Page 177 of 458
177
27p184
5. Touch the “Register” switch to con-nect your cellular phone to the sys-
tem.
27p185
6. When this screen is displayed, inputthe Passkey displayed on the screen
into the phone.
For the operation of the phone, see the
manual that comes with your cellular
phone.
If you want to cancel it, touch “Cancel”.
27p186
7. When the connection is completed, this screen is displayed.
You do not need to enter the phone in
case of using the same one.
Page 178 of 458
178
27p187
When this screen is displayed, follow the
guidance on the screen to try again.
27p188
Connecting a Bluetooth phone
(a) automatically
When you register your phone, auto
connection will be turned on. Always
set it to this mode and leave the
Bluetooth phone in a condition where
connection can be established.
Each time you touch the “Auto Connect”
switch, auto connection will be switched
on or off.
27p189
When the “ACC” or “IG ON” mode is
enabled, the selected Bluetooth phone
will be automatically connected and the
connection result is displayed.
This screen appears when the Bluetooth
phone is first connected after the “ACC”
or “IG −ON” mode is enabled.
Page 179 of 458
179
27p190
(b) manually
When the auto connection failed or
turned off, you have to connect
Bluetooth manually.
Touch the “Connect” switch after hav-
ing enabled the Bluetooth connection
on the phone.
27p191
When the connection is completed, this
screen is displayed.
Now you can use the Bluetooth phone.
Reconnecting the Bluetooth phone
If the Bluetooth phone is disconnected
with a poor reception from the
Bluetooth network when the “ACC” or
“IG ON” mode is enabled, the system
automatically reconnects the Bluetooth
phone. In this case, the connection
result is not displayed.
If the Bluetooth is disconnected on pur-
pose such as you turned your cellular
phone off, this does not happen. Recon-
nect it by the following methods.
Select the Bluetooth phone again.
Enter the Bluetooth phone.
Page 180 of 458