2008 AUDI A5 RNS_E Navigation System Manual

Navigation (NAV) 156Yo u c a n m o d i fy t h e m a p c o n t e n t s d i s p la ye d to s ui t yo u r w is he s . Th e
map contents are shown according to the scale selected.Vo i c e i n fo r m a t i o nFig. 168 Setup Navigation: Active voice commands–Press the
page 16 function button in the navi-
gation menu.
– Highlight Voice information with a check mark



fig.168. The voice commands are given during route
guidance.
Delete previous destinations– Press the function button
page 16 in the navi-
gation menu.
– Select Delete previous destinations
fig.168.
– Bestätigen Sie Are you sure you that want to delete the
previous destinations? with Ye s. The entire list of
previous destinations is deleted.Tu rn l i s t
During route guidance upcoming changes of direction
are shown with the estimated distance.Fig. 169 Setup Navigation: Map display with active turn list
SETUP
SETUP

Navigation (NAV)157
General operation
RADIO, CD
NAME, TEL
NAV, INFO
CAR, SETUP
– Press the function button
page 16 in the navi-
gation menu.
– Highlight Turn list with a check mark


page 151,
fig.163 to activate the function.
Th e n e x t th re e up c o mi n g t u rn s
page 156, fi g .1 6 9 a r e s h o wn in
the Turn list.
The immediate upcoming turn is shown in the bottom section of the
table.
If you pass a turn, it is deleted from the three-part table. The next
turn drops down into the list.
The following information is shown in the Turn list:


Recommended direction shown as an arrow, traffic circulars or
freeway entrances and exits, stopovers and destination


Names of streets, secondary roads and freeways you should be
driving on following the turn


Estimated distance to each recommended turn or to destination
The name underneath the three-line Turn list shows you the road
you are presently driving on.Tips
If you have activated the Turn list and freeway information page 157, you are shown the list of freeway information on free-
ways
fig.170 and the Turn list on other roads
page 156,
fig.169.
Highway info
When driving on freeways, additional information is
sh o w n , f o r e x a m p l e f o r p a r ki ng a re as , f re e w a y e x i t s o r
rest areas.Fig. 170 Setup Navigation: Map display with active freeway information– Press the function button
page 16 in the navi-
gation menu.
– Highlight Highway info w i t h a ch e ck m a r k


page 151,
fig.163 to activate the function.
Freeway information
fig.170 is shown for the route you are
traveling.
If you have activated freeway information, you are shown a list of
the next three items of freeway information.
SETUP
A1
A2
A;
SETUP
A2

Navigation (NAV) 158The immediate upcoming event (for example, an upcoming freeway
interchange) is shown in the bottom section of the table.
I f yo u p as s a n e v e n t , it is d e le t e d f ro m t h e t h re e - p a r t t a b l e . Th e n e x t
event drops down into the list.
For events, the symbol is displayed
page 157, f i g .1 7 0 , fo r f r e e w a y
exits the number as well as the distance and estimated time of
arrival to the event is displayed.
The following freeway information can be displayed:


Freeway interchanges


Freeway exits


Parking areas


Filling stations and rest areas
Times of less than one minute until you reach the event are not
shown.
The name underneath the three-part table shows you the freeway,
secondary road and street names for the current location.Tips
If you have activated the Turn list
page 156 and freeway informa-
tion, you are shown the list of freeway information on freeways
page 157, fig.170 and the Turn list on other roads
page 156,
fig.169.
Intersection mapFig. 171 Setup Navigation: Intersection map
Fig. 172 Setup Navigation: Map display with active intersection map
A
A;

Navigation (NAV)159
General operation
RADIO, CD
NAME, TEL
NAV, INFO
CAR, SETUP
– Press the function button
page 16 in the navi-
gation menu.
– Highlight the Intersection map with a check mark



page 158, fig.171 to activate the function.
The map is divided into two parts at intersections. The right half of
the display continues to show you the map display you selected.
Th e l e ft h a l f o f t he d i s p l a y s h o w s y o u a p a ra l l e l e n l a r g e d v i e w o f t h e
intersection area
page 158, fig.172.
Next to the enlarged view, you are shown the changes in distance
until the turn-off point. At the same you are shown the name of the
street onto which you want to turn.
If you have activated the Auto intersection zoom function, the
Intersection map function cannot be activated.
If you would like to activate the Intersection map function, you first
have to deactivate the Auto intersection zoom function. These two
functions are mutually exclusive.
Tips
The map is oriented to driving direction
page 153 when switching
to zoom mode.
Auto intersection zoom
The map displays in zoom mode at intersections.Fig. 173 Setup Navigation: Auto intersection zoom activated– Press the function button
page 16 in the navi-
gation menu.
– Highlight the Auto intersection zoom with a check mark


