Navigation115
MMI componentsMMI control consoleMulti-function steering wheelTelephone handsetVoice control
– Press the rotary pushbutton. The top category destina-
tion will be set as the final destination or as a stopover.
– Start the route guidance by turning the rotary push-
button to Start route guidance and then pressing the
rotary pushbutton. The route criteria and subsequently
the map page 110 will be shown on the MMI display.
An arrow will appear in the display of the driver informa-
tion system.
Note
To update the list of top categories, exit the list by pressing the
button and select the same category again.
Applies to vehicles: with navigation system
Loading from the directory
Important: The navigation mode must be activated
page 105, and a navigation destination must be stored in
the directory page 84.
– Press the Memory control button.
– Turn the rotary pushbutton to Load from directory.– Press the rotary pushbutton. A list of entries fig. 105
will appear in the MMI display.
– To select a destination from the list turn the rotary push-
button to mark the entry and press to confirm, or
– To find an entry, turn the rotary pushbutton to Find entry
and press to confirm. You can now search for a name
using the speller.
– Start the route guidance by turning the rotary push-
button to Start route guidance and then pressing the
rotary pushbutton. The route criteria and subsequently
the map page 110 will be shown on the MMI display.
An arrow will appear in the display of the driver informa-
tion system.
Applies to vehicles: with navigation system
Route
Routes that have been stored previously can be loaded as
a new navigation destination.
Important: The navigation mode must be activated
page 105, a route must have been stored page 113,
and the system must be set to Route with stopover
page 105.
– Press the Memory control button.
– Turn the rotary pushbutton to Load route.
– Press the rotary pushbutton. A list of entries will appear
in the MMI display.
– To select a route from the list turn the rotary pushbutton
to mark a route and press to confirm.
RETURN
Fig. 105 Loading desti-
nation from directory
Navigation 116
– Start the route guidance by turning the rotary push-
button to Start route guidance and then pressing the
rotary pushbutton. The route criteria and subsequently
the map page 110 will be shown on the MMI display.
An arrow will appear in the display of the driver informa-
tion system.
Other settings
Applies to vehicles: with navigation system
Special destinations
Special destinations can be selected in the entry space
when entering single destinations or stopovers.
– Select: Function selector button > Special
destination, or
– Select: Function selector button > stopover >
Special destination.
The navigation system can also guide you to special destinations
such as petrol stations or hotels. When entering your destination,
simply choose the approximate location of the special destination
(in the immediate vicinity, in the vicinity of the destination or nation-
wide). You can then select the category of the special destination
from a list (e.g. petrol station or hotel). The MMI display even indi-
cates the direction of the special destinations (arrows).
In immediate vicinity
The special destination is located in the immediate vicinity of your
vehicle. The special destinations are sorted according to the
distance from your current location, starting with the closest. You
can use this function, for example, to plan stopovers (closest restau-
rant).In vicinity of destination
The special destination is located in the vicinity of your destination.
You can use this function, for example, to find a petrol station near
your destination.
Nationwide
A special destination can be found irrespective of your current posi-
tion and your navigation destination. You can use this function, for
example, to navigate to an airport in the selected country.
Call: (telephone number)*
If telephone numbers are stored for a special destination on the
navigation DVD and your vehicle is equipped with a factory-fitted
telephone*, you can call the selected special destination. For
example, you can call a restaurant and reserve a table before driving
to the destination.
Note
There are certain destination entries in the list that cannot be
displayed completely because they are too long (too many charac-
ters). If you select one of these entries, a separate window will be
displayed after a few seconds. This window will show more informa-
tion about the selected entry.
Applies to vehicles: with navigation system
Top destination
– Select: Function selector button , or
– Select: Function selector button > stopover.
When storing a navigation destination, you can activate the func-
tion Display as top destination (). Top destinations are listed in the
destination entry screen page 105, fig. 91 and can be copied into
the destination entry field directly.
NAV
NAV
NAV
NAV
!
Navigation 118
Applies to vehicles: with navigation system
Avoiding a route
– Select: Function selector button > control button
Route > Avoid route from here.
