2008 AUDI S8 light

Openin g and clos ing
So la r roo f*
The solar cel ls in the roof prov ide energy to operate the ventilat ion
system for the c limate control. It is activated automa tically after the
vehic le is parked . Depending o n solar irrad ia tion, the inter ior
t emperature of the veh ic le is lowered in the summer, in the winter
the interior is dehumidified .
Sola r pro tec tion with slidin g glass s un ro of
The s liding glass sun roof is equipped with an adjustable sunshade
t o reduce the effects of strong sunl ight . The so lar protect ion can be
moved at the recessed handle to open and close it . To prevent the
veh icle i nterior from heating up, you shou ld c lose the solar protec ­
tion when you park your v ehicl e in the sun.
When the roof is
s lid open , the sunshade is opened automat ical ly .
When th e roof is c losed , the sunshade can be closed manua lly .
When the roof is
tilt ed open , th e c losed sunshade is also raised at
t he rear edge . Bu t it can st ill be sl id open or closed.
0 Note
You shou ld always c losed the sliding/ti lting sunroof when you leave
your veh icle. Sudd en rain can d rench th e int erior equipment and
damage the electronic convenience features in your veh icle .
[ i ] Tips
If you park your veh icle in the sun, we recommend t hat you close
the sunshade .
•
Sliding/tilting the power sunroof open
Tilting the roof open
- Turn the rota ry sw itch to posit ion ®· -
In
positi on @ , briefly press the c ontrol to t ilt the roof up
c o mplete ly .
- To tilt the roof open to a ny i ntermediate posit io n
press
and hold
t he sw itch until the roof reac hes the desired
posit io n .
S liding th e roof op en
- T urn the switc h to position G) to open the roof a ll the
way .
- Tu rn the sw itch to any other pos ition to open t he roof to
any intermediate position .
When the glass roof opens, the sun visor, which is designed to ward
off strong sun light , opens along with it. The visor can be closed
manual ly when the sunroof is closed .
[ i ] Tip s
• Be aware that the sunroof may actually be open when the sun
v isor is c losed. Check and make sure that the sunroof is shut w hen
parking th e car or if i t sudden ly starts raining.
• If the sunroof is not fully closed but you have pressed and he ld
the switch for the tilt posit ion, the sunroof wil l not tilt .•
Closing the power sunroof
Sliding th e roof shut
- T urn the rotary sw itch to posit ion ® => page 65, fig . 53
=> & .
Tilting the roof shut
- Briefly pull the r ota ry sw itc h to cl ose the roof .

Clear vision
Lights
Switching the headlights on and off -'t/-·
In the "AUTO" position, a light sensor automatically
s w itches t he head- and taillights on and off in respo nse to
l igh t con ditions.
Fig . 56 In stru ment
pan el: lig ht sw itch
Switching on automatic headlight control
- T urn th e light switch to AUTO => fig. 56 .
Switching on the side marker lights
- Turn the light switch to ~oo~.
Switching on th e headlights and high beam
- T urn t he light swi tch to io.
- Push the high beam leve r forw ard towards t he instru -
me nt panel
=> page 73 .
Switching off the lights
- T urn t he light switch to 0 .
Contro ls a nd eq uip­
ment
Clear vision
The head lights only work when the ignition is switched on . While
starting the engine or when switching off the ignition, the head ­
lights will go off and only the side marker lights will be on.
After starting the engine, the xenon headlights are automatically
adjus ted to the load and angle of the vehic le (for example, during
acceleration, braking) . This prevents oncoming traffic from experi ­
encing unnecessary headlig ht g lare from your xenon head ligh ts .
If the system is not operating properly, a warning symbol in the
Auto -Check Control is displayed
=> page 36.
With the side marker lights or head ligh ts switched on, the sym bol
next to the light switch illuminates
:oo: .
Daytime running lights
• USA models : The daytime running lights wi ll come on automati­
ca lly when the ig nition is turned on and the ligh t
switch=> fig. 56 is
in the
O position or the AUTO position (only in day light conditions).
The
Daytime running lights function can be turned on and off in the
MMI menu
Exterior lighti ng => page 70 => & .
• Canada models: The dayti me ru nn ing lights wi ll come on auto ­
matically when the ignition is turned on and the light switch
::::> fig. 56 is in the O position or the AUTO p o siti on (only in daylight
conditions)
=> & .
Automati c headligh t control
In the switch position AUTO the a utomatic headligh t cont rol is
turned on . The low beams are turned on automa tica lly through a
light sensor as soon as ambient brightness (e.g . when driving into a
tunnel) fa lls below a value preset at the factory . When ambient
brightness increases again, the low beams are turned off again
automatically =>& .
In the AUTO pos it ion the low beams are switched off automatically
when the ignition is turned off. If the high beams were switched on,
they w ill come o n again the next time the automatic head ligh t
~
Vehicle care I I irechnical data

