2008 Citroen C4 DAG engine
[x] Cancel search: enginePage 42 of 257
43
III
C O M F O R T
A i r fl o w t o t h e f a c e l e v e l vents.
T h e h e a t i n g / v e n t i l a t i o n a n d m a n u a l air conditioning systems can only function with the engine running.
1 - A d j u s t m e n t o f t h e a i r d i s t r i b u t i o n
D e m i s t i n g - D e f r o s t i n g .
F l o w t o t h e w i n d s c r e e n a n d f r o n t s i d e w i n d o w s .
D i s t r i b u t i o n t o t h e w i n d - s c r e e n , s i d e w i n d o w s a n d f o o t w e l l s .
F l o w t o f r o n t a n d r e a r p a s s e n g e r f o o t w e l l s .
H E A T I N G / V E N T I L A T I O N
Distribution from the air blower can be altered at will by placing the dis-tributor 1 in an intermediate posi-tion.
MANUAL AIR CONDITIONING
2 - Air recirculation
3 - H e a t e r b l o w e r c o n t r o l
The air blower operates only when the engine is running. For optimum comfort in the passenger compart-ment, the control should not remain in position 0 (position 1 m i n i m u m).
4 - T e m p e r a t u r e c o n t r o l
This position is for exclud-ing disagreeable odours or emissions coming from outside the cabin. With a press on control 2, the entry of air from outside is closed off, the lamp comes on. This should be cancelled as soon as possible to prevent mist-ing and to allow fresh air into the cabin.
To deactivate air recirculation, press again on control 2, the warning lamp goes out.
Page 43 of 257
44 III
C O M F O R T
6 - A i r c o n d i t i o n i n g
The air conditioning will only operate when the engine is running.
5 - R e a r s c r e e n d e m i s t i n g
Can only be operated with the engine running.
D e m i s t i n g - d e i c i n g o f t h e w i n d s c r e e n a n d f r o n t s i d e w i n d o w s
One press on control 5 acti-vates the electric demist-ing of the rear screen and, according to version, the exterior rear view mirrors. The warn-ing lamp comes on.
It switches off automatically to avoid excessive consumption of power.
One press stops the demisting.
A further press starts it again.
Note: If the engine is stopped before the end of demisting, the latter will resume the next time the engine is started.
Press on control 6. The warning lamp comes on.
For air conditioning, the air blower control 3 must not be on position "0".
Air conditioning is obtained by mix-ing the warm air with refrigerated air. The control for the blown air temperature 4 adjusts the air con-ditioning provided the control 6 is operational.
- Place the controls for temperature a n d a i r fl o w o n m a x i m u m .
- Close the central air vents.
- Operate the air conditioning by pressing the control 6, the warn-ing lamp comes on.
Note: you should not be in air recir-culation.
Page 45 of 257
46 III
C O M F O R T
Notes:
- When you enter the vehicle, the temperature inside the vehicle may be much colder (or warmer) than a comfortable temperature. It is no use modifying the dis-played temperature to try to attain the desired level of comfort. The system automatically strives to compensate this temperature dis-crepancy as rapidly as possible.
- When starting the engine from cold, in order to avoid distributing too much cold air, the blower will attain its optimum level gradually.
M a n u a l r e c a l l i n g o f o n e o r m o r e f u n c t i o n s
All the functions 4, 6 and 7 can be adjusted manually.
Display of the function "AUTO" then disappears.
C e n t r a l a n d l a t e r a l a i r vents.
C e n t r a l a n d l a t e r a l a i r v e n t s a n d p a s s e n g e r f o o t w e l l s .
P a s s e n g e r f o o t w e l l s .
T h e w i n d s c r e e n , f r o n t s i d e w i n d o w s a n d p a s s e n g e r f o o t w e l l s .
T h e w i n d s c r e e n a n d f r o n t s i d e w i n d o w s .
4 - A i r c o n d i t i o n i n g 6 - A d j u s t m e n t o f t h e a i r d i s t r i b u t i o n
5 - Air recirculation
To stop the air conditioning, press on the control 4. The symbol " A / C " disappears.
To restart it, press again on the control 4. The symbol " A / C " dis-plays.
When you press on control 5, the entry of air from out-side is blocked off and the associated symbol is dis-played.
This function can also be accessed by pressing the appropriate button on the steering wheel.
While retaining the other settings, this position excludes disagreeable odours or emissions coming from outside. It should be cancelled as soon as possible to prevent misting and to allow fresh air into the cabin.
To deactivate the air recirculation, press again on control 5.
Press the button successively so that the display shows, in t u r n , t h e a i r fl o w t o :
Page 50 of 257
51
III
C O M F O R T
H e a t e d s e a t s
The front seats can be heated inde-pendently. Use the controls placed on the sides of the seats, turning them to select one of three heating levels:
0: Off.
1: Gentle heat.
2: Medium heat.
3: Strong heat.
The seat temperature will adjust accordingly.
Note: The heated seats will only operate when the engine is running.
Note: The seats can still be moved on a temporary basis:
- when opening one of the front doors.
- after switching off the ignition.
E l e c t r i c a l l y o p e r a t e d a d j u s t m e n t s
A d j u s t m e n t o f s e a t h e i g h t , a n g l e a n d r e a c h
A d j u s t m e n t o f b a c k r e s t a n g l e a n d l u m b a r s u p p o r t
Raise or lower the front of control 1 to make the front of the seat cushion higher or lower.
Raise or lower the rear of control 1 to make the seat higher or lower.
Action control 1 to the front or to the rear to move the seat forward or back.
Push the top of control 2forward or back to adjust the backrest angle.
Raise or lower control 2to increase or decrease the lumbar support.