When the route guidance is activated, a section of the calculated
route that you have set will be avoided. The navigation system will
calculate an alternative route.
Using the rotary pushbutton, select the length of the route which is
to be avoided.
If you stop and restart the route guidance, it will be necessary to
reenter the route section to be avoided.
Note
If the MMI is not able to offer an alternative route, this indicates that
no suitable detour is available in the vicinity.
Applies to vehicles: with navigation system
Navigation details
– Select: Function selector button > control button
Nav-Info.
When the route guidance is activated, the following information on
your destination will be displayed:
•Destination / stopovers
•Estimated time of arrival
•Distance to the destination
•Current position of the vehicle
•Longitude and latitude coordinates of the destination
•Longitude, latitude and altitude of the vehicle
•Satellites received
The last route guidance cue will be repeated.
Call: (telephone number)*
If telephone numbers are stored for a special destination on the
navigation DVD and your vehicle is equipped with a factory-fitted
telephone*, you can call the selected special destination. For
example, you can call a restaurant and reserve a table before driving
to the destination.
Applies to vehicles: with navigation system
Map colours
– Select: Function selector button > function
selector button > Map colours.
Day
The map background will be lit brightly.
Night
The map background will be darkened.
Auto
When the dipped lights are on, the map scheme will switch from day
to night.
Applies to vehicles: with navigation system
Orientation
– Select: Function selector button > function
selector button > Orientation.
North
The map is set to face north. The position of the arrow will change
according to the movement and direction of the vehicle.
NAV
NAV
NAV
SETUP
NAV
SETUP
Using the telephone 148
– When the message Do you really wish to connect to the
emergency number? appears in the handset display,
confirm with Ye s. The emergency number will be dialled.
With SIM card and PIN entered
– Switch on the ignition, the MMI and (if not already acti-
vated) the handset page 140. A Bluetooth connection
must exist between the handset and the car telephone
kit, and a SIM card must be in the handset.
– If necessary, press the “End call” button to display the
main screen page 142, fig. 126.
– Enter the emergency number (e.g. 112).
– Press the “Call” button page 140, fig. 124 to start
dialling.
WARNING
Since your telephone operates via radio waves, a connection
cannot be guaranteed under all circumstances. Do not rely solely
on your telephone when a vital communication (e.g. medical emer-
gency) is involved.
Note
•You can also dial an emergency number on the MMI page 89.
•Always follow the directions of the emergency operators when
making an emergency call. Do not end the call before you are
requested to do so. Otherwise, this could result in life-saving infor-
mation not being passed on.
•Emergency numbers are not the same for all countries. Please
familiarise yourself with the correct emergency numbers in advance
when travelling in foreign countries or regions where the numbers
may be different.
Applies to vehicles: with handset for the car telephone kit
Ending calls
– To end an active call or stop dialling a number, press the
control button for End call fig. 133, or
– Press the “End call” button page 140, fig. 124.
If you placed a call on hold earlier on, that call will remain on hold.
Use the Resume function to continue the call.
If a menu is open in the handset display, the menu will be closed the
first time you press the “End call” button. The active call is discon-
nected when you press the “End call” button again.