Clear vision
control is activated. The high beam function must first be switched
on in the MMI
=> page 70 .
Light Sensor Malfunction
In the event of a light sensor mal fu n ct ion, the driver is notified i n the
instrument cluster display :
@ Automatic headlights/automatic wipers defe ctive
For safety reasons the low beams are turned on permanently with
the switch in
AUTO . However, you can continue to turn the lights on
and off us ing the light switch . Have the light sensor checked as soon
as possib le at a dealership .
& WARNING
• Never use dayt ime running lights to see where you are going .
The y are not bright enough and will not let you see f ar enough
ahead for s afet y, espe cially at du sk or when it is d ark. Alwa ys
switch on the low beams at dusk or when it is dark .
• Autom atic he adlight s are onl y intended to a ssist the dr iver.
The y do n ot relie ve the dri ver of his re spon sibility to che ck the
headlights and to turn them on manuall y according to the current
light and vi sibility condi tion s. For example , fog and rain cannot be
dete cted b y the l ight sen sors . S o alway s switch on the he adlights
under these wea the r condition s and when driving in the dark
gD .
• Cra shes can h appen when you c annot see the road ahead and
when you cannot be seen b y other motori sts .
- Alway s turn on the headlight s so that you can see ahead and
s o that others c an see your c ar from the ba ck.
[ i ] Tips
• With the switch in AUTO front fog lights and rear fog lights
cannot be turned on in addition. • I
f you remove the ignition from the ignition lock while the head ­
li ghts are s til l on, a bu zzer w ill sound as long as the driver's door is
open to remind you to turn off the lights .
• Always observe t he specific local regulations for your area as to
when to use your lights .•
Adjusting exterior lighting
The functions are set in the MM/.
F ig . 57 MM I di spla y:
E xt eri or ligh ting
- Pressthe [CAR ]function button.
- Select
Systems in the CAR me nu.
- Selec t
Exterior lighting. The menu Exterior lighting
appears => fig. 57.
C oming home
The Coming home function ensures that after turning off the igni ­
tion and op ening the driv er's door
the vehicle periphery is il lum i­
nated in the dark . In addition, the front fog lights, the tail lights and
t he license plate lig ht are turned on . O n-t ime can be set fo r a period
from
O (off) to 60 seconds. ~

Le avi ng hom e
The Leaving home functions ensures that when unlocking the
vehicle periphery is i lluminated in the dark . In addition, the fron t fog
lights, the tai l lights and the license plate light a re turned on. Th is
function can be turned on and off .
High beam
With the switch in the AUTO position, the high beams can be turned
on only if the function is turned
on.
D aytime ru nning l ight s
USA models:
The daytime running lights can be turned on or off
using this function .
Canada models: The function cannot be tu rned off . It is activated
automatically each time t he ignition is turned on. This menu item is
shown "greyed out" .•
Front fog lights }0
Fi g. 58 Ins tru men t
pan el: lig ht swit ch
Switching on the front fog lights }D
- Do not turn the light switch -r:;_ -=> fig. 58 toward the fog
l ight symbol
- Tu rn t he light switch to
~oo: o r to fD .
Contro ls a nd eq uip­
ment
Clear vision
- P ull the ligh t switch to th e fi rst st op G) .
When the front fog l ights are on, the symbo l }D next to the ligh t
switch will illuminate .
[ i ] Tips
With the switch in AUTO front fog lights and rear fog lights cannot
b e turned on in addition .•
R ear fog lights 0$
Fig . 59 In strument
p an el: lig ht sw itc h
- Do not turn the light sw itch -r:;_ -=> fig. 59 toward the fog
light symbol
- Turn the light sw itch to
~oo: or to fD.
- Pull the light swit ch t o th e second stop 0-
W hen the rear fog lights are on, both the }D and
the light switch will i llum inate. symbols next to
~
Vehicle care I I irechnical data

Clear vision
0 Note
The rear fog lights can distract drivers behind you, so, they should be turned on
only in conditions of very poor visibility. Always
observe local regulations when using the rear fog lights.
[ i] Tips
With the switch in AUTO front fog lights and rear fog lights cannot
be turned on in addition. •
Applies to vehic les: with Adapt ive Ligh t
Adaptive Light
When making a turn or driving around tight corners, the
relevant area of the road is better illuminated.
Adaptive Light (making turns)
Fig. 60 Adaptive Light
when turning and
driving through curves
An additional bulb in the headlight provides a cornering light@ in
addition to the low
beam @~ fig. 60. Adaptive Light is switched on
and off automatically depending on driving conditions .
When you activate the turn signal lever, the Adaptive Light for the
same side is switched on. Please note that the turn signal lever must
engage. Adaptive Light is not switched on if you only move the
turn signal
lever to the point of resistance to signal a lane
change~ page 73,
"Turn signal¢ c:> and high beam 110 lever ".
When driving around bends, Adaptive Light is controlled according
to steering wheel angle .
• I t is switched on in tight corners.
• It is not switched on in long, open bends.
Adaptive Light (in curves)
When driving through curves, the low beams @are automatically
controlled depending on driving speed and the steering wheel
angle.
Th e two main beams pivot at different angles so that there is no
unilluminated area in front of the vehicle.
[ i] Tips
• The system works up to a speed of about 43 mph (70 km/h). If the
speed is higher, it is not activated.
• Adaptive Light (in curves) functions at a speed of about
6 mph
(10 km/h) and is deactivated at speeds below about 4 mph
(6 km/h).•

