2008.5 Citroen C4 DAG engine
[x] Cancel search: enginePage 90 of 282
80
VI
L A Y O U T
ILLUMINATED GLOVE BOX
This has areas for storing a bottle of
w a t e r , t h e v e h i c l e ' s h a n d b o o k p a c k ,
etc.
I t s l i d h a s a r e a s f o r s t o r i n g a p e n , a
p a i r o f s p e c t a c l e s , t o k e n s , c a r d s , a
c a n , f r a g r a n c e c a r t r i d g e s . . .
T o o p e n t h e g l o v e b o x , r a i s e t h e
handle and lower the lid.
REFRIGERATED GLOVEBOX
I t m a y b e r e f r i g e r a t e d , d e p e n d i n g o n
y o u r v e h i c l e ’ s e q u i p m e n t , b y a v e n -
tilation duct that can be closed off
manually.
W i t h t h e a i r c o n d i t i o n i n g , t h i s d u c t
distributes the same cooled air as
the vents in the passenger compart-
ment.
T h e r e f r i g e r a t i o n o f y o u r g l o v e b o x
only operates when the engine is
running and the air conditioning is
on.
The lamp comes on au-
tomatically when the lid is
opened. F o r s a f e t y r e a s o n s , t h e
g l o v e b o x s h o u l d r e m a i n
closed when the vehicle is
moving.
Press the lower part of the hook
to unfold it.
Hang the strap of your bag on
the hook to secure it.
Page 96 of 282
80
VI
L A Y O U T
ILLUMINATED GLOVE BOX
This has areas for storing a bottle of
w a t e r , t h e v e h i c l e ' s h a n d b o o k p a c k ,
etc.
I t s l i d h a s a r e a s f o r s t o r i n g a p e n , a
p a i r o f s p e c t a c l e s , t o k e n s , c a r d s , a
c a n , f r a g r a n c e c a r t r i d g e s . . .
T o o p e n t h e g l o v e b o x , r a i s e t h e
handle and lower the lid.
REFRIGERATED GLOVEBOX
I t m a y b e r e f r i g e r a t e d , d e p e n d i n g o n
y o u r v e h i c l e ’ s e q u i p m e n t , b y a v e n -
tilation duct that can be closed off
manually.
W i t h t h e a i r c o n d i t i o n i n g , t h i s d u c t
distributes the same cooled air as
the vents in the passenger compart-
ment.
T h e r e f r i g e r a t i o n o f y o u r g l o v e b o x
only operates when the engine is
running and the air conditioning is
on.
The lamp comes on au-
tomatically when the lid is
opened. F o r s a f e t y r e a s o n s , t h e
g l o v e b o x s h o u l d r e m a i n
closed when the vehicle is
moving.
Press the lower part of the hook
to unfold it.
Hang the strap of your bag on
the hook to secure it.
Page 117 of 282
98
VIII
S A F E T Y
TRAJECTORY CONTROL SYSTEMS
Anti-skid regulation (ASR) and
electronic stability programme
(ESP)
The anti-skid regulation optimises
traction to prevent skidding of the
wheels, by acting on the brakes of
the driving wheels and on the en-
gine.
The electronic stability programme
acts on the brake of one or more
wheels and on the engine to keep
t h e v e h i c l e o n t h e t r a j e c t o r y r e q u i r e d
by the driver.
Activation
These systems are activated auto-
matically each time the vehicle is
started.
They come into operation in the event
o f a g r i p o r t r a j e c t o r y p r o b l e m . T h i s i s i n d i c a t e d b y fl a s h i n g
of this warning lamp on the
instrument panel. Deactivation
I n e x c e p t i o n a l c o n d i t i o n s ( s t a r t i n g a
vehicle which is bogged down, stuck
in snow, on soft ground...), it may be
advisable to deactivate the ASR and
ESP systems, so that the wheels
can move freely and regain grip.
Press the "ESP OFF" button,
located in the centre of the fascia. Reactivation
These systems are reactivated
automatically each time the ignition
is switched back on or from 30 mph
(50 km/h).
Press the "ESP OFF" button again
to reactivate them manually.
If this warning lamp comes
on in the instrument panel
and the indicator lamp on the
button comes on, this indi-
cates that the ASR and ESP
systems are deactivated. Operating fault
If this warning lamp comes
on, accompanied by an
audible signal and a mes-
sage on the multifunction
screen, this indicates a malfunction
of these systems.
Have the systems checked by a
CITROËN dealer.
T h e E S P / A S R s y s t e m s o f f e r e x c e p -
tional safety in normal driving, but
this should not encourage the driver
t o t a k e e x t r a r i s k s o r d r i v e a t h i g h
speed.
The correct functioning of these
systems depends on observation
of the manufacturer's recommen-
dations regarding the wheels (tyres
and rims), the braking components,
the electronic components and the
CITROËN assembly and operation
procedures.
After an impact, have these systems
checked by a CITROËN dealer.
Page 126 of 282
106
IX
D R I V I N G
HANDBRAKE
Mechanical brake to hold the vehicle
when stationary.
Applying
Pull the handbrake to immobilise
your vehicle.
