123
III
33
44
1
1
22
The cargo net can be used behind the rear seats (row 2) when the l u g g a g e - c o v e r b l i n d i s n o t fi t t e d , o r behind the front seats (row 1).
Note : when using behind the front seats, the backrests and the seat cushions must be folded down (see section on rear seats).
CARGO NET (TOURER)
To install :
Fold down the backrests of the rear seats.
Position the cargo net roller over the two rails 1 located behind the rear seats (2/3 benchseat). The two notches 2 must be posi-tioned over the two rails.
Slide the 2 rails 1 into the notches 2 and push the roller (lengthwise) from right to left to lock it in.Put the backrests of the rear seats back into place.
To use in row 1 :
Fold down the backrests of the rear seats.
Open the cov-ers 3 of the corresponding h i g h fi x i n g l o c a t i o n s .
To use in row 2 :
Open the cov-ers 4 of the c o r r e s p o n d - i n g h i g h fi x i n g locations.
From the rear benchseat, unroll the cargo net by pushing it to disengage the retaining notches.
Position one of the ends of the cargo net’s metal bar in the corre- s p o n d i n g fi x i n g l o c a t i o n . E n s u r e that the notch is correctly lodged in the rail located inside the loca-tion 4.
Position the other notch in the 2 n d fi x i n g l o c a t i o n a n d p u l l t h e metal bar towards you.
Unroll the cargo net and posi-tion one of the ends of the net’s metal bars in the corresponding fi x i n g l o c a t i o n . E n s u r e t h a t t h e notch is correctly lodged in the rail located inside the location 3.
Pull on the cargo’s net’s metal bar to position the other notch in t h e 2 n d fi x i n g l o c a t i o n .
