2007 YAMAHA YBR250 steering

TABLE OF CONTENTESSAFETY INFORMATION .................... 1-1
DESCRIPTION ................................... 2-1Left view ........................................ 2 - 1
Right view ...................................... 2 - 2
Controls and instruments ............. 2 - 3
INSTRUMENT AND CONTROL
FUNCTIONS ....................................... 3-1 Main switch/steering lock ............. 3 - 1
Indicator and warning lights ........ 3 - 2
Speedometer ................................. 3 - 2
Tachometer .................................... 3 - 3
Multi-function display ................... 3 - 3
Handlebar switches ...................... 3 - 4
Clutch lever ................................... 3 - 5
Shift pedal ..................................... 3 - 6
Brake lever .................................... 3 - 6
Brake pedal ................................... 3 - 6
Fuel tank cap ................................. 3 - 7
Fuel ................................................ 3 - 7
Catalytic converter ........................ 3 - 8
Seat ................................................ 3 - 9
Helmet holder ................................ 3 - 9
Storage compartment .................3-10
Adjusting the shock aborber
assemblies ............................... 3-10
Luggage strap holders ...............3-11
Sidestand ..................................... 3-11
Ignition circuit cut-off system .....3-12 PRE-OPERATION CHECKS .............. 4-1
Pre-operation check list ............... 4 - 2
OPERATION AND IMPORTANT
RIDING POINTS ................................. 5-1 Starting the engine ....................... 5 - 1
Shifting ........................................... 5 - 2
Tips for reducing fuel
consumption .............................. 5 - 3
Engine break-in ............................ 5 - 3
Parking .......................................... 5 - 4
PERIODIC MAINTENANCE AND
MINOR REPAIR .................................. 6-1 Owner’s tool kit .............................. 6 - 1
Periodic maintenance and lubrication chart ......................... 6 - 2
Removing and installing the cowling and panels ................... 6 - 6
Checking the spark plug .............. 6 - 7
Engine oil and oil filter element ... 6-8
Cleaning the air filter element ... 6-11
Checking the engine idling
speed ........................................ 6-12
Checking the throttle cable free play .................................... 6-12
Valve clearance .. ........................6-12
Tires ............................................. 6-13
Cast wheels ................................. 6-15
Adjusting the clutch lever free play .................................... 6-15Adjusting the brake pedal
position and free play .............6-16
Adjusting the rear brake light switch ........................................ 6-17
Checking the front brake pads
and rear brake shoes ..............6-17
Checking the front brake fluid level .......................................... 6-18
Changing the brake fluid ...........6-18
Drive chain slack ........................6-19
Cleaning and lubricating the
drive chain ............................... 6-20
Checking and lubricating the cables ....................................... 6-21
Checking and lubricating the throttle grip and cable .............6-21
Checking and lubricating the
brake and clutch levers ...........6-21
Checking and lubricating the brake and shift pedals ............6-22
Checking and lubricating the sidestand .................................. 6-22
Lubricating the rear
suspension .............................. 6-23
Checking the front fork ...............6-23
Checking the steering ................6-24
Checking the wheel bearings ....6-24
Battery .......................................... 6-24
Replacing the fuses ....................6-26
Replacing the headlight bulb ....6-27
Replacing a turn signal light bulb or the tail/brake light bulb .......6-28
indice.pmd 24/1/2007, 14:37
1

1-3
1
SAFETY INFORMATION
as possible on both sides of the
motorcycle to minimize imbalance
or instability.
l
Shifting weights can create a
sudden imbalance. Make sure that
accessories and cargo are securely
attached to the motorcycle before
riding. Check accessory mounts
and cargo restraints frequently.
l
Never attach any large or heavy
items to the handlebar, front fork,
or front fender. These items,
including such cargo as sleeping
bags, duffel bags, or tents, can
create unstable handling or a slow
steering response.
Accessories
Genuine Yamaha accessories have
been specifically designed for use on
this motorcycle. Since Yamaha cannot
test all other accessories that may be
available, you must personally be
responsible for the proper selection,
installation and use of non-Yamaha
accessories. Use extreme caution when
selecting and installing any accessories.
Keep the following guidelines in mind,
as well as those provided under“Loading” when mounting accessories.
l
Never install accessories or carry
cargo that would impair the
performance of your motorcycle.
Carefully inspect the accessory
before using it to make sure that it
does not in any way reduce ground
clearance or cornering clearance,
limit suspension travel, steering
travel or control operation, or
obscure lights or reflectors.lAccessories fitted to the
handlebar or the front fork area
can create instability due to
improper weight distribution or
aerodynamic changes. If
accessories are added to the
handlebar or front fork area, they
must be as lightweight as
possible and should be kept to a
minimum.lBulky or large accessories may
seriously affect the stability of the
motorcycle due to aerodynamic
effects. Wind may attempt to lift
the motorcycle, or the motorcycle
may become unstable in cross
winds. These accessories may
also cause instability whenpassing or being passed by large
vehicles.
lCertain accessories can displace
the operator from his or her
normal riding position. This
improper position limits the
freedom of movement of the
operator and may limit control
ability, therefore, such
accessories are not
recommended.
l
Use caution when adding electrical
accessories. If electrical
accessories exceed the capacity of
the motorcycle’s electrical system,
an electric failure could result,
which could cause a dangerous
loss of lights or engine power.
Gasoline and exhaust gas
l
GASOLINE IS HIGHLY
FLAMMABLE:lAlways turn the engine off when
refueling.lTake care not to spill any gasoline
on the engine or exhaust system
when refueling.lNever refuel while smoking or in
the vicinity of an open flame.
cap 1.pmd 24/1/2007, 14:37
3

