2008 Citroen C5 Owner's Manual

132
IV
Display and selection of a station available in the area in which you are travelling
Briefl y press on button G or but-ton 9 at the steering wheel to dis-play the list of stations. This list is updated every 10 minutes.
You can also update this list at any time by making a long press on button G or button 9 at the steer-ing wheel.
To listen to one of these stations, select by pressing buttons J or Mand validate using button L.
Manual pre-setting
Select the waveband and memory bank required using button E.
Select a station using either auto-matic or manual search.
Keep pressing for more than two seconds on one of the pre-selection buttons 1 to 6 on the keypad P.
The sound momentarily cuts off, then returns to its previous level to confi rm that it has memorised the station.
R A D I O S O U R C E
Automatic memorisation of transmitters (Autostore function)
In FM, if you hold down button Efor more than two seconds, your radio will automatically memorise the 6 strongest stations on the FM3 memory bank.
The display shows “FM AST”.
The radio memorises the 6 strong-est transmitters, deleting the 6 pre-viously memorised.
After the memorisation, the radio goes directly to memory 1 of mem-ory bank FM3.Note:If the traffi c information func-tion has been activated (see RDS SYSTEM), the stations offering this facility will be mem-orised as priority.
If it is unable to memorise any new stations, the system will retain the previously memo-rised stations.If the system is unable to fi nd 6 stations, the unfi lled memory slots will remain free.

133
IV
Using the RDS (radio data system) function on FM
The majority of FM radio stations use the RDS system. The radio in your vehicle has this system.
The RDS system enables these stations to transmit non-audible data in addition to the broadcasting of their programmes. The data pro-vides access to various functions described in this chapter, such as: display of the station name, inter-mittent traffi c information fl ashes or automatic scanning of stations. This enables you to continue lis-tening to your chosen radio station, regardless of the different frequen-cies it uses in the regions through which you are travelling.
Scanning of RDS stations
Your radio keeps the best possible reception by continuously looking for any other frequencies on which the selected radio station is broad-cast, automatically choosing the frequency offering the best recep-tion (if the station broadcasts on more than one transmitter or fre-quency).
R D S S Y S T E M
Activation/deactivation of the RDS functions
The RDS functions can be accessed via the following two menus:Main menu (press button O).
AUDIO menu (press button L).
To activate/deactivate the RDS functions
1. Press on button O.2. Select the AUDIO icon using buttons J or M.3. Confi rm your choice with a press on button L.4. Select the sub-menu for the FM waveband, via buttons J or M. Confi rm your choice with a press on button L.5. Select scanning for RDS sta-tions, via buttons J or M.6. Validate your choice with a press on button L.7. Using control L, select/deselect to activate/deactivate the func-tion.8. Validate your choice by select-ing “OK” on the display.

134
IV
Regional search mode
Some stations, when they are organised in networks, broadcast regional programmes at certain times of day, and national pro-grammes at other times.
It is possible to search.Either for a regional station only.
Or across the whole network in order to fi nd a different pro-gramme.
To activate/deactivate this function, proceed as for Scanning of RDS stations.Note: When this mode is activated, the system will remain tuned to one specifi c regional station.
TA traffi c information (traffi c announcements)
Some stations allow broadcast-ing, only in FM, of these messages thanks to the “TA” function.
You can activate the “TA” func-tion by pressing on button I. This allows you, even though you are listening to another audio source or to a radio programme not itself providing traffi c messages, to receive traffi c information fl ashes from an FM station which broad-casts them.

135
IV
Selecting CD source
After inserting a CD, with the printed side facing upwards, the player will start playing the CD automatically.
To change manually to CD source (CD already inserted), press but-ton D until you obtain the source you require.
Ejecting a CD
Press button B to eject the CD, the audio system will automatically switch to radio source.
If the CD is not removed within 10 to 15 seconds of being ejected, it will automatically be taken back into the CD player, although it will not be played.
Selecting a track
Press button K once to play the next track.
Press button N once to return to the beginning of the track currently being played, press a second time to go back to the start of the previ-ous track.
Press the buttons successively to skip several tracks at a time.
You can also perform this opera-tion using button G or button 9 at the steering wheel.
When the track listing is displayed, select the desired track using but-tons J or M then validate with but-ton L.
C D S O U R C E
You can also do this via the con-trols 7 and 8 at the steering wheel.
Fast forward and rapid reverse with accelerated sound
To move swiftly through the CD, press and keep pressed button Kor N, respectively for fast forward or rapid reverse with accelerated sound.
You can also do this via the con-trols 7 and 8 at the steering wheel.
Play resumes as normal when the button is released.
Menu
This menu allows activation/deac-tivation of two options:Playback of the fi rst 7 seconds (approx.) of each track of the CD.
Random playback of the CD tracks.
This can be accessed in two ways:Either by pressing button Oand proceeding as for Scan-ning of RDS stations – the sub-menu for Audio Preferences.
Or, provided you are in CD source, by pressing on but-ton L. You can then access the Audio menu.
Note: If one of these options is active, it remains active for CD changer source.

