Page 118 of 257
1 0 7
IX
D R I V I N G
Drive
The gearbox always selects the gear best adapted to the following parameters:
- s t y l e o f d r i v i n g ,
- r o u t e p r o fi l e ,
- v e h i c l e l o a d .
In this way the gearbox operates in autoadaptive mode, without the need for your intervention.
For certain manoeuvres (for example overtaking), it is possible to ob tain maximum acceleration by pressing hard down on the accelerator pedal, which may trigger automatic changedown to a lower gear.
Note
During braking, the gearbox may kick down automatically in order to offer an effective engine brake.
If you rapidly lift your foot off the accelerator, the gearbox will guard your safety by not changing up again.
Sequential forward drive
Selector position for manual gear changing.
- S e l e c t o r a t M.
- P u s h t h e s e l e c t o r t o w a r d s t h e s i g n "+" to change up a gear.
- P u l l t h e s e l e c t o r t o w a r d s t h e s i g n "-" to change down a gear.
Note: Passage from one gear to another is only possible when vehicle speed and engine speed permit.
The Sport and Snow programmes are not operative in sequential mode.
The change from position D (drive in automatic mode) to position M (drive in sequential mode) or vice versa may be effected at any time.
Page 121 of 257
1 1 0
IX
D R I V I N G
This driving assistance function allows you to drive at the speed of your choice without the need to action the accelerator.
This system is available above 4 0 k m / h ( 2 5 m p h ) , w i t h 4 t h g e a r or higher on a manual gearbox or 2 n d g e a r o r h i g h e r o n a n a u t o m a t i c gearbox.
Note: Information relating to the cruise control is displayed in zone A of the instrument panel.
To select the function
Turn control 1 to position "REG".
To select a cruising speed
At the time you select the function via the control 1, there is no cruise speed previously memorised:
Note: you can use successive presses to modify the cruise speed in steps of 1 mph and a continuous p r e s s t o j u m p i n s t e p s o f 5 m p h .
Accelerate to the desired speed, then press button 2 or button 4. The cruise speed will then be memorised and displayed in zone A on the instrument panel.
You can then release the accelerator pedal. The vehicle will automatically keep to that chosen speed.
Note: The vehicle speed may vary slightly from that memorised.
CRUISE CONTROL
Adjustment of the memorised speed while cruise control is in operation
To adjust the memorised speed, displayed in zone A, press on:
- b u t t o n 4 to increase the speed,
- b u t t o n 2 to decrease the speed.
To exceed the cruise speed temporarily
While cruise control is in use, it is always possible to go above the cruise speed simply by pressing the accelerator pedal (for example to overtake another vehicle). The speed displayed in zone A fl a s h e s .
You have only to release the accelator pedal to return to your cruise speed.
Note: if during cruise control the system cannot keep to the cruise speed (e.g. on a steep descent), t h e n t h e s p e e d fl a s h e s . I f n e c e s s a r y , brake to curb your speed.
Page 158 of 257
146
XI
P R A C T I C A L A D V I C E
Towing with all wheels on the ground
T o w i n g r i n g fi x i n g s a r e p l a c e d a t t h e f r o n t a n d a t t h e r e a r o f t h e v e h i c l e .
T o a c c e s s t h e m :
- a t t h e f r o n t : p u s h o n t h e l e f t t o t i l t t h e c o v e r , t h e n r e m o v e i t .
- a t t h e r e a r : p u s h a t b o t t o m , t h e n p u l l o n t o p .
T h e c o v e r r e m a i n s a t t a c h e d t o t h e b u m p e r b y m e a n s o f a t a b , s o t h a t i t c a n n o t b e c o m e l o s t .
The ignition key should be in position "M" so as to retain steering.
U s e a b a r w i t h h o o k s t o a t t a c h o n t h e t o w i n g r i n g s .
Vehicles with manual transmission
F o r v e h i c l e s w i t h m a n u a l t r a n s m i s s i o n , t h e g e a r l e v e r m u s t b e i n n e u t r a l . F a i l - u r e t o o b s e r v e t h i s r e q u i r e m e n t c a n l e a d t o t h e f a i l u r e o f c e r t a i n b r a k i n g c o m - p o n e n t s a n d a l a c k o f b r a k i n g a s s i s t a n c e o n r e s t a r t i n g t h e e n g i n e .
If the engine is not running, the steering and braking systems will not be power-assisted.
If towing another vehicle, the latter should be free-wheeling (that is, gearbox in neutral).
Page 163 of 257
151
XII
T E C H N I C A L S P E C I F I C A T I O N S
( 1 ) A f t e r a n o i l c h a n g e w i t h fi l t e r change
Engine typeEngine oil capacity in litres (1)
1.4i 16V - 65 kW3.15
1.6i 16V - 80 kW3.35
1.6i 16V - 88 kW-
1.6i 16V - 110 kW-
1.6i 16V - 103 kW-
HDi 66 kW (90 hp)3.85
HDi 80 kW (110 hp)3.85
HDi 100 kW (135 hp)5.3
HDi 103 kW (140 hp)5.3
CAPACITIES
BVM: Manual gearbox.
BVMP: (6 speed) Electronic Gearbox System.
BVA: Automatic gearbox.
FAP: D i e s e l p a r t i c u l a t e fi l t e r s y s t e m (DPFS).
"Michelin Energy Saver": tyres with very low rolling resistance.This tyre equipment contributes to the protection of the environment and the reduction of your vehicle’s fuel consumption.
BioFlex: A v e h i c l e fi t t e d w i t h a B i o F l e x engine can operate equally on unleaded petrol (95/98) or on bioethanol (See "Fuel").
Observe your vehicle’s towing limits.
It is essential to comply with the max. Gross Trailer Weights and speed l i m i t s a s s p e c i fi e d b y l e g i s l a t i o n i n each country. For further information about the towing capacity of your vehicle and its max. authorised Gross Train Weight, contact your CITROËN dealer.Gross Train Weight, Gross Train
ENGINE TABLES LEGEND
Page:
< prev 1-8 9-16 17-24