2007 TOYOTA CAMRY high beam

’07Camry_U (L/O 0608)
11
2007MY CAMRY from Oct. ’06 Prod. (OM33748U)
Headlight high beam indicator light
Turn signal indicator lights
Front fog light indicator light
Headlight indicator light
Tail light indicator light
Slip indicator light
∗
1: For details, see “Service reminder indicators and warning
buzzers” on page 146 in Section 1−6.
∗
2: If this light flashes, see “Cruise control” on page 181 in Sec-
tion 1−7.
Cruise control indicator light∗
2
Engine oil replacement reminder light∗
1
“AIRBAG ON” indicator light
“AIRBAG OFF” indicator light
Master warning light∗
1

’07Camry_U (L/O 0608)
122
2007MY CAMRY from Oct. ’06 Prod. (OM33748U)
HighLow beams—For high beams, turn
the headlights on and push the lever away
from you (position 1). Pull the lever to-
ward you (position 2) for low beams.
The headlight high beam indicator light
(blue light) on the instrument panel will
tell you that the high beams are on.
Flashing the high beam headlights
(position 3)—Pull the lever all the way
back. The high beam headlights turn off
when you release the lever.
You can flash the high beam headlights
even when the headlights are off.TURN SIGNALS
To signal a turn, push the headlight/
turn signal lever up or down to position
1.
The ignition switch must be set at ON.
The lever automatically returns after you
make a turn, but you may have to return
it by hand after you change lanes.
To signal a lane change, move the lever
up or down to the pressure point (position
2) and hold it.
If the turn signal indicator lights (green
lights) on the instrument panel flash faster
than normal, a front or rear turn signal
bulb is burned out. See “Replacing light
bulbs” on page 400 in Section 7−3.HEADLIGHTS
To turn on the following lights: Twist
the headlight/turn signal lever knob.
Position 1—Parking, tail, license plate,
side marker and instrument panel lights
The tail light indicator (green light) on the
instrument panel will tell you that the tail
lights are on.
Position 2—Headlights and all of the
above
Position 3 (“AUTO”)—Headlights and all of
the lights in the position 1
They automatically turn on or off depend-
ing on the darkness of the surroundings.
Headlights and turn signals
(for Canada)

’07Camry_U (L/O 0608)
124
2007MY CAMRY from Oct. ’06 Prod. (OM33748U)
NOTICE
To prevent the battery from being dis-
charged, do not leave the lights on
for a long period when the engine is
not running.
Daytime Running Light (DRL) system
The Daytime Running Light (DRL) system
can make it easier for others to see the
front of your vehicle during the day. The
DRL system can be helpful in many differ-
ent driving conditions, but they can be
especially helpful in the short periods after
dawn and before sunset.
The DRL system will make your headlights
come on at a reduced brightness when:
The ignition is on with the engine run-
ning.
The knob is in the “OFF” position,
position 1 or position 3 with the head-
lights off.
The parking brake is released.
To turn on the other exterior lights and
instrument panel lights, twist the knob to
position 1.
Twist the knob to position 2 to turn the
headlights to full intensity for night driving.
HighLow beams—For high beams, turn
the headlights on and push the lever away
from you (position 1). Pull the lever to-
ward you (position 2) for low beams.
The headlight high beam indicator light
(blue light) on the instrument panel will
tell you that the high beams are on.
Flashing the high beam headlights
(position 3)—Pull the lever all the way
back. The high beam headlights turn off
when you release the lever.
You can flash the high beam headlights
with the knob turned to “OFF”.

’07Camry_U (L/O 0608)
210
2007MY CAMRY from Oct. ’06 Prod. (OM33748U)
CARING FOR YOUR COMPACT DISC
PLAYER AND DISCS
Type 2 only—Your compact disc player
is intended for use with 12 cm (4.7 in.)
discs only.
Extremely high temperatures can keep
your compact disc player from working.
On hot days, use the air conditioning
to cool the vehicle interior before you
listen to a disc.
Bumpy roads or other vibrations may
make your compact disc player skip.
If moisture gets into your compact disc
player, you may not hear any sound
even though your compact disc player
appears to be working. Remove the
disc from the player and wait until it
dries.
CAUTION
Compact disc players use an invisible
laser beam which could cause hazard-
ous radiation exposure if directed
outside the unit. Be sure to operate
the player correctly.
Use only compact discs marked as
shown above. The following products
may not be playable on your compact
disc player.
Copy−protected CD
CD−R (CD−Recordable)
CD−RW (CD−Re−writable)
CD−ROMSpecial shaped discs
Transparent/translucent discs

’07Camry_U (L/O 0608)
402
2007MY CAMRY from Oct. ’06 Prod. (OM33748U)
Removing clip
Installing clip
Low beam (outside)
High beam
(inside)
1. Open the hood. Turn the bulb base
counterclockwise to the front of the
vehicle as shown.
The above illustration shows the left−hand
headlight.2. Unplug the connector while depress-
ing the lock release.
If the connector is tight, wiggle it.

’07Camry_U (L/O 0608)
413
2007MY CAMRY from Oct. ’06 Prod. (OM33748U)
26. HLP(RH) 15 A: Right−hand headlight
(high beam)
27. HLP(LH) 15 A: Left−hand headlight
(high beam)
28. HTR 50 A: Air conditioning system
29. ABS NO.1 50 A: Anti−lock brake sys-
tem, vehicle stability control system,
traction control system, brake assist
system
30. FAN MAIN 50 A (3.5 L V6 [2GRFE]
engine): Electric cooling fans
31. ABS NO.2 30 A: Anti−lock brake sys-
tem, vehicle stability control system,
traction control system, brake assist
system
32. RR DEF 50 A: Rear window defogger,
“MIR HTR” fuse
33. RR PWR SEAT 30 A: No circuit
34. HLP CLN 30 A: No circuit
35. CDS FAN 40 A (2.4 L 4cylinder
[2AZFE] engine): Electric cooling fans
36. RDI FAN 40 A (2.4 L 4cylinder
[2AZFE] engine): Electric cooling fans
37. MSB 30 A: No circuit38. ALT 120 A: “RR FOG”, “FR DEF”,
“AM2”, “ALT−S”, “MAYDAY/TEL”,
“E−ACM”, “ETCS”, “HAZ”, “IG2”, “STR
LOCK”, “DOME”, “ECU−B NO.1”, “RA-
DIO NO.1”, “EFI MAIN”, “AMP”, “DOOR
NO.1”, “EFI NO.3”, “EFI NO.2”, “S−
HORN”, “A/F”, “MPX−B”, “EFI NO.1”,
“HORN”, “H−LP(RL)”, “H−LP(LL)”, “H−
LP(RH)”, “H−LP(LH)”, “HTR”, “ABS
NO.1”, “FAN MAIN”, “ABS NO.2”, “RR
DEF”, “RR PWR SEAT”, “H−LP CLN”,
“CDS FAN”, “RDI FAN”, “MSB”, “ALT”
and “ST/AM2” fuses
39. ST/AM2 30 A: Starting system
INSTRUMENT PANEL
1. RR DOOR RH 25 A: Rear right power
window
2. RR DOOR LH 25 A: Rear left power
window
3. FUEL OPN 7.5 A: No circuit
4. FR FOG 15 A: Front fog lights
5. OBD 7.5 A: On−board diagnosis sys-
tem
6. ECUB NO.2 7.5 A: No circuit