fig.173 to activate the function.
For a detailed display, the map automatically zooms in at street
intersections, enhancing the view of the route from street to street.
If you have activated the Itersection map function, the Auto
intersection zoom function cannot be activated.
If you would like to activate the Auto intersection zoom function,
you first have to deactivate the Intersection map function. These
two functions are mutually exclusive.
SETUP
SETUP

Navigation (NAV) 160CompassFig. 174 Setup Navigation: Compass activated
– Press the function button
page 16 in the navi-
gation menu.
– Highlight Compass with a check mark


fig.174 to
activate the function.
If route guidance is not active, the vehicle orientation (compass
direction) is shown in the instrument cluster display
fig.175. If
the system recognizes the road, the road on which you are presently
driving is also shown.
Version information– Press the function button
page 16 in the navi-
gation menu.
– Select Version information
fig.174.The software version for the Navigation DVD in use is shown.
Tips
You can obtain information on updates for the Navigation DVD at an
Audi dealership.
Fig. 175 Instrument
cluster display
Example of a compass
display
SETUPSETUP

Navigation (NAV)161
General operation
RADIO, CD
NAME, TEL
NAV, INFO
CAR, SETUP
Demo modeFig. 176 Setup Navigation: Activate demo mode– Press the function button
page 16 in the navi-
gation menu.
– Highlight Demo mode with a check mark


fig.176 to
activate the function.
The Demo mode provides a simulation of the route you entered. This
allows you to effectively plan and display your destination by
showing specific map content
page 155 or route criteria
page 141.
Map type “Position 3D”
page 154 is not shown in Demo mode. If
you have selected map type “Position 3D”, the simulation is shown
in map type “current position”.
Set position/directionFig. 177 Setup Navigation: Input position/direction manually
Fig. 178 Setup Navigation: Set direction of position
SETUP

Navigation (NAV) 162
– In a destination input menu
page 117, fig.121, enter
the desired location data.
– Press the function button
page 16 in the navi-
gation menu.
– Select Set position/direction
page 161, fig.176.
– Using the crosshairs
page 149 on the map, select the
desired starting point for route guidance on the map.
– In the active side meu, select OK
page 161, fig.177.
– Set the direction of the location
page 161, fig.178 by
rotating the control knob.
– When you press the control knob, the system automati-
cally jumps back to the the Setup Navigation menu.You can calculate the route from another position than the present
vehicle location.
We recommend entering the data for the starting point into a desti-
nation input menu
page 117, fig.121 before you select the Set
position/direction. That way, the system will jump to the point
e n t e r e d i n t h e m a p d i s p l a y. I t i s e a s i e r t o s e t t h e l o c a t i o n o n t h e m a p
from this point.
You can search for the starting point using the crosshairs
page 149.
You can enter the starting point manually to calculate future routes.
When you have set the location manually on the map, you can
switch to a destination input menu to enter the destination data.
Start route guidance in Demo mode to simulate route guidance page 161.
Tips
It is only possible to set the location manually and to start route
guidance in Demo mode for a simulation if you vehicle is not
moving and GPS reception is not available
page 110 (e.g. in an
underground parking garage).
SETUP

Information (INFO)163
General operation
RADIO, CD
NAME, TEL
NAV, INFO
CAR, SETUP
Information (INFO)IntroductionSelecting information function
Navigation information can be selected using the
button.– Pr e s s t h e f u n c t i o n b u t t o n
page 16 t o d i s p l a y t h e
main information menu
fig.179.Th e m a i n i n f o r m a t i o n m e n u d i s p l a y s t h e s a m e i n fo r m a t i o n a s i n t h e
main function once the control button for the Nav-Info is
pressed.
Main information menuInformation data
Location and destination information can both be
displayed.Fig. 179 Info: Displaying the destination– Press the function button to display the main
information menu
fig.179. You are shown the destina-
tion or next stopover with address, estimated time of
arrival and distance.
– Rotate the control knob to the left. The data for the next
stopovers to the destination are displayed.
INFO
INFONAV
INFO