A7
Fig. 133 Active call
A3
Index189
MMI componentsMMI control consoleMulti-function steering wheelTelephone handsetVoice control
R
Radio
MMI control console . . . . . . . . . . . . . . . 53
Multi-function steering wheel . . . . . . 129
Speech dialogue system . . . . . . . . . . . 174
Radio clock . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Radio mode, activating
MMI control console . . . . . . . . . . . . . . . 54
Speech dialogue system . . . . . . . . . . . 174
Radio reception, optimising . . . . . . . . . . . 60
Radio stations on MMI control console
Frequency . . . . . . . . . . . . . . . . . . . . . . . . 56
Moving . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Next station . . . . . . . . . . . . . . . . . . . . . . 56
SCAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Searching . . . . . . . . . . . . . . . . . . . . . . . . 56
Selecting from memory . . . . . . . . . . . . 58
Selecting from station list . . . . . . . . . . 55
Storing . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Radio stations on multi-function steering
wheel
Selecting from memory . . . . . . . . . . . 130
Selecting from station list . . . . . . . . . 130
Radio text . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Read error message (CD/DVD) . . . . . . . . . . 11
Received calls
Handset . . . . . . . . . . . . . . . . . . . . . . . . . 152
MMI control console . . . . . . . . . . . . . . . 91
Multi-function steering wheel . . . . . . 133
Redial
Handset . . . . . . . . . . . . . . . . . . . . . . . . . 145
MMI control console . . . . . . . . . . . . . . . 97Phone pre-installation . . . . . . . . . . . . . 102
Speech control system . . . . . . . . . . . . 163
Speech dialogue system . . . . . . . . . . . 177
Regional station function . . . . . . . . . . . . . . 59
Repeat . . . . . . . . . . . . . . . . . . . . . . . . . . 68, 69
Repeat command . . . . . . . . . . . . . . . . . . . . 51
Requirements for using the telephone . . . 87
Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Restart (MMI) . . . . . . . . . . . . . . . . . . . . . . . . 50
Rewind in track (media drive) . . . . . . . . . . 65
Ring tone
Handset . . . . . . . . . . . . . . . . . . . . . . . . . 155
MMI control console . . . . . . . . . . . . . . . 96
Ring tone volume . . . . . . . . . . . . . . . . . . . 155
Rotary pushbutton . . . . . . . . . . . . . . . . . . . 41
Route
Avoiding . . . . . . . . . . . . . . . . . . . . . . . . 118
Deleting . . . . . . . . . . . . . . . . . . . . . . . . . 117
Loading . . . . . . . . . . . . . . . . . . . . . . . . . 115
Storing . . . . . . . . . . . . . . . . . . . . . . . . . 113
With stopover(s) . . . . . . . . . . . . . . 105, 108
Without stopover(s) . . . . . . . . . . . 105, 107
Route criteria . . . . . . . . . . . . . . . . . . . . . . . 117
Route guidance . . . . . . . . . . . . . . . . . . . . . 104
Changing . . . . . . . . . . . . . . . . . . . . . . . 108
In driver information system . . . . . . . 111
On MMI display . . . . . . . . . . . . . . . . . . 110
Stopping . . . . . . . . . . . . . . . . . . . . . . . . 110
Volume . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Route list . . . . . . . . . . . . . . . . . . . . . . . . . . 117
Route options . . . . . . . . . . . . . . . . . . . . . . 117Route plan
Changing . . . . . . . . . . . . . . . . . . . . . . . . 117
Entering . . . . . . . . . . . . . . . . . . . . . . . . . 108
S
SCAN
Radio stations . . . . . . . . . . . . . . . . . . . . . 56
Tracks (media drives) . . . . . . . . . . . . . . . 66
Scroll text . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Searching (radio) . . . . . . . . . . . . . . . . . . . . . 56
Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Handset . . . . . . . . . . . . . . . . . . . . . . . . . 155
On MMI control console . . . . . . . . . . . . 98
While navigating . . . . . . . . . . . . . . . . . 104
While using telephone . . . . . . . . . . . . . 87
Selecting AV source . . . . . . . . . . . . . . . . . . 76
Sending tone sequence . . . . . . . . . . . . . . 149
Service following
DAB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Setting display . . . . . . . . . . . . . . . . . . . . . . . 77
Setting the time . . . . . . . . . . . . . . . . . . . . . . 49
Showing report on map . . . . . . . . . . . . . . 122
Shuffle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Shutdown delay . . . . . . . . . . . . . . . . . . 96, 101
SIM card (handset) . . . . . . . . . . . . . . . . 30, 31
Single destination, entering . . . . . . . . . . . 107
Software version
Handset . . . . . . . . . . . . . . . . . . . . . . . . . 155
MMI control console . . . . . . . . . . . . . . . 52
Sorting call lists . . . . . . . . . . . . . . . . . 100, 102