Emergency flasher ~
The emergency flasher makes other motorists aware that
you or your vehicle are in an emergency situation.
I
Fig . 61 Center
console : emergency
flasher switch
- Press the switch ~=>fig. 61 to turn the emergency
flashers on or off.
When the emergency flasher is on, all four turn signals blink at the
same time . Th e turn signal indi cator
ligh ts ¢¢ in th e instrum en t
cluster, as well as the light in the emergency flasher
switch~ blink
likewise .
The emergency flashers will turn on automatically if you are in an
accident where the airbag has deployed.
[ i] Tips
You should turn on the emergency flashers when:
• you are the last vehicle standing in a traffic jam so that any other
vehicles coming can see you , or when
• your vehicle has broken down or you are in an emergency situa ­
tion , or when
• your vehicle is being towed by a tow truck or if you are towing
another vehicle behind you .•
Contro ls a nd eq uip­
ment
Clear vision
Turn signal
¢ ¢ and high beam [D lever
The lever on the left side of the steering column is used to
operate the turn signals and the high beam as well as the
headlight flasher.
Fig . 62 Turn signal and
high beam lever
The turn s ignal and high beam lever has the following func­
tions:
Turn signals ¢ ¢
- Lift the lever up all the way=> fig. 62 to use the right turn
signals, or push the lever down all the way to use the left
turn signals .
Auto-blink
-Move the lever (up or down) just to the point of resis­
tance to use the turn signals for as long as you need
them, for example when chang ing lanes.
- Move the lever (up or down) just to the point of resis­
tance and then release it right away to make the turn
signals blink
three times. You can use this feature for
example when changing lanes on highways.
Vehicle care I I irechnical data

Clear vision
High b eam
~D
Push the lever forward to switch on the high beam.
- Pull the lever back towards you to switch off the high
beam .
Headlight flasher ~D
- Pull the lever toward the steering wheel to use t he head­
light flasher .
Notes on the se feature s
• The turn signals only work with the ignition turned on . Th e indi­
cator
l ights ¢ or¢ in the instrument cluster ~ page 16 also blink .
• After you have turned a corner, the turn signal switches off auto ­
matical ly .
• The high beam works only when the head lights are on . The indi ­
cator light
~D in the instrument cluster illuminates when the high
beams are on.
• The headlight flasher works only as long as you hold the lever -
even if ther e are no lights turned on. The indicator light
~D in the
instrument cluster illuminates when you use the headl ight flasher.
• With the switch in the
AUTO position, the high beams can only
be turned on if the function is switched on in MM I
=> page 70.
0 Note
Do not use the high beam or headlight flasher if you know that these
could blind oncoming traffic .•
Interior lights
Front interior lights
T he in terior lights include rea ding ligh ts for b oth the
d river and the fr ont passenge r.
--
1111
, I I, . II
-
~
•
'
'.(ZW
ro ,1@1
111111111
0
Interior lights
-
®
111111111
...
/!
111111111
0 Fig . 6 3 Rooflining:
Fr ont inter ior light s
Fi g. 64 Rooflining:
F ront readin g ligh ts:
- Press the @J button to tur n off the interior lights
~ fig . 63. If you pre ss the butt on a secon d time, the inte­
ri o r ligh ts in the rear ar e also t urned off .
- Press the
(ID butto n to turn on the door contact circui t.
Press the button a second time to tur n on the door
contact circ uit for the rear doors .

-Press the CD button to turn on the interior lights. If you
press the button a second time, the interior lights in the
rear are also turned on.
Reading lights ~
Press the switch to turn the right or left reading light on
or
off=:> page 74, fig. 64.
With the door contact circuit, 00 the interior lights turn on as soon
as you unlock the vehicle or open the doors. The interior lights are
also turned on when the ignition key is removed. The light goes out
about 2 minutes after the doors are closed. When the vehicle is
locked or when the ignition is turned on, the interior lights are
turned off .
When a door is open, the interior lights are turned off after about 10
minutes to prevent draining the battery .
[ i] Tips
The interior lights can be dimmed by holding the [D switch pressed
down. If the interior lights in the rear were turned on by pressing the
switch twice, the rear interior lights are also dimmed .•
Contro ls a nd eq uip­
ment
Clear vision
Rear Interior Lights
The rear interior lights also contain reading lights for
rear-seat passengers.
Fig. 65 Rooflining:
Rear interior lights
Fig . 66 Rooflining:
Rear reading lights
Interior lights
-Press the@) button to turn off the interior lights
=:> fig. 65.
-Press the (ID button to turn on the door contact circuit.
-Press the CD button to turn on the interior lights.
Vehicle care I I irechnical data