2008 Citroen BERLINGO FIRST DAG driver seat adjustment

5FAMILIARISATION-
INSTRUMENTS AND CONTROLS

12. Windscreen demisting vents.

13. Speaker (tweeter).

14. Side window demisting vents.

15. Side adjustable heating/
ventilation vents.

16. Passenger air bag disarming
control.

17. Upper glove box or passenger
air bag.

18. Lower glove box.

19. Audio RD3.

20. Heating/air conditioning controls.

21. Storage.

22. Removable ashtray.

23. Gear lever.

24. Lighter.

25. Handbrake.
26. Heated seats control.

27. Steering lock and ignition.

28. Steering wheel adjustment
control.

29. Bonnet release.

30. Fuse box.

31. Headlamp height adjustment.

32. Passenger's electric mirror
control.

1. Speed limiter/cruise control stalk.

2. Lights and direction indicators
stalk.

3. Driver's air bag.
Horn.

4. Instrument panel.

5. Audio equipment steering wheel
control.

6. Windscreen wipers/
wash-wipe stalk.

7. Central adjustable heating/
ventilation vents.

8. Hazard lights button.

9. Multifunction display or clock.

10. Central lockingbutton.

11. Controls:
- Electric windows.
- Demisting of rear door windows.
- Air conditioning.

FAMILIARISATION10 -
STEERING WHEEL HEIGHT ADJUSTMENT

 When stationary, push the control A
forwards to unlock the steering
wheel.

 Adjust the height of the steering
wheel.

 Lock it by pulling control A towards
you fully.
ELECTRIC WINDOWS

1. Driver's electric window.

2. Passenger's electric window.
EXTERIOR MIRRORS

 Move the manual control 3 in all
four directions to adjust.
Electric control for the
passenger's side mirror

 From the driver's seat, adjust in
all four directions by operating
the control 4 .
Manual mode:

 Press the switch. The window stops
as soon as the switch is released.
Automatic mode (driver):

 Press and hold the switch. One
touch completely opens or closes
the window.

 61
 62
 66

41SEATS-
FRONT SEATS

The adjustment is correct when
the upper edge of the head
restraint is level with the top of
the head.
To remove the head restraint, place it
in the top position, press the tabs and
pull it upwards.
To put it back in position, locate the
stems of the restraint in the holes,
taking care to keep them in line with
the seat back.
No person or object must pre-
vent the seat from returning
to its initial position; return to
this position is necessary for
the seat to lock in place.
4. Forwards-backwards
adjustment
Lift the control and slide the seat
forwards or backwards.
1. Head restraint height
adjustment
To raise or lower the restraint, slide it.
2. Armrests
These can be folded back. 3. Seat back angle adjustment
5. Storage drawer (version with
passenger air bag)
There is a storage drawer under the
front passenger seat.
To open it, lift it and pull. 6. Heated seats switch
Press the switch. The temperature is
controlled automatically.
Pressing the switch again stops
operation.

Note: the command for activation
of heating of the seat(s) remains
memorised for two minutes after the
ignition has been switched off.
7. Access to rear seats (version with one
sliding side door only)
Lift the control to fold the seat back
and move the seat forwards.
On repositioning, the seat returns to
its initial position (driver's side).
Do not place heavy objects
in the drawers.
A. Turn the knob.

B. Pull the lever (version
with one sliding side door
only).
Never drive with the head re-
straints removed; they must
be in place and correctly ad-
justed.

51SEATS-
The driver must ensure that
the passengers use the seat
belts correctly and that they
are all properly restrained
before setting off.
Wherever you are seated in the
vehicle, always fasten your seat belt,
even for short journeys.
Do not invert the seat belt buckles as
they will not fulfi l their role fully.
If the seats have armrests * , the lap
part of the seat belt must always
pass under the armrest.
The seat belts are fi tted with an inertia
reel permitting automatic adjustment
of the length of the strap to your size.
The seat belt is stored automatically
when not in use.
Before and after use, ensure that the
seat belt is rolled up correctly.
The lower part of the strap must be
positioned as low as possible on the
pelvis.
The upper part must be positioned in
the hollow of the shoulder.
The inertia reels are fi tted with an au-
tomatic locking device which comes
into operation in the event of a colli-
sion, on emergency braking or if the
vehicle rolls over. You can release
the device by pulling rapidly on the
strap and releasing it.

In order to be effective, a seat belt:
- must be tightened as close to the body as possible,
- must restrain one adult only,
- must not bear any trace of cuts or fraying,
- must be pulled in front of you with a smooth movement, checking
that it does not twist,
- must not be transformed or modifi ed to avoid altering its
performance.
In accordance with current safety
regulations, all repairs and checks
must be carried out by a CITROËN
dealer who guarantees that the work
is carried out correctly.
Have your seat belts checked regularly
by a CITROËN dealer and particularly
if the straps show signs of damage.
Clean the seat belt straps with soapy
water or a textile cleaning product,
sold by CITROËN dealers.
* According to model.
Recommendations for children:
- use a suitable child seat if the
passenger is less than 12 years
old or shorter than one metre fi fty,
- do not use the strap-guide * when a child seat is installed.
- never use the same seat belt to secure more than one person,
- never allow a child to travel on your lap.

Depending on the nature andse-
riousness of the impacts , the pre-
tensioning device may be triggered
before and independently of the air
bags. Triggering of the pre-tensioners
is accompanied by a slight emission
of harmless smoke and a noise, due
to the activation of the pyrotechnic
cartridge incorporated in the system.
In all cases, the air bag warning light
comes on.
Following an impact, have the seat
belts system checked, and if neces-
sary replaced, by a CITROËN dealer.
After folding or moving a
seat or rear bench seat,
ensure that the seat belt
is positioned and rolled up
correctly.

COMFORT AND SAFETY66 -
STEERING WHEEL HEIGHT ADJUSTMENT HEADLAMP ADJUSTMENT HORN
HAZARD WARNING LIGHTS
Press the button, the direction indicators
fl ash.
They can operate with the ignition off. Press one of the spokes or
the centre of the steering
wheel.

0 - With no load.

1 - With partial load.

2 - With average load.

3 - With maximum authorised load.

0 - 1 or 2 people in the front seats.

- - 3 people.

1 - 5 people.

2 - 5 people + maximum authorised
load.

3 - Driver + maximum authorised
load.

Initial setting is position 0.
Depending on the load in your vehicle,
it is recommended that the headlamp
beam is adjusted.
When stationary, lower the handle to
unlock the steering wheel.
Adjust to the desired height and
lift the handle to lock the steering
wheel.