2008 Citroen C4 steering

9
F A M I L I A R I S A T I O N
DASHBOARD
1. Steering lock and ignition switch.
2. Controls:

10
F A M I L I A R I S A T I O N
FIXED CENTRED CONTROLS STEERING WHEEL
Controls for speed limiter and cruise control Audio system controls
Function controls:
Multifunction display controls- Display lighting rheostat
- Voice recognition
- Air recirculation
- Telephone
- Personal button

11
F A M I L I A R I S A T I O N
Controls for speed limiter and cruise control Audio system controls See "Audio" or your Navidrive instructions
Selection of speed limiter or cruise control
Activation of speed limiter and Deactivation/Reactivation of cruise control and speed limiter
Search for higher radio frequencies
Scrolling of memorised stations
Decrease speed/Activate cruise control
Increase speed/Activate cruise control
Increase sound volume Reduce sound volume
Mute
FIXED CENTRED CONTROLS STEERING WHEEL

12
F A M I L I A R I S A T I O N
Display lighting rheostat
Starting voice recognition
(See "Audio" or your Navidrive instructions)Access to "Main menu"*Scrolling in the multifunction display
Telephone pick-elephone pick-elephone pick-up/hang-up
(See "Audio" or your Navidrive instructions)
Personal button:
- Black panel (default function), or
- Interior lamp on/off, or
- Log of alerts, or
- Status of functions
Give a long press on this button to display the personalisation menu.
Selection of the type of in-formation displayed on the right of the screen (radio, trip computer, navigation/guidance…) and for screen A, choice of activation/deac-tivation of your functions and choice of your adjustments
Cancel the current operation or return to the previous screen
Air recirculation
Validation of the function selected or the value modifi ed
Pick up/hang up
(See "Audio" or your Navigation instructions)
* In compliance with national legislation, in some coun-tries the "menu" control is deactivated when driving.
Display the "Directory" menu
(See "Audio" or your Navidrive instructions)
FIXED CENTRED CONTROLS STEERING WHEEL

14
F A M I L I A R I S A T I O N
SITTING COMFORTABLY
1. Unlock the steering column using the lever.
2. Adjust the position of the steering wheel for height and reach.
3. Lock the steering column with the lever.
Manual adjustment of steering wheel height and reach
 56
Front seat belt
1. Locking.
 87
Adjustment of front head restraints
Adjustment of rear head restraints
 53
Height and angle.
A. Low position.
B. High position.
A. Height adjustment (5-door)
B. Holding the seat belt (3-door)
 50

21
F A M I L I A R I S A T I O N
DRIVING
6-speed Electronic Gearbox System
Automatic mode
Neutral
Do not select this position, even momentarily, when the vehicle is moving.
Sport setting
Reverse
Using the lever
Push the lever forwards to change up.
Pull the lever backwards to change down.
Using the control paddles behind the steering wheel
Press the "+" or "-" control paddle be-hind the steering wheel for an immedi-ate gear change up or down respec-tively.
Under heavy acceleration, a higher gear will only be engaged if the driver operates the gear lever or the controls on the steering wheel.
 100
Manual mode
OrThe gearbox operates in auto-active mode without input on your part.

28
I
D A S H B O A R D
Functioning if the service interval is exceeded
Each time the ignition is switched on, the maintenance symbol and the extra mileage travelled (with a minus in front) will fl ash.
For example: the preset service dis-tance has been exceeded by 300 km. Your vehicle must be serviced as soon as possible.
A few seconds after you have swit-ched on the ignition, the total mi-leage recorder returns to its normal operation and the maintenance symbol remains illuminated.
Resetting the mileage indicator to zero
Your CITROËN dealer performs this operation after each service. Howe-ver, if you carry out the servicing yourself, the procedure for resetting to zero is as follows:
- Switch off the ignition, then place the key on position S, steering lock.
- Press control 1 and keep it pressed.
- Switch on the ignition.
- Keep control 1 pressed until the zero appears and the maintenance symbol disappears.
- Switch off the ignition.
Maintenance intervals
If your vehicle is used in particularly harsh conditions, it is necessary to select the maintenance schedules for "special operating conditions" (see the Maintenance Guide) which consist of more frequent services.

28
I
D A S H B O A R D
Functioning if the service interval is exceeded
Each time the ignition is switched on, the maintenance symbol and the extra mileage travelled (with a minus in front) will fl ash.
For example: the preset service dis-tance has been exceeded by 300 km. Your vehicle must be serviced as soon as possible.
A few seconds after you have swit-ched on the ignition, the total mi-leage recorder returns to its normal operation and the maintenance symbol remains illuminated.
Resetting the mileage indicator to zero
Your CITROËN dealer performs this operation after each service. Howe-ver, if you carry out the servicing yourself, the procedure for resetting to zero is as follows:
- Switch off the ignition, then place the key on position S, steering lock.
- Press control 1 and keep it pressed.
- Switch on the ignition.
- Keep control 1 pressed until the zero appears and the maintenance symbol disappears.
- Switch off the ignition.
Maintenance intervals
If your vehicle is used in particularly harsh conditions, it is necessary to select the maintenance schedules for "special operating conditions" (see the Maintenance Guide) which consist of more frequent services.