Page 51 of 257
52 III
C O M F O R T
M e m o r i s a t i o n o f d r i v i n g positions
You have the possibility to memorise two driving positions, via the buttons M / 1 and M / 2.
M e m o r i s a t i o n u s i n g t h e b u t t o n s
To memorise, using the buttons located on the side of the seat:
- turn the ignition key to the drive position,
- adjust your seat and your exterior rear view mirrors,
- press on button M then imme-diately on button 1 " fi r s t d r i v i n g position" or on button 2 "second driving position".
The memorisation is recognised by an audible signal. Memorising of a new position cancels the previous one.
R e c a l l o f a m e m o r i s e d d r i v i n g position
V e h i c l e s t o p p e d (ignition on or engine running)
- P r e s s b r i e fl y o n b u t t o n 1 or 2 or to recall the corresponding memo-rised position.
Note: a f t e r fi v e c o n s e c u t i v e r e c a l l s of a memorised position, this func-tion will be deactivated until the engine is started.
V e h i c l e m o v i n g
- Keep button 1 or 2 pressed to recall the corresponding memo-rised position.
Page 54 of 257
55
III
C O M F O R T
DOOR MIRRORS
A d j u s t m e n t o f r e a r v i e w m i r r o r s
Functions with ignition switched on.
From the driver’s position, select the rear view mirror via the control 1, then adjust in the four directions by moving the control 2.
Deicing of rear view mirrors is cou-pled with electric demisting of the rear screen.
F o l d - b a c k o f d o o r m i r r o r s
When the vehicle is parked, the door mirrors can be folded back either manually or electrically.
E l e c t r i c f o l d - b a c k
From the central position, one press towards the rear on control 1 folds the rear view mirrors back.
To return them to the initial position, press again on the control towards the rear.
A u t o m a t i c e l e c t r i c f o l d b a c k
Automatic fold-back operates when you lock the doors with the remote control.
The opposite movement applies when you unlock the doors, except if you operated fold-back before switching off the ignition.
Note: Automatic fold-back of the rear view mirrors can be deactivated. Consult your CITROËN dealer.
A u t o m a t i c t i l t i n g o f m i r r o r s w h e n r e v e r s i n g
Ths function automatically gives you a view of the ground while reversing the vehicle.
Activation
With the engine running:
- Select the rear view mirror using control 1.
- Engage reverse gear, the mirror glass automatically positions itself to improve your vision of the pave-ment.
- If necessary, adjust the mirror to your preference using the electric control 2.
Deactivation
To deactivate the function, move control 1 to the central position.
Page 56 of 257
57
IV
A C C E S S
The key operates all the vehicle’s locks as well as the ignition.
Note: For safety reasons, a buzzer will sound if you have switched off the ignition and opened the driver’s door without previously removing the ignition key.
The key is used to deactivate the passenger’s front airbag (see "Safety").
It is dangerous to deadlock the vehicle when someone is inside as unlocking from the interior is impossible (without the remote control).
In the event of loss of the keys go to a CITROËN dealer with proof of ownership of the vehicle.
The CITROËN dealer network will be able to recover the key code and the transponder code to order replacement keys.
Central locking using the key
A brief action with the key locks the vehicle.
Central deadlocking using the key
A second action straight away with the key deadlocks the vehicle. It is then impossible to open the doors from either inside or outside the vehicle.
A long action with the key closes the windows.
Note: With the vehicle stationary and the engine switched off, locking i s s i g n a l l e d b y t h e fl a s h i n g o f t h e interior locking control warning lamp.
If any of the doors, or the boot, is open or not properly closed, central locking does not operate.
KEYS
Electronic immobiliser
The key contains a coded electronic chip. When switching on, the code must be recognised to allow the engine to be started.
This electronic immobiliser locks the engine management system a few seconds after switching off the ignition, and prevents unauthorised starting of the engine.
F o r a n y m o d i fi c a t i o n c o n c e r n i n g the keys it is essential to contact a CITROËN dealer taking the keys it is the keys it all of the keys in your possession with you.
Advice
If the key is not recognised, starting is not possible.
If this occurs, leave your vehicle immobilised and contact a CITROËN If this occurs, leave your vehicle vehicle
dealer.
Page 63 of 257
63
IV
A C C E S S
If you decide to drive with the doors locked, remember that in the event of an accident this r e n d e r s a c c e s s m o r e d i f fi c u l t for the emergency services.
Locking the doors from the inside
With the doors closed, press button B once to operate the electric central locking and unlocking.
The doors can still be opened from inside.
The central locking will not operate if a door is open, or not properly closed.
The lamp on the control B can signal any of 3 statuses:
- I t fl a s h e s i f t h e d o o r s a r e o p e n when the vehicle is stationary, engine stopped.
- It lights up if the doors are locked and the ignition is switched on.
- It goes out if the doors are not locked.
DOORSNote: Control B is inactive if the vehicle has been locked with the remote control or with the key.
Personal security
When the vehicle is started, the system automatically locks the doors and tailgate as soon as you reach a speed of approx. 10 km/h (6 mph).
Note: If a door is opened, this door will automatically relock as soon as the vehicle reaches approx. 6 mph.
Activation/Deactivation of the function
After switching on the ignition, give a long press on the central unlocking button until a message is displayed.
This allows from the front, deactivation of the opening of the rear doors and the use of the rear windows.
It is activated by means of a press on control A located on the electric windows control panel. The warning lamp in the instrument panel lights up for approx. 10 seconds.
Each time the ignition is switched on, the warning lamp comes on for approx. 10 seconds.
Opening of the doors from the outside and operation of the rear electric windows remain possible from the front of the vehicle.
Electric child safety