B L E H E A T I N G
( D E P E N D I N G O N C O U N T R Y )
Immediate start-up
Press button 5.
The screen displays a default duration of 60 minutes, you are advised to adjust this to a duration of 30 minutes maximum (see section “ adjusting the operating duration ”). The warning lamp 8 lights up and remains lit for the whole duration of the system’s operation. The duration of the system’s operation disappears after 10 seconds.
Stopping the heating
Press button 5.
The warning lamp 8 and the screen go out.
With the engine idle or the vehicle stationary, it is nor-mal to hear a high-pitched whistling noise and to notice some smoke / emis-sions.
Page 102 of 240
105
III
34
2
3
8
76
Selection and activation of a programmed time
Press button 3 until the programme number corresponding to the required programmed time is dis-played. The chosen pre-selected time is automatically activated after 10 seconds if no other but-tons have been pressed.
T o c o n fi r m t h a t t h e m o d e i s a c t i -vated, symbols 4 and 8 fl a s h u n t i l the heating starts up.
When the heating starts up, the warning lamp 9 lights up on the dashboard and the programmer screen.
P R O G R A M M A B L E H E A T I N G
Adjusting the operating durationPress button 3 and hold it down. Press button 2 or 7 at the same time. Release button 3. The time and symbol 6 are displayed.Press again on button 3 and hold it down. Press button 2 or 7 at the same time. Release button 3. The operating duration and symbol 8 is displayed.Adjust the operating duration with button 2 or 7.
Note : The operating duration is memorised when the time indicated disappears or by pressing button 3.
Adjusting the remaining operating duration
When heating mode is activated, the remaining operating time can b e m o d i fi e d w i t h i n t h e r a n g e o f 1 0 to 60 minutes using buttons 2 or 7.
Note :The pre-selected start-up time c a n b e m o d i fi e d o r c a n c e l l e d b y following the instructions previ-ously given above.
In the event of a battery discon-nection, the programmer must be re-set (hours, minutes etc.)
Always switch off the additional heating when filling up with f u e l , t o p r e v e n t a n y r i s k o f fi r e or explosion.
To avoid any risk of intoxica-tion or asphyxiation, the addi-tional heating must not be used, even for short periods, in an enclosed area such as a garage or workshop not equipped with a system for the extraction of exhaust gases.
Do not park the vehicle over i n fl a m m a b l e m a t e r i a l s ( e . g . d r y grass, dead leaves or paper) as t h i s c o u l d p r e s e n t a fi r e r i s k .
The programmable heating sys-tem is supplied by the vehicle’s fuel tank. Before use, ensure that the remaining fuel level is s u f fi c i e n t . I f y o u a r e u s i n g t h e reserve fuel tank, we strongly advise you not to use the pro-grammable heating system.