59
IV
A C C E S S
Guide-me-home lighting
A press on button C operates the guide-me-home lighting (illumination of the sidelamps and dipped beams for approx. one minute).
A second press prior to the end of this timing cancels the guide-me-home lighting.
Locating of the vehicle
To locate the vehicle in a carpark, press button A, the interior lamps come on and the direction indicators fl a s h f o r a f e w s e c o n d s . T h e v e h i c l e remains locked.
Folding and ejection of the key
Button D is for folding and ejecting the key from its housing in the remote control.
If you do not press on button D, you could damage the mechanism.
Except when reinitialising, the remote control cannot function while the key is in the ignition, even when switched off.
Warning: By inadvertently actioning the remote control, when for example it is in your pocket, you can unlock the vehicle without your realising it.
However, if no door is opened with 30 seconds of unloc king, the vehicle locks itself again automatically, without arming the alarm.
Warning: There a is a risk of damage if the replacement battery is not the correct one.
Only use batteries that are identical or equivalent to thos e approved by CITROËNOnly use batteries that are identical or equivalent to thoseOnly use batteries that are identical or equivalent to those.
Changing the remote control battery
Unclip the cover to gain access to the battery.
Battery: CR 0523: 3 V.
Re-initialisation of the remote control
After a change of battery, it is necessary to re-initialise the remote control. To do that, switch on the ignition and immediately action button A on your remote control to trigger the action desired. This may take some ten seco nds.
Do not throw away the old batteries. They should be retur ned to the CITROËN dealer or deposited in a recognised recycling facilityDo not throw away the old batteries. They should be retur ned Do not throw .
Take care not to place the remote control in contact with grease or dust, or leave it in the rain or in a damp environment.
A hard object also on the key ring, pressing on the key while it is in the ignition, can cause a malfunction.
59
IV
A C C E S S
Guide-me-home lighting
A press on button C operates the guide-me-home lighting (illumination of the sidelamps and dipped beams for approx. one minute).
A second press prior to the end of this timing cancels the guide-me-home lighting.
Locating of the vehicle
To locate the vehicle in a carpark, press button A, the interior lamps come on and the direction indicators fl a s h f o r a f e w s e c o n d s . T h e v e h i c l e remains locked.
Folding and ejection of the key
Button D is for folding and ejecting the key from its housing in the remote control.
If you do not press on button D, you could damage the mechanism.
Except when reinitialising, the remote control cannot function while the key is in the ignition, even when switched off.
Warning: By inadvertently actioning the remote control, when for example it is in your pocket, you can unlock the vehicle without your realising it.
However, if no door is opened with 30 seconds of unloc king, the vehicle locks itself again automatically, without arming the alarm.
Warning: There a is a risk of damage if the replacement battery is not the correct one.
Only use batteries that are identical or equivalent to thos e approved by CITROËNOnly use batteries that are identical or equivalent to thoseOnly use batteries that are identical or equivalent to those.
Changing the remote control battery
Unclip the cover to gain access to the battery.
Battery: CR 0523: 3 V.
Re-initialisation of the remote control
After a change of battery, it is necessary to re-initialise the remote control. To do that, switch on the ignition and immediately action button A on your remote control to trigger the action desired. This may take some ten seco nds.
Do not throw away the old batteries. They should be retur ned to the CITROËN dealer or deposited in a recognised recycling facilityDo not throw away the old batteries. They should be retur ned Do not throw .
Take care not to place the remote control in contact with grease or dust, or leave it in the rain or in a damp environment.
A hard object also on the key ring, pressing on the key while it is in the ignition, can cause a malfunction.