Releasing
Pull on the handle and press the
button A to release the handbrake.
When the vehicle is being driven,
if this warning lamp and the STOP
warning lamp come on, accompa-
nied by an audible signal and a mes-
sage on the multi-function screen,
this indicates that the handbrake
is still on or has not been properly
released.
When parking on a slope, direct
your wheels against the pavement,
pull the handbrake on and engage
a gear.
5-SPEED MANUAL GEARBOX
Starting the vehicle
Check that the gear lever is in
neutral.
Do not touch the accelerator.
For Diesel engines: turn the
key to position M and wait until
the pre-heating warning lamp
switches off if it has come on.
Operate the starter, turning the
key until the engine starts (no
more than ten seconds).
In temperatures lower than 0 °C,
declutch whilst turning the starter
to facilitate starting. Engaging reverse gear
Push the gear lever to the
right then rearwards.
Only engage reverse gear when
the vehicle is stationary with the
engine at idle.
Page 127 of 282
107
IX
D R I V I N G
(6-SPEED) ELECTRONIC GEARBOX SYSTEM
The (6-speed) electronic gearbox
offers a choice between the comfort of
fully automatic operation or the driving
pleasure of manual gear changing.
Therefore, you have a choice of two
driving modes:
- the automatic mode for auto-
matic control of the gears by the
gearbox,
- the sequential mode for manual
changing of the gears by the driver.
6-SPEED MANUAL GEARBOX
Engaging reverse gear
Raise the ring A under the knob
and push the gear lever to the
left then forwards.
Only engage reverse gear when the
vehicle is stationary with the engine
at idle. Mode selection
automatic mode: selector in posi-
tion A .
manual mode: selector in posi-
tion M .
In automatic mode, instant manual
operation is possible any time you
action one of the paddles "+" or "-".
As a safety precaution and to facili-
tate starting of the engine:
- always select neutral,
- press the clutch pedal.
Page 128 of 282
107
IX
D R I V I N G
(6-SPEED) ELECTRONIC GEARBOX SYSTEM
The (6-speed) electronic gearbox
offers a choice between the comfort of
fully automatic operation or the driving
pleasure of manual gear changing.
Therefore, you have a choice of two
driving modes:
- the automatic mode for auto-
matic control of the gears by the
gearbox,
- the sequential mode for manual
changing of the gears by the driver.
6-SPEED MANUAL GEARBOX
Engaging reverse gear
Raise the ring A under the knob
and push the gear lever to the
left then forwards.
Only engage reverse gear when the
vehicle is stationary with the engine
at idle. Mode selection
automatic mode: selector in posi-
tion A .
manual mode: selector in posi-
tion M .
In automatic mode, instant manual
operation is possible any time you
action one of the paddles "+" or "-".
As a safety precaution and to facili-
tate starting of the engine:
- always select neutral,
- press the clutch pedal.
Page 129 of 282
108
IX
D R I V I N G
Displays on the instrument
panel
- The selector position is displayed in the instrument panel, on the
left on multifunction screens A
and C and on the right on the
NaviDrive multifunction screen.
- A background-lit position grille associated with the selector al-
lows you to view the position se-
lected. Moving off
When the ignition is on, light-
ing of the service warning lamp,
accompanied by
an audible
sig-
nal and the message "Gearbox
faulty" indicates a malfunction.
Consult a CITROËN dealer.
For safety:
Position N can only be disen-
gaged if you are pressing the
brake pedal.
If the gearbox is in position N
but the selector position is dif-
ferent, reposition the selec-
tor on N in order to be able to
start.
To start the engine, the selector
has to be in position N .
P r e s s fi r m l y o n t h e b r a k e p e d a l .
Operate the starter.
When the engine is running,
place the selector on R , A or M
as desired.
Check, in the instrument panel,
the position engaged.
Release the brake pedal and
accelerate.
If the selector is not in position N ,
and/or if the brake pedal is not
pressed, the corresponding warning
lamp(s) are displayed and a mes-
sage informs you that at least one of
these two conditions is not met.
In this case, the engine will not start,
recommence the above procedure.
Engaging reverse gear
To engage reverse gear, move the
selector to R .
Only attempt to
select
reverse gear
when the vehicle is stationary.
If the vehicle is moving rapidly, if
an inadvertent attempt to engage
reverse gear is made, the warning
lamp N w i l l fl a s h a n d y o u r v e h i c l e
will go automatically into neutral. To
re-engage a gear, you have only to
reposition the selector on A , M or R .
Reverse gear
Page 130 of 282
109
IX
D R I V I N G
Neutral
Changing to neutral
To change to neutral, move the selec-
tor to N . If the vehicle is moving, do
not select this position even momen-
tarily. Automatic mode
Changing to automatic mode
To change to automatic mode, move
the selector to A . Manual mode
Changing to manual mode
Manual mode activates when you
move the selector to M .
Pull the paddle "
+
" to change up
a gear.
Pull the paddle "
-
" to change
down a gear.
When the engine is running, before
accelerating to move the vehicle,
make sure that the position engaged
on the selector grille or in the instru-
ment panel is either: R , A or M .
Do not leave the vehicle with the
engine running in R , A or M .