2007 TOYOTA LAND CRUISER phone

cxxiv
(a) Enter the Bluetooth phone
To use a handsfree system, you need to
enter your phone in the system. Once
you registered it, you can make a hands
free call.
1. Push the
“INFO” button to display
the “Information Menu” screen.
5u004
2. Touch the “Telephone” switch to
display “Telephone” screen.
You can also push
of the telephone but-
ton to display this screen when the vehicle is
stopped.
3. Touch the “Settings” switch to dis-
play “Settings” screen.
4. Touch the “Add Phone” switch to
connect your cellular phone to the sys-
tem.
5. When this screen is displayed, input
the Passkey displayed on the screen into
the phone.
For the operation of the phone, see the
manual that comes with your cellular phone.
If you want to cancel it, touch “Cancel”.

cxxv
6. When the connection is completed,
device name and Bluetooth Device Ad-
dress is displayed.
You do not need to enter it in case of using
the same phone.
(b) Select the Bluetooth phone
In case of registering a number of
Bluetooth phones, you need to select
the usual phone.
1. Touch the “Settings” switch to dis-
play “Settings” screen.
2. Touch the “Select” switch to dis-
play “Select Telephone” screen. You can
select the Bluetooth phone from a maxi-
mum of 4 numbers. “Empty” is displayed
when you do not register the Bluetooth
phone yet.
Bluetooth mark is displayed when you
choose the phone.
Although you can register up to 4 Bluetooth
phones in the system, one Bluetooth
phone can only function.

cxxvi
Connect the Bluetooth phone
When you turn the ignition key to “ACC”
or “ON”, the selected Bluetooth phone
will be automatically connected and the
connection result is displayed.
Leave the Bluetooth phone enable to con-
nect.
This screen appears when the Bluetooth
phone is first connected after you turn the
ignition key to “ACC” or “ON”.
Reconnect the Bluetooth phone
If the Bluetooth phone is disconnected
with a poor reception from the Blue-
tooth network when the ignition key is
turned to “ACC” or “ON”, the system au-
tomatically reconnects the Bluetooth
phone. In this case, the connection result
is not displayed.
If the Bluetooth is disconnected on purpose
such as you turned your cellular phone OFF,
this does not happen. Reconnect it by the
following methods.
Select the Bluetooth phone again.
Enter the Bluetooth phone.
Confirm the Bluetooth information
You can confirm or change the detail set-
ting of the Bluetooth phone.
Touch the “Settings” of Bluetooth to
display “Bluetooth* Information” screen.
*: Bluetooth is a trademark owned by Blue-
tooth SIG. Inc.

cxxvii
You can change the Device Name and
Passkey.
BD_ADDR is Bluetooth device address.
Do not change the Device Name to the same
name as the one of the other Bluetooth
phones. They cannot be identified.
BD_ADDR is different depending on the
system. You can confirm the address
when it cannot be identified.(i) Change the Device Name
You can change the Device Name to the
desired one from the name already regis-
tered in the system.
Touch the “Change” of Device Name to
display the “Device Name List” screen.
Select the desired name and touch “OK”.(ii) Change the Passkey
The Passkey in the system is initially
fixed. You can change the Passkey with-
in 48 figures.
Touch the “Change” of Passkey to dis-
play “Enter Bluetooth* Passkey” screen.
*: Bluetooth is a trademark owned by Blue-
tooth SIG. Inc.

cxxviii
Touch the desired key to input the Pass-
key.
Each time you touch
“”, an inputted num-
ber is deleted.
Touch
“Enter”.
(c) Delete the Bluetooth phone
1. Touch the “Settings” switch to dis-
play “Settings” screen.
2. Touch the “Delete” switch to dis-
play “Delete Telephone” screen. You can
delete the Bluetooth phone which you
registered.
Select the desired phone from the list and
touch
“OK”.

cxxix
(d) Call on the Bluetooth phone
After you enter the Bluetooth phone,
you can call by using handsfree system.
This system has 6 methods below by
which you call.
(i) By dial
You can call by inputting the telephone
number.
This cannot be operated while you are driv-
ing.
Touch the desired key to input the tele-
phone number.
Each time you touch
“”, an inputted num-
ber is deleted.
Touch
“” or push of the telephone
button.(ii) By phone book
You can call by phone book data which is
transferred from your cellular phone.
The system has two phone books. You
can register up to 500 numbers in each
book.
This cannot be operated while you are driv-
ing.
Touch the desired key to input the tele-
phone number.
1. Touch the
“Phone Book” switch to
display “Phone Book” screen.
2. Select the desired number from the
list.
Touch “” or push of the telephone
button.

cxxx (iii) By dialed numbers
You can call by dialed number. The sys-
tem memorize up to 5 dialed numbers. If
it is over than 5, the oldest number is de-
leted.
This cannot be operated while you are driv-
ing.
1. Touch the “Log” switch to display
“Outgoing Calls” screen.
When you call by phone book, the name
(if registered) is displayed.
When you call the same number continu-
ously, the newest number is only registered.2. Select the desired number from the
list.Touch “” or push of the telephone
button.

cxxxi (iv) By received calls
You can call by received calls. When a
call is received, the system memorize up
to 5 numbers. If it is over than 5, the old-
est number is deleted.
This cannot be operated while you are driv-
ing.
1. Touch the “Log” switch to display.
2. Touch the “Incoming Calls”
switch to display “Incoming Calls”
screen.
When a telephone number registered in
phone book is received, the name and the
number is displayed.
Received calls which you did not answer
are also memorized in the system and
“Abs.” is displayed on the left side of the
number.
Unnotified telephone number such as a
public telephone is not memorized in the
system.
3. Select the desired number from the
list.
Touch “” or push of the telephone
button.
A international phone call may not be
made depending on the cellular phone
which you have.