136
IV
MP3 CDs
The MP3 format (MPEG 1,2 & 2,5 Audio Layer 3) is an audio com-pression standard that permits recording of 10 times as many musical fi les on one CD.
Your radio only plays back fi les which have the extension “.mp3”. Other types of fi les (.wav, .mpg4, .ogg, midi...) cannot be played back.
When you insert an MP3 CD, the radio searches all the musical tracks. Playback may require some tens of seconds before starting.
Playback of the MP3 CD is opti-mised if the level of the cover is limited to 2.
Burning format
Some burnt CDs cannot be read by your equipment (quality, speed of recording, etc.).
When you burn a CD-R or CD-RW, select the burning standard ISO 9660 level 1.2 or Joliet. Playback of other formats may not occur cor-rectly.
Use the Joliet standard to burn multi-session CDs.
On a given CD, always use the same burning standard.
To obtain the best possible acous-tic quality, select the lowest burn-ing speed.
It can handle transmission speeds of 8 to 320 kbits/s and playback of 22.05 to 44.1 kHz.
M P 3 C D S O U R C E
MP3 CD player
Your Audio CD system may be MP3 compatible.
As you insert a CD recorded in MP3 format, playback starts of the fi rst song of the fi rst CD-cover.
You can select a particular track by using buttons N or K and CD-cov-ers using buttons J or M.
To select a track
To display the list of CD-covers, press on button G.
Use buttons J or M to select the CD-cover you wish to listen to.
To open a CD-cover, press L.
Use buttons N or K to select the track you wish to listen to.
Validate with a press on L.
Menu
This menu is for activation/deacti-vation of three options:
Playback of the fi rst 7 seconds (approx.) of each track of the CD.
Repetition of the current CD-cover.
Random playback of CD-cover tracks by CD-cover.
This can be accessed in two ways:
Either by pressing button Oand proceeding as for Scan-ning of RDS stations – the sub-menu for Audio Preferences.
Or, provided you are in CD source, by pressing on but-ton L. You can then access the Audio menu.

137
IV
CD Changer
This equipment S (if present) is located in the vehicle boot and comprises a magazine that holds up to 6 CDs.
To insert/remove a CD1. Remove the magazine from the CD changerOpen the fl ap located on the right-hand side of the boot to access the CD changer.
Press on the “EJECT” button to eject the magazine partially.
Remove the magazine carefully.Close the sliding door.
2. Removing a compartmentTake out just one drawer at a time.3. Inserting/removing a CDInsert a single CD, printed side upwards. Otherwise the CD changer will not operate.
Pull out the CD by pulling on the part that is showing.4. Repositioning the compartmentRefi t the drawer by pushing it into the magazine. Do not push directly on the CD.
5. Repositioning the magazineOpen the sliding door.
Hold the magazine, narrow side towards the opening of the CD changer.
Push the magazine gently into the aperture of the changer until there is a click.
Reclose the sliding door to prevent entry of dust or of foreign bodies.
Close the fl ap.

138
IV
B L U E T O O T H®
Note:Refer to the user instruc-tions to familiarise yourself with the features of twinning.The telephone detects the Bluetooth®The telephone detects the The telephone detects the system on your ®
vehicle. “CITROËN system on your system on your vehicle. “vehicle. “” displays on your telephone.
You should then select “CITROËN” on your telephone controls. Next you have to accept or decline this twinning.Note: If the 4 twinning memories are already being used, you must select a memory that is already attributed although the telephone twinned to this location will no longer be.
Next the telephone asks you to enter an identifi cation code: 1234.
Validate.Note: This entry may be demanded earlier in the twinning sequence.
The telephone is now twinned to your Bluetooth®telephone is telephone is system. For imme-®
diate access to the Bluetooth®imme-imme-
functions, it may be necessary to make a connection (see following page Confi guration : Connecting a twinned mobile telephone).a twinned mobile telephonea twinned mobile telephone
Once the twinning is fi nished, you will be able to connect your tele-phone via the “Main menuphone via the “phone via the “”.

139
IV
Main Menu
Press on the Menu button O to access to Main menu, then select the “Telephone” icon using but-tons J or M), then validate the selection via button L.
You have access:
To the Directory.
To Confi guration.
To Communication Manage-ment.
You access your choices via (Jor M), then you validate them with a press on L.
This main menu can also be accessed by pressing button Ethen button L.
Folder
This menu lets you open:
The telephone Directory of the telephone that is connected.
The Calls List.
Telephone directory
A telephone call can be made independently of the telephone or of the audio system, thanks to the directory.
The directory is displayed. Select the number via J or M, then vali-date with a press on L.