3-1
3
INSTRUMENT AND CONTROL FUNCTIONS
EAU10460
Main switch/steering lockThe main switch/steering lock controls
the ignition and lighting systems, and is
used to lock the steering. The various
positions are described below.
OFF ON
LOCK
EAU10570
ON
All electrical circuits are supplied with
power; the meter lighting, taillight and
auxiliary ligth come on, and the engine
can be started. The key cannot be
removed.The headlight comes on automatically
when the engine is started and stays
on until the key is turned to “OFF”
EAU10660
OFF
All electrical systems are off. The key
can be removed.
EAU10680
LOCK
The steering is locked, and all electrical
systems are off. The key can be
removed.To loc
k the steer
ing
1. Turn the handlebars all the way to the left.
2. Push the key in from the “OFF” position, and then turn it to “LOCK”
while still pushing it.
3. Remove the key.
1. Push
2. Turn
To unloc
k the steer
ing
Push the key in, and then turn it to “OFF”
while still pushing it.
1. Push
2. Turn
EWA10060
Never turn the key to “OFF” or
“LOCK” while the vehicle is moving,
otherwise the electrical systems will
be switched off, which may result in
loss of control or an accident. Make
sure that the vehicle is stopped before
turning the key to “OFF” or “LOCK”.
cap 3.pmd 24/1/2007, 14:37
1

6-24
6
PERIODIC MAINTENANCE AND MINOR REPAIR
EAU23280
Checking the steeringWorn or loose steering bearings may
cause danger. Therefore, the operation
of the steering must be checked as
follows at the intervals specified in the
periodic maintenance and lubrication
chart.1. Place a stand under the engine to raise the front wheel off the ground.
EWA10750
Securely support the motorcycle so
that there is no danger of it falling
over.2. Hold the lower ends of the front forklegs and try to move them forward
and backward. If any free play can
be felt, have a Yamaha dealer
check or repair the steering.
EAU23290
Checking the wheel bearingsThe front and rear wheel bearings must
be checked at the intervals specified in
the periodic maintenance and lubrication
chart. If there is play in the wheel hub or
if the wheel does not turn smoothly,
have a Yamaha dealer check the wheel
bearings.
EAUW0100
BatteryThe battery is located under the seat.
(See page 3-9).
This model is equipped with a sealed
type (MF) battery, which does not require
any maintenance. There is no need to
check the electrolyte or to add distilled
water.
ECA10620
Never attempt to remove the battery
cell seals, as this would permanently
damage the battery.
EWA10760
l
l l
l
l
Electrolyte is poisonous and
dangerous since it contains
sulfuric acid, which causes
severe burns. Avoid any contact
with skin, eyes or clothing and
always shield your eyes when
working near batteries. In case
of contact, administer the
following FIRST AID.l
l l
l
l
EXTERNAL: Flush with plenty
of water.
l
l l
l
l
INTERNAL: Drink large
cap 6.pmd 24/1/2007, 14:38
24

9-1
CONSUMER INFORMATION
9
EAU26351
Identification numbersRecord the key identification number,
vehicle identification number and model
label information in the spaces provided
below for assistance when ordering
spare parts from a Yamaha dealer or for
reference in case the vehicle is stolen.
VEHICLE IDENTIFICATION NUMBER:MODEL LABEL INFORMATION:
EAU26400
Vehicle identification number
12
1. Vehicle identification number
2. Model yearThe vehicle identification number is
stamped into the steering head pipe.
Record this number in the space
provided.The vehicle identification number is used
to identify your motorcycle and may be
used to register your motorcycle with
the licensing authority in your area.
EAU33941
Model label1. Model labelThe model label is affixed to the frame
under the passenger seat. (See page
3-9.) Record the information on this label
in the space provided. This information
will be needed when ordering spare parts
from a Yamaha dealer.
cap 9.pmd
24/1/2007, 14:38
1