2008 CHEVROLET COBALT Owners Manual

Page 129 of 402

CHEVROLET COBALT 2008 1.G Owners Manual RES+ (Resume):Press this button to resume a set
speed and to accelerate the speed.
SET– (Set):Press this button to set a speed and to
decrease the speed.
To set a speed do the following:
1. Press th

Page 130 of 402

CHEVROLET COBALT 2008 1.G Owners Manual Passing Another Vehicle While Using
Cruise Control
Use the accelerator pedal to increase the vehicle’s speed.
When you take your foot off the pedal, the vehicle will slow
down to the cruise control

Page 131 of 402

CHEVROLET COBALT 2008 1.G Owners Manual This position must be selected in order for the Wiper
Activated Headlamps to be activated. SeeWiper
Activated Headlamps on page 3-13.
P(Off/On):When operating in AUTO, a momentary
turn of the switch t

Page 132 of 402

CHEVROLET COBALT 2008 1.G Owners Manual Fog Lamps
If equipped, the fog lamp
button is located on the
instrument panel, to the left
of the steering wheel.
The ignition must be on to turn your fog lamps on.
Push the button to turn the fog lam

Page 133 of 402

CHEVROLET COBALT 2008 1.G Owners Manual Dome Lamp
Your vehicle may have a dome lamp.
9(Off):Move the lever to this position to turn the
lamp off, even when a door is opened.
1(Door):Move the lever to this position to turn the
lamp on whenev

Page 134 of 402

CHEVROLET COBALT 2008 1.G Owners Manual The battery can be discharged at idle if the electrical
loads are very high. This is true for all vehicles.
This is because the generator (alternator) may not be
spinning fast enough at idle to produc

Page 135 of 402

CHEVROLET COBALT 2008 1.G Owners Manual Certain electrical accessories may not be compatible
with the accessory power outlet and could result
in blown vehicle or adapter fuses. If you experience a
problem, see your dealer/retailer for addit

Page 136 of 402

CHEVROLET COBALT 2008 1.G Owners Manual Climate Controls
Climate Control System
The heating, cooling, and ventilation for the vehicle can
be controlled with this system.
Operation
To change the current mode, select one of the following:
H(V